BDI Stance 6657 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor BDI Stance 6657 (3 pagina's) in de categorie Bureau. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
Designed by BDI Studio
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Stance & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in Turkey. 06.20.2019
Modesty Panel x 1
Brackets x 2
bdiusa.com
customerservice@bdiusa.com
STANCE® 6657
MODESTY PANEL
Tool Required:
Phillips screwdriver
Hardware List:
Product Registration
Registering your new BDI product allows us to send you important product
updates, service information and helpful hints related to your BDI products.
Register today, and you will be entered to win free a BINK table from BDI:
www.bdiusa.com/register
Placement and Maintenance
Stance® Lift Desk is designed for indoor use on level floors. Clean wood
veneer with a damp cloth.
Your Stance Office furniture is engineered for easy assembly. Carefully ®
follow this procedure to prevent any damage. Do not use power tools
for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace should
be a non-marring surface such as carpet. For missing hardware pieces,
please contact BDI Customer Service at customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
H1 Wood Screw x 8
H2 M6 x 12 Screw x 2
bdiusa.com
customerservice@bdiusa.com
STANCE 6657
MODESTY PANEL
2
Step 1 Install the brackets -
Attach the to the modesty panel as shown with the provided going into the 2 metal brackets 8 wood screws
8 pilot holes located towards the top, inside edge of the panel. Tighten with a Phillips screwdriver.
DO NOT use a power drill.
DO NOT over tighten the screws, otherwise they will strip.
Phillips screwdriver
H1 Wood Screw x 8
bdiusa.com
customerservice@bdiusa.com
STANCE 6657
MODESTY PANEL
3
1) Insert screws half way
2) Slide bracket notch
backwards and onto
screw heads
3) Tighten screws with
hex wrench provided
Step 2 Install the modesty panel -
Find the on either side of the metal tray. Thread the into the 2 threaded holes screws H2 half way threaded
holes. Hook the modesty panel onto the screw heads, slide backward and then tighten the 2 screws with the
hex wrench provided.
Bracket notch
Metal Tray
H2
Product specificaties
| Merk: | BDI |
| Categorie: | Bureau |
| Model: | Stance 6657 |
Heb je hulp nodig?
Als je hulp nodig hebt met BDI Stance 6657 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bureau BDI
6 Januari 2024
6 Januari 2024
6 Januari 2024
6 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
4 Januari 2024
Handleiding Bureau
- Bureau IKEA
- Bureau Ahrend
- Bureau Digitus
- Bureau Fellowes
- Bureau Flexa
- Bureau Foppapedretti
- Bureau Insignia
- Bureau Livarno
- Bureau Manhattan
- Bureau Newstar
- Bureau Sharkoon
- Bureau United Office
- Bureau Victor
- Bureau Jysk
- Bureau Sandberg
- Bureau Genesis
- Bureau Leen Bakker
- Bureau Parisot
- Bureau Tvilum
- Bureau Bush
- Bureau Paidi
- Bureau Bell'O
- Bureau MADE
- Bureau Cooler Master
- Bureau Thermaltake
- Bureau Cougar
- Bureau Techly
- Bureau OKA
- Bureau Vtwonen
- Bureau Seville Classics
- Bureau LC-Power
- Bureau Piranha
- Bureau Bretford
- Bureau Chief
- Bureau Projecta
- Bureau Hooker
- Bureau Alpha Gamer
- Bureau Gamdias
- Bureau Anthro
- Bureau Four Hands
- Bureau Durable
- Bureau Gami
- Bureau HJH Office
- Bureau ThunderX3
- Bureau Bestar
- Bureau Zomo
- Bureau Huzaro
- Bureau Ultradesk
- Bureau HON
- Bureau Lazy Maisons
- Bureau Worktrainer
- Bureau Zaor
- Bureau Glorious
- Bureau Game Shark
- Bureau Yaasa
- Bureau CoolerMaster
- Bureau FOURZE
Nieuwste handleidingen voor Bureau
25 April 2024
25 April 2024
16 April 2024
16 April 2024
16 April 2024
9 April 2024
28 Maart 2024
26 Maart 2024
25 Maart 2024
25 Maart 2024