Bauknecht TK AO 83 N Handleiding

Bekijk gratis de handleiding van Bauknecht TK AO 83 N (10 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over Bauknecht TK AO 83 N of wil je andere gebruikers van dit product iets vragen? Stel een vraag

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance,

pleaseregister your product on

www.register10.eu

Policies, standard documentation, ordering of spare parts and additional product information can be found by:

• Using QR codein your appliance

• Visiting our websitedocs.bauknecht.eu and parts-selfservice.europeanappliances.com

• Alternatively,contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales

Service, please state the codes provided on your product's identication plate.

You can nd more information about your model online at https://eprel.ec.europa.eu/ which is the ocial EU EPREL product database.

After selecting the Product Category, enter the Model Identier of the product. The Model Identier is made up of letters and numbers

and can be found on the identication plate, as Mod. (see image on the right).

EN

Before using the appliance carefully

read the Safety Instruction.

PLEASE SCAN THE QR CODE ON YOUR APPLIANCE IN ORDER TO REACH MORE INFORMATION.

Quick guide

Before using the appliance carefully

read the Safety Instruction.

DAILY USE

Doing this will keep your machine working at its BEST:

- remember to empty your water tank after each drying

cycle.

- remember to clean your lters after each drying cycle.

Refer to the Care & Maintenance section.

1. Plug the dryer into the power supply socket.

2. Open the door and load garments; always refer to instructions on

clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door lter. Do not load items that

are dripping wet. Do not tumble dry large, very bulky items. For

optimal drying result, garments should be loaded one by one.

3. Close the door.

4. Press the "On/O" button.

5. Select the most suitable programme

for the type of fabric in

that load.

6. Select the options, if necessary.

7. Press the "

Start/Pause"

button to begin drying.

8. At the end of the drying cycle, a buzzer will beep. An indicator on

the control panel signals the end of the cycle. Turn the machine

o by pressing the "On/O" button, open the door and pull the

clothing immediately out to prevent the formation of creases on

laundry.

If the machine is not switched o manually, after about a quarter

of an hour from the end of the cycle , the appliance turns o

automatically to save energy.

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the  rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

Note that some programme/option accords with "Crease Care" system.

This means that for some hours, after the end of the drying cycle, the

drum rotates at regular intervals to prevent the formation of creases.

Note that some models perform a nal cool tumble phase, for this

reason the fabrics may not feel hot.

In case of power failure, it is necessary to press the "Start/Pause" button

to restart the cycle.

Opening the door during the cycle

The tumble dryer door can be opened at any time during the cycle

to check progress and remove any garments already dry.

However, since opening the door can extend the drying time, the

recommendation is to keep the door closed throughout the cycle

process to save time and energy.

After closing the door, press the "Start/Pause" button within 15

minutes to resume the machine operation.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dryer is xed correctly,

either to the dryer’s water tank, or to your domestic drainage

system.

The dryer must be installed in a room with a temperature

ranging between 5°C and 35°C to ensure proper operation.

Before using the dryer make sure it has been in an upright

position for at least 6 hours.

Should you wish to change the opening side of the door,

please contact our After-sales Service.(See phone number in

the warranty booklet).

CONTROL PANEL

1 ON/OFF Button (hold for Reset)

2 Programme Selection Knob

3 Start/Pause Button

Options Buttons*

4

Active Care

5 Dryness Level

6 Start Delay

7 Timed Drying

8 Cycle End

9 Gentle (hold for Key lock)

10 Crease Care (hold for Mute)

*Note: some models may have the wording in full instead of the icons.

INDICATORS

Dryness Level: Iron Dry - Hanger Dry - Cupboard Dry - Extra Dry

Cycle Phase:

Drying - Cool Down - END End of Cycle

Empty water tank- Clean door lter - Clean bottom lter

Refer to troubleshooting section:

Failure: Call after sales service

3 “

“

3 “

“

END

END

1

3

2

4

10

8

9

567

D

D

E

E

M

M

O

O

h

h

h

Lorem ipsum

Product specificaties