BEKO WTLJI10C1SS Handleiding

Bekijk gratis de handleiding van BEKO WTLJI10C1SS (3 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over BEKO WTLJI10C1SS of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Other functions

Troubleshooting

Cautions

During spinning, if the laundries are not placed equally in the tub, it would cause Violent vibration.

This machine has imbalance adjustment function, and the vibration testing system will supervise

the running. Once vibration is beyond certain level, the adjustment system will start automatically

to adjust the imbalance.

When water recycle function is set, after the last rinse finished, the washing machine will not drain

and spin.SPIN and WATER RECYCLE indicator light will be flashing and alarm will be given,the

washing machine will stop working (if nobody operate, the alarm will be given every 10 minutes,in

1 hour, power supply will be cut off automatically). When press PLAY/PAUSE, WATER RECYCLE

indicator light is on and the washing machine begin to drain and spin, the user can reuse the

water.

1)When child lock function is set, all the buttons will be locked including POWER. If the top lid is

opened during the washing machine working, the washing will be stopped and give an alarm. But

if you can close the top lid in 5 seconds, the alarm will stop and the washing machine will

continue working. If cannot close the top lid in 5 seconds, the washing machine will begin

draining if there is water in the inner tub, even closing the top lid is not valid. During the draining,

alarm will buzz every 10 seconds, when the water in the inner tub is about 5cm higher, alarm will

buzz every 10 minutes.When the draining is finished, the washing machine will be in the state of

waiting, if close the top lid, the washing machine is unlocked and start working as previous

setting.

2)Once child lock is set, if top lid is opened over 5 seconds during washing or rinse(there is water in

the inner tub), washing machine will drain and alarm will buzz. If you unlock the function during

draining, the washing machine will add water to water level set and continue working.

1) If you did not start the program in 10 minutes after pressing the power supply button, the

power supply will be cut off automatically.

2) After the washing is finished, alarm buzzes and the power supply will cut off automatically.

1.

Abnormal display

E1

E3

E2

F1

E4

E0

DisplayExplanation

Troubleshooting

The top lid is opened

when preset is started

Close the top lid and clear the alarm

The top lid open when

spinning

Close the top lid and clear the alarm

Spin is not balance

Open the top lid, place the laundries equally,

then close it and clear the alarm

After inflow of water for 20

minute, it still does no

treach to the water level set

Water Level sensor is

abnormal

Cut off the power supply to find a

professional staff to process

E5

child-lock light flashing

synchronously

The top lid is opened

after setting child-lock

Close the top lid and clear the alarm

After draining for 5 minutes,

it still does not reach to the

minimum of water level

2.Imbalance adjustment

3.Power supply is cut off automatically

4.Child lock function

5.Water recycle function

Please refer to Page 12 for troubleshooting

Please refer to Page 12 for troubleshooting

Cautions

FULLY AUTOMATIC WASHING MACHINE

Operation Manual

It is most important that this instruction book should be retained with the

appliance for future reference. Should the appliance be sold or transferred

to another owner, or should you move house and leave the appliance, always

ensure the book is supplied with the appliance in order that the new owner

can get to know the functioning of the appliance and the relevant warnings.

These warnings have been provided in the interest of safety. You must read

them carefully before installing or using the appliance.

10.0kg

WTLJI10C1SS

Preparation before operationLoad laundries

Notes ：If there is still a fault after the above checks, please pull out the plug and

contact the seller right away. It is dangerous to repair this product by

yourself.

Normal

Normal

Close the top lid

Close the top lid

Control panel has

no display

Plug is not inserted tightly

No electricity in the socket

Power switch is not turned on

Power supply is cut off

Inlet hose leaks

Inlet hose connector(connecting

with the tap)is not fixed tightly

Inlet hose and washing machine

connector is loose

Before contacting the technicians, please make the following checks:

PhenomenaPossible reason

It does not drain

Drainpipe is not put down

Drainpipe is bended or get blocked

No inflow of water

No water supply

Tap is not open

Inlet hose gets blocked

Spin stops and

water inflow begins

during spin program

Laundries is too much or too little

or the Machine is not place stably

Press the program

button to select

SPIN, but It does

not spin

Top lid was not closed when drain

is finished

Top lid was open when drain is

started

The spin is intermittent

when spin starts

Balance the laundries to reach to

the best spin effect

First time use, some

water flows out from

the drainpipe

The remaining water from factory’s

testing

Insert the plug tightly

Check the socket or change to

another socket

Press power switch

Check power supply

Install the inlet hose again

Tighten the connector of the

machine

Put down the drainpipe

Straighten or clean the drainpipe

Restart when water supply is

resumed

Open the tap

Clean the filter according to

before“clean inlet gate”

The machine is adjusting

automatically

Troubieshooting

Specification

Weight

220-240V~ 50Hz

Rated voltage and

frequency

Rated capacity of wash

and spin

Water level/water volume

(about)

Inlet pressure

WTLJI10C1SSModel

Rated input power

Product Dimensions

Wash：525W

spin：330W

0.03MPa-0.85MPa

10.0 kg

10/71L 9/65L 8/60L 7/55L

6/50L 5/45L 4/41L 3/37L

2/33L 1/29L

About 35kg

W564mm D578mm H968mm

Please insert the plug into the power socket

with rated voltage 230V A/C.

Do not make the electric cable bended, stretched, twisted, strapped or

changed, pressed or nipped. If the supply cord is damaged, it must be

replaced by the manufacturer,its service agent or similarly qualified

persons in order to avoid a hazard. The pin of the plug must remain

clean. Please clean it carefully with dry cloth if it is dirty.

Do not use water hotter than 50℃

Ventilation holes

at the bottom

Soft item

Do not share the same socket with other electric

appliances. Do not use the damaged plug or loose

socket.

Warning

Symbol definition

Always unplug the appliance and turn off

the water when the power is cut, moving or

cleaning the washing machine, or it is not in

use. Do not insert or pull off the plug with

wet hand.

Do not wash raincoat, bike cover, feather

dress and waterproof laundries, which will

caused the washing machine to have

abnormal vibrations during spinning.

Don t install the washing machine in

bathroom or damp places. Do not wash the

machine with water, do not put wet clothes

on the control panel film.

If the machine is situated on a carpeted

floor, please adjust the feet in order to allow

air to circulate freely.

Forbidden

Pay special attention to the

warning symbols. There may be

serious risks to personal body

safety or damages to the washing

machine if not follow.

Please stop doing the contents with

this symbol, otherwise it will damage

the appliance or injure your personal

body.

Do not put hands into the working machine.

It is dangerous even if the speed is very slow.

Take special care of the children, and forbid

them to climb on the washing machine.

It is dangerous to alter the specifications or

attempt to modify this product in any way.

Do not overload the appliance or put any

hotgoods(such as the kettle with hot water)

on thewashing machine.

Garments which have been in contact with

volatile petroleum products should not be

machine washed.

Keep the appliance away from direct

sunlight and heat sources like the heater.

Before washing, please ensure the tap is open

and the inlet hose is installed properly.

It is suggested to use low foam washing powder.

This appliance is not intended for use by

persons(including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

Children should be supervised to ensure that

they do not play with the appliance.

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp

material can cause extensive damage and must not be placed into the machine.

Preparation before washing

1. Connect the inlet hose and open the tap.

2. This appliance must be earthed. Confirm

the socket is earthed reliably and insert the

power plug. The earth terminal should not

link to gas pipeline, tap pipeline etc.

3. Put down the drainpipe.

Warning: the temperature of the water should be less than 50℃！

Before washing the laundries, please pay attention to the

followings:

Make sure if

there is special

requirements for

the laundries

Before washing,

empty all pockets of

small objects which

may have been left

inside(coins, keys,

screws etc.).

Knot the long

band, fasten the

buttons and close

the zippers.

Do not overload

the machine.

Load the laundry

loosely alternating

large items with

small ones.

Sort the laundry

according to the

type of fabric,

color-fastness and

how dirty it is. Put

thin laundries,

woolens and such

prone to wear and

tear laundries into

washing bag.

A. Make sure the laundries are washable.

B. It is essential to wash new colored items separately when washing for the first time. White

items should not be washed with colored items.

C. Please immerge the non-absorbable laundries by hand.

D. Some stains such as fruit, wine, grass, rust etc. are difficult to remove and should be t

reated before washing with specific products, which can be found in most household shops.

In some cases it may help to soak the stain before washing with a special pre-soak product

or biological detergent.

E. Overturn the nap fabric and long floss laundries before putting them into the machine.

F. Do not put the laundries polluted by chemicals into the machine directly.

G.Very small item(handkerchiefs, ribbons, socks etc) should be washed in a washing bag or a

pillow case.

The capacity of washing and spinning of the machine is refer

to the largest weight of the standard laundries under dry

condition. Washing quantity shall be lower than the rated

capacity. The maximum capacity of this machine is 10.0kg.

Different thickness, size and type of the laundries will

influence the actual washing capacity.

Do not select high water level when laundries are less than

1.5kg to avoid water splashing.

Use of detergent

Howtousethewashingpowder

How to use softener

Howto use bleach

The machine automatically adds the softener

to the inner tub during the last "rinse" process.

pls put the needed washing power

in the detergent box and softener in

softener box evenly

Softener box

Dissolve in the machine directly（not suitable

for preset program）

1. Low water level.

2. Add the washing powder, and run for 30

seconds to dissolve it completely.

3. Put laundries in and select suitable water

level.

The instant dissolving of the washing powder

1. Prepare warm water of 30℃ in a container.

2. Pour the powder while stirring to fully

dissolve it.Washing powder with poor quality or

not used for a long period may get blocked,

please clean the detergent box in time.

Fill water to the selected level,

dilute the bleach in the container,

and pour it slowly into the washing

tub.

Do not use bleach for colored or

figured laundries as they are prone

to lose colors.

Do not put bleach to laundries

directly.

Refer to the manual for the usage

and quantity of the bleach.

Please dissolve powder bleach

before use.

Remarks：avoid splashing of water and waste of washing powder, water level should not

be too high if laundries are too small.

Product specificaties