Black And Decker BDEL701 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Black And Decker BDEL701 (8 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
www.blackanddecker.com
English 3
BDEL701
DIAMETER OF WORK PIECE
WIDTH OF SPACE BLOCK
SPACE BLOCK
E
F
X
.3"
(8mm)
FIG.1 FIG.2
FIG.5
FIG.9
FIG.4 E
H
I
F
P
FORWARD
FIG.7
L
FIG.8
R
J
U
T
S
Y
W
V
K
J
F
H
I
LN o
A
M
G
X
ED
FIG.3
CUT-OFF END
BLOCK
C
B
F
P
A
E
FIG.6
P
E
AD
3
ENGLISH
INTENDED USE
Your Black & Decker Chop saw has been designed for
cutting & cleaning applications.
GENERAL SAFETY RULES
Warning! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term “power tool” in all of the
warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless) power
tool. SAVE THESE INSTRUCTIONS.
1. Work area
a. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD)protected supply.Use of an RCD reduces the
risk of electric shock.
NOTE: The term "Residual Curent Device (RCD)" can be
replaced by "Ground Fault Circuit Interrupter (GFCI)" or
by "Earth Leakage Circuit Breaker (ELCB)".
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
b. Use safety equipment. Always wear eye
protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Avoid accidental starting. Ensure the switch is in
the off position before plugging in. Carrying power
tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power toolin unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for which
it was designed.
b. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.Such
preventive safety measures reduce the risk of
starting the power tool accidentally
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to
SPECIFICATION
BDEL701
TECHNICAL DATA
BDEL701
2100W Chop Saw
POWER
NO-LOAD SPEED
MAX. DIAMETER
Weight
W
/min
MM
KG
2100
0-3800
355
15 .5


Product specificaties

Merk: Black And Decker
Categorie: Zaagmachine
Model: BDEL701

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker BDEL701 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaagmachine Black And Decker

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine