Black And Decker LLP120 Handleiding

Black And Decker Niet gecategoriseerd LLP120

Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker LLP120 (54 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 109 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/54

INSTRUCTION AMANUAL

20V MAX* LITHIUM ALLIGATOR LOPPER

Thank you for choosing BLACK+ ! DECKER

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.

If you have a question or experience a problem with your BLACK+DECKER purchase, go to http://www.blackanddecker.com/

instantanswers If you can’t find the answer or do not have access to the Internet, call 1-800-544-6986 from 8 a.m. to 5 p.m. EST

Mon. - Fri. to speak with an agent. Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPANOL EN LA CONTRAPORTADA.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL

PRODUCTO.

*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.

CATALOG NUMBER

LLP120

To register your new product, visit www.BlackandDecker.com/NewOwner

KEY INFORMATION YOU SHOULD KNOW:

• DO NOT OVER-TENSION CHAIN. Refer to “Chain Tension ADJUSTMENT”

for proper method of tensioning chain.

• Retighten chain frequently during first two hours of use as chain breaks in.

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The

information it contains relates to protecting YOUR SAFETY and

PREVENTING PROBLEMS. The symbols below are used to help you

recognize this information.

DANGER: Indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may result in

property damage.



Use extreme caution when cutting small size brush and

saplings because the slender material may catch the saw

chain and be whipped toward you or pull you off balance. When

cutting a limb that is under tension be alert for spring back so

that you will not be struck when the tension in the wood fibers is

released. Do not expose chain saw to rain or snow. Do not use

chain saw in damp or wet locations or while it is raining or snowing.

Do not use chain saw in the presence of flammable liquids or gases

or enclosed concentrations of dust. Cut only when visibility and light

are sufficient to see clearly



Do not let visitors contact chain saw. All visitors should be kept

away from work area.



When not in use, chain saws should be stored in a dry, and high or

locked-up place - out of the reach of children. When storing saw,

always remove battery and use a scabbard or carrying case.

or cutting edges when

picking up or holding the appliance.

It will do the job better and safer at the

rate for which it was intended.



Cut wood only. Don’t use chain saw for purpose not intended - for

example - Don’t use chain saw for cutting plastic, metal, masonry,

non-wood building materials.



Do not wear loose clothing or jewelry. Keep your hair, clothing, and

gloves away from moving parts. Loose clothing, jewelry, or long

hair can be caught in moving parts. Wear protective hair covering

to contain long hair. Air vents cover moving parts and should be

avoided. Protective non-slip gloves and non-skid footwear are

recommended when working outdoors. Always wear heavy, long

pants or other protection for your legs.



Also use safety footwear; snug fitting clothing; protective gloves;

proper hearing, respiratory, and head protection.



Carry the chain saw by the front handle with the saw stopped, finger

INTENDED USE

Your Black+Decker Alligator LopperTM has been designed for

pruning trees and cutting small logs up to 4 inches (100mm) in

diameter. This tool is intended for consumer use only.



WARNING: When using a battery operated chain saw, basic

safety precautions should always be followed to reduce risk of

fire, electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS





Cluttered areas invite injuries. Do not start cutting until you

have a clear work area, secure footing, and a planned retreat

path from the falling tree.

off the switch, the guide bar and saw chain to the rear. Remove

battery and secure latch when transporting saw.



Keep tools sharp and clean for better and safer performance. Follow

instructions for lubricating and changing accessories. Keep handles

dry, clean, and free from oil and grease.



Disconnect battery from chain saw when not in use, before

servicing, when tensioning chain, and when changing accessories

and attachments, such as saw chain.



Watch what you are doing. Use common sense. Do not operate

chain saw when you are tired, ill, or under the influence of alcohol,

drugs, or medication. Keep all parts of the body away from the saw

chain when the motor is operating. Before you start the saw, make

sure the saw chain is not contacting anything. When cutting through

wood, remember the chain saw cuts quickly and will continue its

downward or upward path. Stay out of its path.



Before further use of the chain saw, any part that is damaged

should be carefully checked to determine that it will operate

properly and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts, mounting,

and any other conditions that may affect its operation. A guard or

other part that is damaged should be properly repaired or replaced

by an authorized service center unless otherwise indicated

elsewhere in this instruction manual. Have defective switches

replaced by authorized service center. Do not use chain saw if

switch does not turn it on and off. Do not operate a chain saw that

is damaged, improperly adjusted, or is not completely and securely

assembled. Be sure that the saw chain stops moving when the

trigger is released.



WARNING: may occur when the nose or tip of 

the guide bar touches an object, or when the wood closes in and

pinches the saw chain in the cut. Tip contact in some cases may

cause a lightning fast reverse reaction, kicking the guide bar up and

back towards the operator. Pinching the saw chain along the top of

the guide bar may push the guide bar rapidly back towards the

operator. Either of these reactions may cause you to lose control of

the saw which could result in serious injury to user.





(1.) Grip Saw Firmly. Hold the chain saw firmly with both hands

when the motor is running. Use a firm grip with thumbs and fingers

encircling the chain saw handles. Chain saw will pull forward when

cutting on the bottom edge of the bar, and push backward when

cutting along the top edge of the bar.

(2.) Do not over reach.

(3.) Keep proper footing and balance at all times.

(4.) Don’t let the nose of the guide bar contact a log, branch, ground

or other obstruction.

(5.) Don’t cut above shoulder height.

(6.) Use devices such as low kickback chain and reduced kickback

guide bars that reduce the risks associated with kickback.

(7.) Only use replacement bars and chains specified by the

manufacturer or the equivalent.

(8.) Never let the moving chain contact any object at the tip of the

guide bar.

(9.) Keep the working area free from obstructions such as other

trees, branches, rocks, fences, stumps, etc. Eliminate or avoid

any obstruction that your saw chain could hit while you are cutting

through a particular log or branch.

(10.) Keep your saw chain sharp and properly tensioned. A loose

or dull chain can increase the chance of kickback. Check tension at

regular intervals with the motor stopped and battery removed, never

with the motor running.

(11.) Begin and continue cutting only with the chain moving at full

speed. If the chain is moving at a slower speed, there is a greater

chance for kickback to occur.

(12.) Cut one log at a time.

(13.) Use extreme caution when re-entering a previous cut. Engage

ribbed bumpers into wood and allow chain to reach full speed before

proceeding with cut.

(14.) Do not attempt plunge cuts or bore cuts.

(15.) Watch for shifting logs or other forces that could close a cut

Product specificaties

Merk:	Black And Decker
Categorie:	Niet gecategoriseerd
Model:	LLP120

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker LLP120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Black And Decker

Black And Decker BPZ12 Handleiding

18 Maart 2024

Black And Decker BEBLV230 Handleiding

20 Februari 2024

Black And Decker KSTR8 Handleiding

17 Augustus 2023

Black And Decker CHV1410B Handleiding

16 Juni 2023

Black And Decker PSA115B Handleiding

15 Juni 2023

Black And Decker HHVI320JR00 Handleiding

4 Juni 2023

Black And Decker HNVB115J10 Handleiding

30 Mei 2023

Black And Decker BDCS50 Handleiding

29 Mei 2023

Black And Decker BDH2000SL Handleiding

28 Mei 2023

Black And Decker 5019K Handleiding

27 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024