Black Box AlertWerks EME1TH2 Handleiding

Bekijk gratis de handleiding van Black Box AlertWerks EME1TH2 (2 pagina’s), behorend tot de categorie Luchtbevochtiger. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over Black Box AlertWerks EME1TH2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

February 2010

MT1000A-85-R4

Measures temperature from -40 to +167° F

in 1° F increments. Measures 0 to 100% relative

humidity with 1% resolution and accuracy

of ±3% at 77° F.

AlertWerks™ Dual Temperature/Humidity Sensors

EME1TH1-001

EME1TH2-005

EME1TH3-015

To continue, turn this page over…

Humidity:

Communications Cable — RJ-45 jack to humidity sensor

using UTP CAT5 wire

Dual Sensor — Automatically detected by the hub

Measurement Accuracy — ±4.1 at -40° F, minimum ±0.9

at 25° F, ±4 at 167° F

Relative Humidity — 0 to 100%

Resolution — 1% for the hubs and 0.1% for the base units

Sensor Element — Can get wet without damage

Power — Powered by the hub (no additional power needed);

Power consumption: Typical 7.25 mWatt, 1.45 mA

Specifications

Temperature:

Communications Cable — RJ-45 jack to temperature sensor

using UTP CAT5 wire

Measurement Accuracy — Maximum ±4.1 at -40° F,

minimum ±0.9 at 68° F and ±4 at +167° F (Maximum ±2.3

at -40° C, minimum ±0.4 at 25° C and ±1.7 at +75° C)

NOTE: The Temperature/Humidity Sensors never need

calibration.

Measurement Range — -40 to +167° F (-40 to +75° C)

Measurement Rate — One reading every second

Measurement Resolution —1° F (1° C) when used with the

EME102A and EME108A; 0.9° F (0.5° C) when used with

the EME134A

Sensor Type — Semiconductor microprocessor controlled

Power — Powered by the hub (no additional power needed);

Power consumption: Typical 10.70 mWatt, 2.14 mA

Product specificaties