Behringer NR300 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Behringer NR300 (32 pagina's) in de categorie Gitaar. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
NOISE REDUCER NR300
Ultimate Noise Reduction Eects Pedal
Thank you for showing your condence in us by purchasing the Behringer
NOISE REDUCER NR300. This ultimate eects pedal is specically designed
to eliminate unwanted noise and hum without altering your tone. Thanks
to its high-performance features it preserves the original attack and
envelope while leaving your playing and dynamics intact.
1. Controls
(1) This MODE switch allows you to chose between MUTE
and mode. Pressing the pedal in MUTE mode REDUCTION
results in muting the whole input signal, to reduce noises
in during pauses for exam ple. In REDUCTIO N mode,
quiet passages (when noise or hum would get obvious
to the listener) are eectively reduced. Adjustm ents
to threshold and decay settings are necessary in this case
(see below).
(2) Use the (old) control to dene a level threshold THRESH
in REDUCTION mode. When the input signal falls below
this value, the unit star ts reducing the signal.
(3) The DECAY control determines how fast the signal reduction
is released when the input signal exceeds the threshold
value again.
(4) The MUTE/BATT LED illuminates when the eect is activated.
It also serves as a battery level indicator.
(5) The LED illuminates when the input level falls REDUCTION
below the threshold and starts getting reduced.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS connector to plug in the instrument cable.IN
V 2.0
(1)
(8)
(9)
(4)
(3)
(5)
(7)
(10)
(6)
(2)
2NOISE REDUCER NR300
(8) The ¼" TS connector sends the signal to your amp.OUT
(9) Use this ¼" TS connector to connect it to the input SEND
of an external eect unit. This way you can feed in an eect
signal while simultaneously eliminating noises from the unit.
(10) The ¼" TS connector is used to feed in the external RETURN
eect signal.
Use the connection to plug in a 9 V power supply (not included). DC IN
The is located underneath the pedal cover. BATTERY COMPARTMENT
To install or replace the 9 V battery (not included), press the hinges
with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.
The NR300 has no on/o switch. As soon as you insert the
jack into the in connector, the NR300 begins running.
When not using the NR300, remove the jack from the in
connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at community.musictribe.com/pages/
support#warranty.
4. Specications
In
Connector ¼" TS
Impedance 500
Out
Connector ¼" TS
Impedance 1 kΩ
Send
Connector ¼" TS
Impedance 1 kΩ
Return
Connector ¼" TS
Impedance 50 kΩ
3NOISE REDUCER NR300
Power Supply
9 V , 100 mA DC regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs/0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result
of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may therefore differ from those listed or shown.


Product specificaties

Merk: Behringer
Categorie: Gitaar
Model: NR300
Gewicht: 330 g
Breedte: 70 mm
Diepte: 123 mm
Hoogte: 54 mm
Soort: Effectpedaal
Correct gebruik: Concert/studio

Heb je hulp nodig?

Als je hulp nodig hebt met Behringer NR300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden