Baxi Solo 3 PFL 70 Handleiding

Baxi CV Ketel Solo 3 PFL 70

Lees hieronder de 📖 handleiding in het Nederlandse voor Baxi Solo 3 PFL 70 (8 pagina's) in de categorie CV Ketel. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Š Baxi Heating UK Ltd 2009
Baxi Solo 3 PFL Range
Wall Mounted Powered Flue
Gas Fired Central Heating Units
User’s Operating Instructions
Please keep these instructions in a safe place.
If you move house, please hand them over to the next occupier.
2Š Baxi Heating UK Ltd 2009
Natural Gas
Baxi Solo 3 PFL 30
G.C.No. 41 075 20
Baxi Solo 3 PFL 40
G.C.No 41 075 21
Baxi Solo 3 PFL 50
G.C.No. 41 075 22
Baxi Solo 3 PFL 60
G.C.No 41 075 23
Baxi Solo 3 PFL 70
G.C.No. 41 075 24
Baxi Solo 3 PFL 80
G.C.No. 41 075 30
The boiler meets requirements of Statutory Instrument “The Boiler
(Efficiency) Regulations 1993 No3083” and is deemed to meet the
requirements of Directive 92/42/EEC on the efficiency requirements for
new hot water boilers fired with liquid or gaseous fuels:-
Type test for purpose of Regulation 5 certified by:
Notified Body 0086.
Product/Production certified by:
Notified Body 0086.
For GB / IE only.
IMPORTANT - Installation, Commissioning, Service & Repair
This appliance must be installed in accordance with the
manufacturer’s instructions and the regulations in force. Read the
instructions fully before installing or using the appliance.
In GB, this must be carried out by a competent person as stated
in the Gas Safety (Installation & Use) Regulations.
Definition of competence: A person who works for a Gas Safe
registered company and holding current certificates in the
relevant ACS modules, is deemed competent.
In IE, this must be carried out by a competent person as stated in
I.S. 813 “Domestic Gas Installations”.
Lifting - This product should be lifted and handled by two
people. Stooping should be avoided and protective
equipment worn where necessary. Carrying & lifting
equipment should be used as required, e.g. when installing in
a loft space.
Codes of Practice, most recent version should be used
In GB the following Codes of Practice apply:
Standard Scope
BS 6891 Gas Installation.
BS 5546 Installation of hot water supplies for
domestic purposes.
BS 5449 Part 1 Forced circulation hot water systems.
BS 6798 Installation of gas fired hot water boilers.
BS 5440 Part 1 Flues.
BS 5440 Part 2 Ventilation.
BS 7593 Treatment of water in domestic hot water
central heating systems.
BS 4814 Expansion vessels for hot water systems.
BS 6283 Safety and control devices for use in hot
water systems.
In IE the following Codes of Practice apply:
Standard Scope
I.S. 813 Domestic Gas Installations.
The following BS standards give valuable additional information;
BS 5546 Installation of hot water supplies for
domestic purposes.
BS 5449 Part 1 Forced circulation hot water systems.
BS 7593 Treatment of water in domestic hot water
central heating systems.
IMPORTANT - The addition of anything that may interfere
with the normal operation of the appliance without express
written permission from the manufacturer or his agent
could invalidate the appliance warranty. In GB this could
also infringe the GAS SAFETY (Installation and Use)
REGULATIONS.
Š Baxi Heating UK Ltd 2009 All rights reserved. No part of this publication may be
reproduced or transmitted in any form or by any means, or stored in any retrieval system of
any nature (including in any database), in each case whether electronic, mechanical, recording
or otherwise, without the prior written permission of the copyright owner, except for
permitted fair dealing under Copyrights, Designs and Patents Act 1988.
Applications for the copyright owner’s permission to reproduce or make other use of any
part of this publication should be made, giving details of the proposed use, to the following
address:
The Company Secretary, Baxi Heating UK Ltd, The Wyvern Business Park,
Stanier Way, Derby, DE21 6BF.
Full acknowledgement of author and source must be given.
WARNING: Any person who does any unauthorised act in relation to a copyright work may
be liable to criminal prosecution and civil claims for damages.
The Benchmark Scheme
Baxi Heating UK Ltd is a licensed member of the Benchmark Scheme which aims to improve
the standards of installation and commissioning of domestic heating and hot water systems in
the UK and to encourage regular servicing to optimise safety, efficiency and performance.
Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For
more information visit www.centralheating.co.uk
0086
ISO 9001
FM 00866
All Gas Safe registered engineers carry an ID card with their
licence number and a photograph. You can check your engineer
is registered by telephoning 0800 408 5500 or online at
www.GasSafeRegistered.co.uk
1.0 Warnings
13
Š Baxi Heating UK Ltd 2009
1.1 Safe Installation
The appliance is suitable only for installation in GB and
IE and should be installed in accordance with the rules in
force.
In GB, the installation must be carried out by a Gas
Safe Registered Installer. It must be carried out in
accordance with the relevant requirements of the:
• Gas Safety (Installation & Use) Regulations.
• The appropriate Building Regulations either The
Building Regulations, The Building Regulations
(Scotland), Building Regulations (Northern Ireland).
• The Water Fittings Regulations or Water Byelaws in
Scotland.
• The Current I.E.E. Wiring Regulations.
Where no specific instructions are given, reference
should be made to the relevant British Standard Code
of Practice.
In IE, the installation must be carried out by a
competent Person and installed in accordance with the
current edition of I.S. 813 ‘Domestic Gas Installations’,
the current Building Regulations and reference should
be made to the current ETCI rules for electrical
installation.
Read the instructions before installing or using this
appliance.
WARNING: Sealed components must not be
interfered with.
Never hang clothes or other items over the
appliance.
1.2 In case of gas leaks
1. If a gas leak is found or suspected, turn off the gas
supply at the meter immediately and call your gas
supplier.
1.3 Servicing your boiler
1. We strongly recommend that your Boiler is serviced
annually by a competent person for economic and safety
reasons. Your Installer will be able to advise you.
1.4 Electricity supply
1. THIS APPLIANCE MUST BE EARTHED
A standard 230 volt ~ 50Hz supply is required. The
appliance must be protected by a 5 amp fuse.
WARNING: If it is either known or suspected that a fault exists on the
appliance, it must not be used until the fault has been corrected by a
competent person.
Benchmark Commissioning Checklist
Please ensure that the installer has fully completed the Benchmark Checklist on the
inside back pages of the installation instructions supplied with the product and that
you have signed it to say that you have received a full and clear explanation of its
operation. The installer is legally required to complete a commissioning checklist as a
means of complying with the appropriate Building Regulations (England and Wales).
All installations must be notified to Local Area Building Control either directly or
through a Competent Persons Scheme. A Building Regulations Compliance Certificate
will then be issued to the customer who should, on receipt, write the Notification
Number on the Benchmark Checklist.
This product should be serviced regularly to optimise its safety, efficiency and
performance. The service engineer should complete the relevant Service Record on
the Benchmark Checklist after each service.
The Benchmark Checklist may be required in the event of any warranty work and as
supporting documentation relating to home improvements in the optional documents
section of the Home Information Pack.


Product specificaties

Merk: Baxi
Categorie: CV Ketel
Model: Solo 3 PFL 70

Heb je hulp nodig?

Als je hulp nodig hebt met Baxi Solo 3 PFL 70 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding CV Ketel Baxi

Handleiding CV Ketel

Nieuwste handleidingen voor CV Ketel