Behringer Ultra Tremolo/Pan TP300 Handleiding

Behringer Gitaar Ultra Tremolo/Pan TP300

Lees hieronder de 📖 handleiding in het Nederlandse voor Behringer Ultra Tremolo/Pan TP300 (2 pagina's) in de categorie Gitaar. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
ULTRA TREMOLO/PAN TP300
Classic Stereo Tremolo/Panner Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA TREMOLO/PAN TP300.
This high-quality eects pedal is designed to provide guitarists easy-to-use tremolo and panning
eect styles. Thanks to its high-performance features you get the classic, warm and mind-bending
tremolo/panning eects of vintage ‘60s amps.
The tremolo eect is achieved by periodic modulation of the input signal level. This results in a
continuous change from low to high level that has a quivering, tremulous sound character. In panning
mode the signal is periodically moved from one side of stereo image to the other.
1. Controls
(1) The switch selects between 2 tremolo modes and 2 panning modes.MODE
PAN: Signal uctuates between the left and right side of the stereo image. For this eect both
outputs (stereo) have to be used. In Triangle Wave mode the signal uctuates smoothly while in
Square mode it changes sharply.
TREMOLO: Periodic changes of the signal level. In Triangle Wave mode the signal level uctuates
smoothly while in Square mode it changes sharply.
(2) The control adjusts the amount of uctuation concerning the signal level (TREMOLO) DEPTH
and signal position (PAN).
(3) The control adjusts the speed of the uctuation concerning the signal level (TREMOLO) RATE
and signal position (PAN).
(4) The displays the speed of the eect determined with the RATE control (ashes).RATE LED
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(5)
(1)
(4)
(6)
(2)
(3)
(8) (7)
ULTRA TREMOLO/PAN TP300
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
(7) Use the ¼" TS and connectors to plug in the instrument cables. For mono use plug in IN A only.IN A IN B
(8) The two ¼" TS and connectors send the signal to your amp. Use both connectors if OUT A OUT B
you want to achieve full stereo eect. For mono use plug in OUT A only.
Use the connection to plug in a 9 V power supply (not included). DC IN
The is located underneath the pedal cover. To install or replace the 9 V battery BATTERY COMPARTMENT
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
The TP300 has no on/o switch. As soon as you insert the plug into the in connector,
the TP300 is on. When not in use, remove the plug from the in connector. This extends
the life of the battery.
The is located at the underside.SERIAL NUMBER
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
In A
Connector ¼" TS
Impedance 500 k
Impedance mono 250 k
In B
Connector ¼" TS
Impedance 500 k
Out A / Out B
Connector ¼" TS
Impedance 1 k
Power Supply
Power consumption 30 mA
BEHRINGER PSU-SB
Mains Connection
Connector mains plug
Voltage 100 V - 230 V, 50/60 Hz
Device Connection
Connector 2 mm DC jack,
negative center
Voltage 9 V𝌂
Current 100 mA regulated
Battery Power Supply
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.


Product specificaties

Merk: Behringer
Categorie: Gitaar
Model: Ultra Tremolo/Pan TP300

Heb je hulp nodig?

Als je hulp nodig hebt met Behringer Ultra Tremolo/Pan TP300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden