Behringer Super Fuzz SF300 Handleiding

Bekijk gratis de handleiding van Behringer Super Fuzz SF300 (23 pagina’s), behorend tot de categorie Gitaar. Deze gids werd als nuttig beoordeeld door 61 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over Behringer Super Fuzz SF300 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SUPER FUZZ SF300

3-Mode Fuzz Distortion Eects Pedal

Thank you for showing your condence in us by purchasing

the Behringer SUPER FUZZ SF300. This eects pedal is ideally suited

for electric guitars and recreates the whole variety of famous fuzz tones

of the ‘60s and ‘70s.

1. Controls

(1) The LEVEL control adjusts the output level.

(2) The control allows you to boost/cut the TREBLE

high-frequency range.

(3) The BASS control allows you to boost/cut the low-frequency range.

(4) The GAIN control adjusts the gain for more distorted sounds.

(5) The switch lets you choose between 3 eect modes.MODE

FUZZ 1: Basic fuzz sound with emphasis on the midrange.

FUZZ 2: Full-bodied fuzz sound with scooped mids

and sharp harmonics.

BOOST: The Level control is inactive and the Gain control adjusts

the boost.

(6) The LED illuminates when the eect is activated. ON/BATT

It also serves as a battery level indicator.

(7) Use the footswitch to activate/deactivate the eect.

(8) Use this ¼" TS connector to plug in the instrument cable.IN

(9) The ¼" TS connector sends the signal to your amp.OUT

Use the connection to plug in a 9 V power supply (not included). DC IN

The BATTERY COMPARTMENT is located underneath the pedal cover.

To install or replace the 9 V battery (not included), press the hinges with a

ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.

V 1.0

(1)

(3)

(9)

(5)

(6)

(8)

(7)

(2)

(4)

Product specificaties