BenQ MX703 Handleiding
Bekijk gratis de handleiding van BenQ MX703 (8 pagina’s), behorend tot de categorie Beamer. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.3 sterren uit 21 reviews. Heb je een vraag over BenQ MX703 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8

Network Projector Operation Guide

Table of contents2
Table of contents
Preparation.......................................................................................3
Connecting the projector with your
computer ..........
..............................3 Wired connection...................................................................................................................... 3
Controlling the projector remotely through a web
browser.............................................................................................5
Supported Resolutions ....................................................................................6
PJLink Commands...........................................................................7

Preparation 3
Preparation
Your BenQ projector is equipped with the wired and/or wireless network function. You
can manage and control the projector from one or more remote computers using a web
browser when they are properly connected to the same local area network.
Connecting the projector with your computer
Wired connection
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector
and the other end to the RJ45 port on your Ethernet or router.
2. Do one of the following:
• Press NETWORK SETTING on the remote control. The Network
Settings page is displayed.
• Press MENU/EXIT and then press / until the SYSTEM SETUP:
Advanced menu is highlighted. Press to highlight Network Settings and
press MODE/ENTER. The Network Settings page is displayed.
3. Highlight Wired LAN and press MODE/ENTER.
4. Make sure the Status
is
Connect.
5. Press to highlight DHCP and press / to select On.
6. Press to highlight Apply and press MODE/ENTER.
7. Re-enter the Network Settings > Wired LAN page. The IP Address, Subnet
Mask, Default Gateway, and DNS settings will be displayed. Note down the IP
address displayed in the IP Address row.
If the IP Address still does not appear, contact your ITS administrator.
If you are in a non-DHCP environment:
1. Repeat steps 1-4 above.
2. Press to highlight DHCP and press / to select Off.
3. Contact your ITS administrator for information on the IP Address, Subnet Mask,
Default Gateway, and DNS settings.
4. Press to select the item you want to modify and press MODE/ENTER.
Wired LAN
Laptop computer
Desktop computer
Projector
RJ45 cable
RJ45 cable
RJ45 cable
Product specificaties
Merk: | BenQ |
Categorie: | Beamer |
Model: | MX703 |
Kleur van het product: | Wit |
Gewicht: | 2400 g |
Breedte: | 287.3 mm |
Diepte: | 232.6 mm |
Hoogte: | 114.4 mm |
Geluidsniveau: | 33 dB |
Gebruikershandleiding: | Ja |
Stroombron: | AC |
LED-indicatoren: | Ja |
Bluetooth: | Nee |
Plaatsing: | Plafond |
Afstandsbediening: | IR |
Oorspronkelijke beeldverhouding: | 4:3 |
USB-connectortype: | Mini-USB B |
Ethernet LAN: | Ja |
Ondersteunde video-modi: | 1080i,1080p,480i,480p,576i,576p,720p |
Geïntegreerde geheugenkaartlezer: | Nee |
Typische contrastverhouding: | 13000:1 |
Snelstartgids: | Ja |
Garantiekaart: | Ja |
Markt positionering: | Bedrijf |
Projector helderheid: | 3000 ANSI lumens |
Projectietechnologie: | DLP |
Projector native resolution: | XGA (1024x768) |
Keystone correctie, verticaal: | -40 - 40 ° |
Geschikt voor schermmaten: | 37 - 300 " |
Projectie-afstand objectief: | - m |
Aantal kleuren: | 1.073 biljoen kleuren |
Frequentiebereik horizontaal: | 15 - 102 kHz |
Frequentiebereik verticaal: | 23 - 120 Hz |
Aantal USB 2.0-poorten: | 1 |
VGA (D-Sub)poort(en): | 3 |
Aantal HDMI-poorten: | 1 |
Soort serieële aansluiting: | RS-232 |
Microfoon, line-in ingang: | Ja |
Audio-ingang (L, R): | 1 |
Composiet video-ingang: | 1 |
S-Video ingang: | 1 |
DVI-poort: | Nee |
Aantal Ethernet LAN (RJ-45)-poorten: | 1 |
Diafragma (F-F): | 2.54 - 2.73 |
Brandpuntbereik: | 18.18 - 21.84 mm |
Levensduur van de lichtbron: | 4500 uur |
Type lichtbron: | Lamp |
Ingebouwde luidsprekers: | Ja |
Gemiddeld vermogen: | 10 W |
Aantal ingebouwde luidsprekers: | 1 |
Stroomverbruik (in standby): | 0.5 W |
Hoofdtelefoonuitgangen: | 1 |
Ondersteunde beeldverhoudingen: | 4:3 |
Zoomverhouding: | 1.2:1 |
Throw ratio: | 1.64 - 1.97:1 |
Off-set: | 110 procent |
Formaat analoog signaal: | NTSC,PAL,SECAM |
Volledige HD: | Nee |
RS-232 port: | 1 |
3D: | Ja |
Lampvermogen: | 210 W |
Ondersteunde grafische resoluties: | 1024 x 768 (XGA),1600 x 1200 (UXGA),640 x 480 (VGA) |
Timeshift: | Nee |
On Screen Display (OSD): | Ja |
Levensduur van de lichtbron (besparingsmodus): | 6500 uur |
Preset modes: | 3D,Cinema,Custom,Dynamic,Presentation,sRGB |
Progressive scan uitgang: | Ja |
Geluidsniveau (spaarzame modus): | 28 dB |
AUX ingang: | Nee |
Type CardBus PCMCIA-slot: | Nee |
Inclusief DVD speler/recorder: | Niet meegeleverd |
Ingebouwde touchpad: | Nee |
Afstandsbediening inbegrepen: | Ja |
Wifi: | Nee |
AC-ingangsspanning: | 100 - 240 V |
AC-ingangsfrequentie: | 50 - 60 Hz |
Stroomverbruik (typisch): | 306 W |
Type product: | Draagbare projector |
3D Ready: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met BenQ MX703 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Beamer BenQ
15 Juni 2025
23 December 2024
9 December 2024
22 Augustus 2024
15 Mei 2024
5 Januari 2024
7 December 2023
7 December 2023
7 December 2023
7 December 2023
Handleiding Beamer
- Pyle
- Livoo
- Fun Generation
- Celly
- Philips
- Nebula
- Elite Screens
- Krüger And Matz
- Krüger&Matz
- Tzumi
- Overmax
- Eurolite
- Easymaxx
- Casio
- Dukane
Nieuwste handleidingen voor Beamer
3 Juni 2025
3 Juni 2025
23 Mei 2025
21 Mei 2025
21 Mei 2025
19 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025
14 Mei 2025