BEKO TB621DAESEE Handleiding
Pagina's 63 Wasmachine
Bekijk de handleiding van BEKO TB621DAESEE gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
1 Programme selector / “ON/OFF”
2 “Temperature“ button
3 “Spin“ / “Rinse hold” button
4 “Fast / Intensive” / Child Lock
3 sec
button
5 “Steam Option” / “AntiCrease+”
button
6 “Pet Hair Removal” / “Prewash”
3 sec
button
7 “Time Delay” button
8 “Start/Pause“ button
INDICATORS
Door locked
Child lock
Time Delay
Failure: Water tap closed
CONTROL PANEL
PROGRAMME CHART
PRODUCT DESCRIPTION
1. Lidhandle
2. Lid
3. Control panel
4. Detergent dispenser
5. Drum
6. Water lter - behind the cover
7. Mobility lever (depending on model)
8. Adjustable feet (x2)
5.
1.
6.
7.
2.
3.
4.
8.
EN
Quick guide
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bracket is removed.
For more detailed instructions on how to remove it, see the Installation Guide.
* After programme end and spinning with maximum selectable spin speed, in default
programme setting.
** The duration of the programme is shown on the display.
- The sensor technology adapts water, energy and programme duration to your wash load.
Eco 40-60 - Test wash cycle in compliance with 2019/2014 regulation. The most ecient
programme in terms of energy and water consumption for washing normally soiled cotton
laundry. Display only: Spin speed values shown on the display can slightly diers from the
values stated in the table
For all Test Institutes
Long wash cycle for cottons: set wash cycle Cottons with a temperature of 40°C.
Synthetic program along: set wash cycle Synthetics with a temperature of 30°C.
This data may dier in your home due to changing conditions in inlet water temperature,
water pressure etc. Approximate programme duration values refer to the default setting of
the programmes, without options. The values given for programmes other than the eco 40-
60 programme are indicative only.
THANK YOU FOR BUYING A BEKO PRODUCT.
1
234567
8
DETERGENT DISPENSER
Main wash compartment
Detergent for the main wash, stain remover or water
softener.
Prewash compartment
Detergent for the prewash.
Softener compartment
Fabric softener. Liquid starch. Bleach.
Pour in softener, starch or bleach solution only
up to the “max” mark.
Release / Close
button
Press to remove tray for cleaning.
Press to close tray until you feel a click!
click!click!
click!click!
Max load 6,0 Kg
Power consumption in o-mode 0,50 W / in left-on mode 0,50 W
Detergents and additives
Recommend-
ed detergent
Residual
dampness % *
Energy
consumption kWh
Total water lt
Laundry
temperature °C
Programme
Temperatures
Max.
Spin speed
(rpm)
Max
load (kg)
Duration
(h : m)
Prewash
Main
wash
Softener
PowderLiquid
SettingRange
Cottons
40 - 901200603:30
571,1507540
20 - 901200603:30
570,1807520
Eco 40-60
4040 - 60
1100603:15-
500,6095238
1151302:35-
520,3514033
11511,502:15-
580,1593023
Synthetics
40 - 601200302:30
350,5506640
Cottons with Prewash
40 - 9012006**
----
Xpress & Super Xpress
30 - 901200600:28-
620,1005023
Gentlecare
40 - 408001,5**-
-
----
Mix
40 - 408003**
----
Spin+Drain
----12006**---------
Rinse
----12006**--
------
Drum Clean
90906000**-
-
----
DarkWash/Jeans
40 - 4012003**
----
Stain
6030 - 6012003,5**
----
Shirts
40 - 608003**
----
Hygiene+
6020 - 9012006**-
----
ColdWash
202012003,5**-
----
Dosing required Dosing optional
3
Time displayed by machine in the beginning of cycle is for the most used load size. It means that can be dierent from values for maximum load inside instruction for user.
PROGRAMMES
For choosing the appropriate programme for your kind
of laundry, always respect the instructions on the care
labels of the laundry. The value given in the tub symbol
is the maximum temperature possible for washing the
garment.
Cottons
Normally to heavily soiled and robust cottons .
Eco 40-60
For washing normally soiled cotton garments declared to be washable
at 40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most efficient in terms of water and energy
consumption.
AThe cycle runs only at 40°C as per regulation.
Synthetics
For washing soiled garments made from synthetic fibres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
Cottons with Prewash
Choose this program only for heavily soiled cotton laundry. Put
detergent in the prewash compartment
Xpress & Super Xpress
Use this programme to wash your lightly soiled or unspotted cotton
clothes in a short time but not for towels or heavy cottons. The
programme duration can be reduced down to 14 minutes when the
quick wash function is selected. When the quick wash function is
selected, maximum 2 (two) kg of laundry must be washed.
GentleCare
Use to wash your woollen/delicate laundry. Select the appropriate
temperature complying with the tag of your clothes. Your laundry will
be washed with a very gentle washing action in order not to damage
the clothes.
Mix
For washing lightly to normally soiled resilient garments in cotton,
linen, synthetic fibres and mixed fibres.
Rinse
Separate rinse and intensive spin programme. For robust laundry.
Spin & Drain
Spins the load then empties the water. For robust laundry.
Drum Clean
Regularly clean (once every 1 to 2 months) the drum for ensuring the
required hygiene. Steam is applied before the programme to soften
the residues in the drum. Turn on the programme when the machine is
completely empty. For better results, use powder antilimescale (drum
cleaning materials) suitable for washing machines when the powder
detergent function is selected. Leave the loading door open after the
programme ends for the inside of the machine to dry.
AThis is not a washing programme. This is a maintenance programme.
Do not turn this programme on when there is something inside the
machine. When you attempt to operate, the machine automatically
senses that there is load inside, and may quit or resume the programme
as per the model of your machine. An effective cleaning is not achieved
if the programme is resumed.
AThis program should not be used with POD detergents.
DarkWash/Jeans
This programme uses lower temperatures and less agitation to prevent
your darker garments fading.
Stain
The machine has a special stain programme which enables the
removal of different types of stains in the most effective way. Use this
programme only for durable colourfast cotton laundry. Do not wash
delicate and noncolourfast clothes and laundry in this programme.
Before washing, garment tags should be checked (recommended for
cotton shirts, trousers, shorts, tshirts, baby clothes, pyjamas, aprons,
table clothes, bed sheets, duvet covers, pillowcases, bathbeach towels,
towels, socks, cotton underwear that are suitable for washing at high
temperature and long time).
In the automatic stain programme, you can wash 24 types of stains
divided into three different groups according to quick function
selection. Depending on the selected stain group, a special washing
programme for which duration of rinse hold, washing action, washing
and rinsing duration are modified.
Below you can find the soil groups that can be selected with the “Fast/
Intensive” setting button:
When “Intensive” is selected; Sweat, collar dirt, food, mayonnaise, salad
dressing, makeup, machine oil, baby food.
When “Fast/Intensive” is not selected; Blood, chocolate, pudding, grass,
mud, eggs, butter, curry.
When “Fast” is selected; Tea, coffee, juice, ketchup, red wine, cola,jam,
coal.
1. Select the stain programme.
2. Select the stain you want to clean by locating it in the groups above
and selecting the related group with the Fast/Intensive auxiliary
function button.
3. Read the garment tag carefully and ensure that correct temperature
and spin speed are selected.
Shirts
This programme is used to wash the shirts made from cotton, synthetic
and synthetic blended fabrics altogether. Use the special shirts wash
cycle to wash shirts in different fabrics and colours to guarantee they
receive the best possible care.
Hygiene +
A programme that blends sensitive temperature control with
additional rinse and spin cycles to make sure any microorganism is
removed from laundry. Working at a range of 20 °C to 90 °C.
ColdWash
Use to wash your medium dirty and durable cotton/syntetics laundry.
Thanks to the washing alghoritm specially developed for the program,
effective washing is ensured without exposing the laundry to high
temperatures.
FIRST TIME USE
ADo not use POD detergents for this step.
To remove any manufacturing debris select the “Cotton“ programme
at a temperature of 90°C. Pour a small quantity of detergent powder
into the main wash compartment of the detergent dispenser
(maximum 1/3 of the quantity the detergent manufacturer
recommends for lightly soiled laundry). Start the programme without
adding any laundry.
DISPLAY
The display is useful when programming the washing machine and
provides plenty of information.
3
2
9
1
7
12
4
6
8
10
5
11
7. Water tap indicator
8. Rinse Hold Indicator
9. No Spin Indicator
10. Auxiliary Options Indicators
11. Child Lock Enabled Symbol
12. Time Delay Enabled
1. Temperature Symbol
2. Spin Speed Indicators
3. Duration Information
4. Door Lock Is Engaged Symbol
5. Wash phases indicators
6. No Water Indicator
! The visuals used for machine description in this section are schematic
and may not match exactly with the features of your machine.
DAILY USE
Prepare your laundry according to the recommendations in the “HINTS
AND TIPS“ section. Load the laundry, close the drum door and check
that it is closed properly. Pour in the detergent and any additives.
Observe the dosing recommendations on the detergent pack. Close
the lid. Turn the programme selector to the desired programme and
select any option if needed. The display shows the duration of the
selected programme (in hours and minutes). The temperature and spin
speed can be changed by pressing the “Temperature“ button or the
“Spin“ button. Open the tap and press the “Start/Pause“ button to
start the wash cycle. The “Start/Pause“ indicator will lights up on
the display and the door will be locked. Due to variations in load and
temperature of inlet water, the remaining time is newly calculated in
certain programme phases.
PAUSE OR CHANGE A RUNNING PROGRAMME
Press the Start/Pause button to switch the machine to pause mode.
Start/Pause symbol will flash on the display.
The programme change is allowed when the current programme is
running unless the Child Lock is enabled. This action will cancel the
current programme.
Adding laundry after the programme has started: If the water level in
the machine is suitable when you press Start/Pause button, the door
lock will be deactivated and the door will open, allowing you to add
garments. The door lock icon on the display goes off when the door
lock is deactivated. After adding garments, close the door and press
Start/Pause button once again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/
Pause button, the door lock cannot be deactivated and the door lock
icon on the display remains on.
If the temperature of the water inside the machine is above 50°C, you
cannot deactivate the door lock for safety reasons, even if the water level is
suitable.
DOOR LOCK INDICATOR
There is a locking system on the loading door of the machine that
prevents opening of the loading door in cases when the water level
is unsuitable. “Door Locked” symbol appears on the display when the
loading door is locked.
PROGRAMME END
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch
to OFF mode. Display and all indicators are turned off.
Completed programme steps will be displayed if you press On/Off
button.
OPTIONS
!When the combination of programme and additional option(s) is not
possible, the indication lights switch o automatically.
! Unsuitable combinations of options are deselected automatically.
Fast / Intensive
You can shorten or extend the programme duration with this function.
Depending on the programme selection, there may be dierences in
time increases and decreases.
In case the FAST or INTENSIVE led is not lit, the appropriate programme
duration is shown for your normally soiled clothes/laundry.
Depending on the programme selection, the Intensive feature can be
selected automatically. In this case, the Intensive LED on the panel will
be lit. You can use the Intensive selection to achieve a better washing
performance when washing heavily soiled laundry.
You can reduce the time for your lightly soiled laundry by pressing the
Fast/Intensive button in the programmes which come with intense
being selected. When you press the button once, the LED will turn o
and you will reach the appropriate programme duration for your
normally soiled clothes/laundry. When you press the same button a
second time, the fast LED will light up, the time will decrease a little and
it will show the minimum programme duration, which is suitable for
your less soiled laundry. The duration of programmes may shorten by
50% when this function is selected. Thanks to optimized washing steps,
high mechanical agility and optimal water consumption, high washing
performance is achieved despite the shorter duration.
Steam
The steam option feature utilises the power of steam to enhance the
cleaning process. The steam produced by the washing machine helps
to break down and loosen tough stains, making them easier to remove
during the wash cycle. It provides a more delicate treatment than harsh
scrubbing or abrasive washing methods. The steam helps to relax the
fibers, reducing the risk of damage or excessive wear on your clothes.
*This function may not be available on all models.
AntiCrease+
Select this option if you cannot unload the laundry soon after
programme end, or if you tend to forget the laundry in your washing
machine. It will help to keep your laundry fresh. The washing machine
will start to tumble the laundry periodically after programme end. The
periodic tumbling will last up to approximately 6 hours after the end of
your wash programme, and you can stop it at any time by pressing the
“AntiCrease+“ button. It will last a while until you can open the door.
After the “AntiCrease+“ period has run out, the display indicates .
Pet Hair Removal
Selecting this function adds Prewash and Extra Rinse to the standard
program. More water is used, ensuring pet hair is removed more
effectively from your clothes.
Prewash
3 sec
This function can be selected by pressing and holding the related
auxiliary function button for 3 seconds. A Prewash is only worthwhile
for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
Time Delay
When the time delay function is selected, the end time until
the programme end is shown in hours such as 1h, 2h, after your
programme starts is shown in hours and minutes as in the 01:30
example. With the Time Delay function, the end time of the
programme may be set up to 24 hours. After pressing Time Delay
button, the programme’s estimated ending time is displayed. If the
Time Delay is set, Time Delay indicator is illuminated. In order for the
End Time function to be cancelled, turn the machine Off and back On
by rotating the program selection knob to the On/Off position.
Temperature
Whenever a new programme is selected, the recommended
temperature for the pro-gramme appears on the temperature
indic-ator. It is possible that the recommended temperature value is
not the maximum temperature that can be selected for the current
programme. Press the Temperature Adjustment button to change the
temperature. Temperature decreases gradually. You can also change
the temperature after the washing starts. This change can be made if
the only washing steps allow it.
Spin (incl. Rinse hold )
Whenever a new programme is selected, the recommended spin speed
of the selec-ted programme is displayed on the Spin Speed indicator.
It is possible that the re-commended spin speed value is not the
maximum spin speed that can be selected for the current programme.
Press the Spin Speed Adjustment button to change the spin speed.
Spin speed de-creases gradually. Then, depending on the model of the
product, “Rinse Hold “ and “No Spin“ options appear on the display.
If you are not going to unload your laundry immediately after the
programme com-pletes, you can use Rinse Hold function in order to
prevent them from getting wrinkled when there is no water in the
machine. This function holds the laundry in the final rinsing water. If
you want to spin your laun-dry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start / Pause. The programme will resume. Machine drains the
water and spins the laundry.
If you want to drain the water at the end of the programme without
spinning, use No Spin function.
You can change the spin speed after the washing starts if the washing
steps allow it. Changes cannot be made if the steps do not allow it.
CHILD LOCK
3 sec
You can lock the buttons of the control panel against improper use (e.g.
by children). Press and hold the related auxiliary function button for
3 seconds. After the countdown as “3-2-1” on the display is over, Child
Lock symbol appears on the display. When this warning is displayed,
you can release the Auxiliary Function button 3. To deactivate the child
lock press and hold the related auxiliary function button for 3 seconds.
After the countdown as “3-2-1” on the display is over, Child Lock symbol
disappears.
BLEACHING
Wash your laundry in the desired programme, Cotton or Synthetics
, adding an appropriate amount of chlorine bleach to the Softener
chamber (close the lid carefully). Immediately after the end of the
programme, turn the “Programme selector” and start the desired
programme again to eliminate any residual bleach smell; if you want,
you can add softener. Never put both chlorine bleach and softener
into the softener chamber at the same time.
HINTS AND TIPS
Sort your laundry according to
Type of fabric/care label (cotton, mixed fibers, synthetics, wool, handwash
items). Colour (separate coloured and white items, wash new coloured
items separately). Delicates (wash small items – like nylon stockings – and
items with hooks – like bras – in a cloth bag or pillow case with zip).
Empty all pockets
Objects like coins or lighters can damage your laundry as well as the
drum.
Appliance interior
If you never or seldom wash your laundry at 90°C, we recommend to
occasionally run a 90°C programme without laundry, adding a small
amount of detergent, to keep the interior of the appliance clean.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of
surplus detergent
Use low temperature and longer duration
The most efficient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
“PROGRAMME CHART” table to save water and energy.
Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning
speed in the spinning phase, the higher the noise and the lower the
remaining moisture content.
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch off and unplug the washing
machine. Do not use flammable fluids to clean the washing machine.
Clean and maintain your washing machine periodically (at least 4 times
per year).
Cleaning the outside of the washing machine
Use a soft damp cloth to clean the outer parts of the washing machine.
Do not use glass or general purpose cleaners, scouring powder or similar
to clean the control panel – these substances might damage the printing.
Detergent dispenser
Clean regularly, at least three or four times a year, to prevent detergent
build-up:
Press the release button to release the detergent
dispenser and remove it. A small quantity of water
can remain in the dispenser, thus you should carry
it in an upright position. Wash the dispenser using
running water. Remove the siphon cap on the back
of the dispenser for cleaning. Replace the siphon cap
in the dispenser (if removed) Reinstall the dispenser
by locating the dispenser’s bottom tabs into the
appropriate openings on the lid, and by pushing the
dispenser against the lid until it locks into place.
Press on the close button
until you feel a click!.
Make sure that the detergent dispenser is correctly
reinstalled.
Checking the water supply hose
Check the inlet hose regularly for brittleness and cracks. If damaged,
replace it by a new hose available through our After-Sales Service or
your specialist dealer. Depending on the hose type: If the inlet hose has
a transparent coating, periodically check if the colour intensifies locally.
If yes, the hose may have a leak and should be replaced. For water stop
hoses (If available): check the small safety valve inspection
window (see arrow). If it is red, the water stop function was triggered, and
the hose must be replaced by a new one. For unscrewing this hose, press
the release button (if available) while unscrewing the hose.
EN
Quick guide
Alle foutcodes BEKO Wasmachine 17 foutcodes uit 17 handleidingen, met hun betekenis.
Product specificaties
| Merk: | BEKO |
| Categorie: | Wasmachine |
| Model: | TB621DAESEE |
Heb je hulp nodig?
Als je hulp nodig hebt met BEKO TB621DAESEE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden