Behringer Ultra Octaver UO300 Handleiding

Bekijk gratis de handleiding van Behringer Ultra Octaver UO300 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 33 mensen en kreeg gemiddeld 4.6 sterren uit 7 reviews. Heb je een vraag over Behringer Ultra Octaver UO300 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ULTRA OCTAVER UO300

3-Mode Octaver Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA OCTAVER UO300.

This high-quality eects pedal creates a monster sound by adding two additional tones using your

guitar—one and two octaves below the original tone. Thanks to its high-performance features you’ll

get natural, clear octave sounds with constant pitch, even for staccato playing.

Octave eect is possible due to a circuitry that generates signals one or more octaves below the input signal.

1. Controls

(1) The selector allows you to optimize the eects pedal for HIGH, MID and LOW frequencies RANGE

and use instruments with dierent frequency ranges (guitar, bass guitar, keyboard, etc.)

(2) The control adjusts the level of the original input signal.DIRECT

(3) The control adjusts the level of the generated signal one octave below the original signal.OCT 1

(4) The control adjusts the level of the generated signal two octaves below the original signal. OCT 2

(5) The blue LED illuminates when the eect is activated. It also serves as a battery level indicator.ON/BATT

(6) Use the footswitch to activate/deactivate the eect.

(7) Use this ¼" TS connector to plug in the instrument cable.IN

(8) The ¼" TS connector sends the signal to your amp.OUT

Use the connection at the front of the unit to plug in a 9 V power supply (not included). DC IN

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,

press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

◊ The UO300 has no on/o switch. As soon as you insert the jack into the in connector,

the UO300 begins running. When not using the UO300, remove the jack from the

in connector. This extends the life of the battery.

The is located at the bottom.SERIAL NUMBER

(5)

(1)

(7)

(4)

(6)

(3)(2)

(8)

Product specificaties