Black Box VSP-HDMI1X2-4K Handleiding

Bekijk gratis de handleiding van Black Box VSP-HDMI1X2-4K (2 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 4 reviews. Heb je een vraag over Black Box VSP-HDMI1X2-4K of wil je andere gebruikers van dit product iets vragen? Stel een vraag

724-746-5500 | blackbox.com724-746-5500 | blackbox.com724-746-5500 | blackbox.com

Page 5Page 6

© Copyright 2014. Black Box Corporation. All rights reserved.

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc.

Intel is a trademark of Intel Corporation in the U.S.

and/or other countries.

Any other trademarks mentioned in this manual

are acknowledged to be the property of the trademark owners.

Distribute HDMI audio and

video out to two displays.

1 x 2 HDMI Splitter 4K

VSP-HDMI1X2-4K

HDMI Splitter 4K User’s Manual

Audio Auto Mixing: Automatically perform the minimum audio

format of all attached displays.

Video Inventory: After copying Video EDID, use the copied Video

EDID.

Audio Inventory: After copying Audio EDID, use the copied Audio

EDID.

3.2.2 EDID Copy

Before starting, slide the Audio/Video EDID setting switch to

position 2, 3, or 4.

Step 1. Connect the monitor (EDID compliant) to the video output

Port 1 on the splitter and power on the monitor.

Step 2. Press the “EDID COPY” button, then release it RIGHT

AFTER the LED flashes GREEN and RED (about 3 seconds).

Step 3. The LED returns to normal status indicating that EDID copy

is completed.

Otherwise, if the Status LED flashes RED, it means that:

a. The monitor is not properly connected.

b. The monitor is not powered on.

c. EDID data of the monitor is not applicable.

3.2.3 EDID Factory Default Setting

To set the EDID copy to factory default:

Step 2. Press the “EDID COPY” button, then release it RIGHT

AFTER the LED flashes GREEN twice (about 9 seconds).

Step 3. The LED returns to normal status indicating thatEDID copy

is completed.

4. Operation

The quality of the output signal depends on the quality of video

source, cable, and display device used. Low-quality cables degrade

output signals causing elevated noise levels. Use the proper cable

and make sure the display device can handle the resolution and

refresh rate selected. Interference from nearby electrical devices can

adversely affect signal quality.

Table 4-1. LED indicator functions.

LEDs 1 and 2Status

Flashing greenPower ON to Port 1 or 2

Steady greenPort 1 or 2 is outputting the data

vsp-hdmi1x2-4k_ds_rev1

1. Specifications

EnclosureMetal

TMDS Clock

Rate

300 MHz

Video

Resolution

(Maximum)

4K x 2K (3840x 2160)

User Controls(1) EDID Copy button

ConnectorsInput: (1) HDMI female,

Output: (2) HDMI female

Indicators(2) Output Status LEDs

PowerConsumption:

9–12 VDC, 220 mA

Dimensions0.8"H x 6.1"W x 2.6"D

(2 x 15.6 x 6.5 cm)

Weight0.627 lb. (0.285 kg)

NOTE: The splitter is not 4K compatible when using

Intel

®

HD 4400 based services.

5. Troubleshooting

Symptom: Video does not display

Possible Cause: Wrong installation process.

Solution: The video splitter requires at least one monitor

connection before powering on the source device.

Symptom: Erratic behavior

Possible Cause: Splitter may not receive enough power.

Solution: Check the power adapter attached to the splitter to

make sure it matches the system specifications, and is functioning

properly.

Symptom: Not receiving picture or sound.

Possible Cause: The signal source may require a display device that

is HDCP compliant.

Solution: Check if the display monitor is HDCP compliant. HDCP

prevents the transfer of digital content to unauthorized HDMI

devices.

Symptom: The display monitor is added to the unit by hot-plug,

but the video source may not support hot-plug.

Possible Cause: Check if the video source supports hot-plug. If it

doesn’t, shut down the source device and reboot it again. The

attached devices are not connected properly.

Solution: Check if you connected your components correctly.

HDMI Splitter 4K User’s Manual

Disclaimer:

Black Box Network Services shall not be liable for damages of any

kind, including, but not limited to, punitive, consequential or cost

of cover damages, resulting from any errors in the product

information or specifications set forth in this document and

Black Box Network Services may revise this document at any time

without notice.

Downloaded from manuals search enginewww.Manualslib.com

Product specificaties