Bauknecht GTE 255 A++ Handleiding

Bekijk gratis de handleiding van Bauknecht GTE 255 A++ (4 pagina’s), behorend tot de categorie Vriezer. Deze gids werd als nuttig beoordeeld door 85 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Bauknecht GTE 255 A++ of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1. Lid handle.

2. Lock (if provided).

3. Seal.

4. Defrost water drain plug (depending on model).

5. Control panel.

6. Basket (depending on model).

7. Condenser (located at the rear).

INSTALLATION

•Refer to chapter “Before using the appliance”.

•Unpack the appliance.

•Remove the 4 protection pieces inserted between

lid and appliance.

•Warning: two of the four protection pieces must

be fitted in the seat of the condenser plastic

supports, located at the rear of the product.

This is necessary to ensure the correct distance from the

wall.

•Ensure that the defrosting water drainage plug

(if provided) is correctly positioned (4).

•For best operation of the appliance and in order to avoid

damage when the lid is opened, leave a space of at least

7 cm from the rear wall and 7 cm at the sides.

•Fit the accessories (if provided).

1. Red LED: when flashing, it indicates that an alarm

condition is present (see "TROUBLESHOOTING

GUIDE"

2. Yellow LED: indicates that the fast freeze function is

active.

3. Green LEDS: they indicate that the appliance is in

operation, and the temperature has been set.

4. Temperature setting button: to adjust the set

temperature and to activate/deactivate the fast freezing

operations.

Switching on the appliance

•Plug in the appliance.

•The green LED lights up ("Min").

•The red LED (if present) flashes to indicate that the

temperature inside the appliance is not yet sufficiently

low for food storage. The red LED will normally switch

off within the first six hours after the appliance is

switched on.

•Place food inside the product only when the red LED

has switched off.

Note:

Thanks to the efficient lid seal, the appliance lid will not re-

open easily immediately after closing. Wait a few minutes

before re-opening the lid of the appliance.

Temperature adjustment

Use the key (4) to select the desired temperature.

To adjust the internal temperature, proceed as follows:

•Repeatedly press the key (4). Each time the key is

pressed, the set temperature is updated, displaying the

"Min", "Optimum" and "Max" values in succession.

•Select "Max" for a colder storage temperature.

•With partial loads "Optimum" is recommended: this

setting will optimize energy consumption.

Note:

The settings will be saved in the memory even if a power

cut occurs. The time needed for the temperature inside

the freezer to reach the set value, can vary depending on

climatic conditions and the set temperature itself.

Climatic ClassAmb. T. (°C)Amb. T. (°F)

SNFrom 10 to 32From 50 to 90

NFrom 16 to 32From 61 to 90

STFrom 16 to 38From 61 to 100

TFrom 16 to 43From 61 to 110

INSTRUCTIONS FOR USE

GB

Product specificaties