Becken Efficient Power Care BSI-1604 Handleiding

Becken Strijkijzer Efficient Power Care BSI-1604

Lees hieronder de 📖 handleiding in het Nederlandse voor Becken Efficient Power Care BSI-1604 (14 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
Instructions Manual
Manual de Instrucciones
Manual de Instruções
Steam Iron
Plancha de Vapor
Ferro a Vapor
Eicient Power Care
5
EN
Steam Iron | Plancha de Vapor | Ferro a Vapor
1.1. Power Supply
Make sure the main voltage is compable with the appliance’s. If this is not the case
please consult the Customer Support Service.
1.2. Power Cord and Other Cables
Do not tangle the cord or pull it to disconnect the appliance. Also, keep the cord away
from warm surfaces.
Never use the appliance if it has a damaged cable or socket.
Take it to the Technical Support Service for replacement.
1.3. Humidity and Water
Do not use your appliance in humid places. Do not allow the appliance to become wet
under any circumstances as this may be dangerous. To avoid re hazard or electric
shock do not expose your appliance to humidity or water. Furthermore, do not place
your appliance under water (e.g. for cleaning).
1.4. Cleaning
Before cleaning, be sure to switch o the appliance and remove the plug from the
main power supply.
Always allow the unit to cool down before cleaning.
Any deposits, starch residue or stains le on the plate can be removed using a damp
cloth or a non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metal objects.
The plasc parts can be cleaned with a damp cloth then wiped over with a dry cloth.
Self-Cleaning
The self-cleaning feature cleans inside the plate, removing impuries. We recommend
using it every 10-15 days.
Direcons:
> Fill the reservoir up to the maximum level indicated and set the steam
regulator (3) to “0”.
> Set the temperature dial (8) to the maximum temperature and wait for the
light (9) to turn o.
> Pull the plug out of the socket and hold the iron horizontally over the sink.
> Hold the cleanout buon (7) unl all the boiling water, steam and impuries
come out [Fig. 7].
> When the soleplate has cooled down, you can clean it with a damp cloth.
1.5. General Precautions
Please follow the instrucons in the user manual which help to properly install
and operate this product and enjoy its advanced features. Please keep the
instrucons for future reference.
Read all instrucons before using the product.
Maintenance and service operaons are only to be carried out by authorized
professionals.
Any damage caused by manual modicaons to the product is not covered by the
warranty.
If this product is used for other purposes than the ones originally intended, or if it
is not correctly connected, the product may become damaged and the warranty
will be voided.
6
Use the iron only for its intended use.
To protect against a risk of electric shock, do not immerse the iron in water or
other liquids.
The iron should always be turned to O before plugging or unplugging from the
outlet.
Let the iron cool completely before storing. Loop the cord loosely around the iron
when storing.
Always disconnect the iron from the power outlet when lling with water or
emptying and when not in use.
Do not use the iron with a damaged cord or if the iron has been dropped or
damaged. To avoid the risk of electric shock, do not disassemble the iron; take it
to the Costumer Support Service for examinaon and repair. Incorrect reassembly
can cause a risk of electric shock when the iron is used.
Close supervision is necessary for any appliance being used by or near children.
Do not leave the iron unaended while connected or on an ironing board.
Burns can occur from touching hot metal parts, hot water, or steam. Be careful
when you turn a steam iron upside down – there may be hot water in the tank.
If the malfuncon indicator lights, the iron is not operang normally. Disconnect
from the power supply and have the iron serviced by the Costumer Support
Service.
The iron must not be le unaended while it is connected to the power supply.
The plug must be removed from the power outlet before the water tank is lled
with water (for steam irons and irons with water spraying devices).
The ller cap must not be opened during use. Instrucons for the safe relling of
the water tank are given (for pressurized steam irons).
The iron must only be used with the stand provided (for cordless irons).
The iron is not intended for regular use (for travelling irons).
The iron must be used and rested on a stable surface.
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking.
Keep the iron and its cord out of the reach of children less than 8 years old when
it is powered on or cooling down.
To avoid a circuit overload, do not operate another high waage appliance on the
same circuit.
If an extension cord is absolutely necessary, a 10-ampere cord should be used.
Cords rated for less amperage may overheat. Care should be taken to arrange the
cord so that it cannot be pulled or tripped over.
Do not let children or untrained persons use the appliance without supervision.
Never immerse the iron, cable or plug in any liquid.
Do not leave the hot iron on fabrics or highly inammable surfaces.
Do not leave the appliance unnecessarily plugged in. Disconnect the plug from
the mains when the appliance is not being used.


Product specificaties

Merk: Becken
Categorie: Strijkijzer
Model: Efficient Power Care BSI-1604

Heb je hulp nodig?

Als je hulp nodig hebt met Becken Efficient Power Care BSI-1604 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Strijkijzer Becken

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer