Bauknecht BK41C11BS7LA0 Handleiding
Bauknecht
Vaatwasser
BK41C11BS7LA0
Bekijk gratis de handleiding van Bauknecht BK41C11BS7LA0 (8 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.0 sterren uit 2 reviews. Heb je een vraag over Bauknecht BK41C11BS7LA0 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8
1
ENQuick Guide
1. ON-OFF/Reset button with indicator light
2. Program selection button
3. Salt rell indicator light
4. Rinse Aid rell indicator light
5. Program number and delay time indicator
6. Tablet indicator light
PLEASE SCAN THE
QR CODE ON YOUR
APPLIANCE IN
ORDER TO HAVE
MORE DETAILED
INFORMATION
Before using the appliance carefully read Safety and Installation Instructions.
After installation, please remember to remove all transport protection parts from
the dishwasher.
Program
Programs description
Drying
phase
ActiveDry
Available
options
*)
Duration
of wash
program
(h:min)
**)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
1.
Eco 50°- Program is suitable to clean normally soiled tableware, that for
this use, it is the most ecient programme in terms of its combined en-
ergy and water consumption, and that it is used to assess compliance
with the EU Ecodesign legislation.
3:35 8.7 0.63
2.
Intensive 65° - Program recommended for heavily soiled crockery, es-
pecially suitable for pans and saucepans.
2:45 17.5 1.60
3.
Sensor 50-60°- For normally soiled dishes with dried food residues.
Senses the level of soiling on the dishes and adjusts the program ac-
cordingly.
1:20 - 3:00 7.0 - 14.0 0.70 - 1.10
4.
Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that en-
sures optimal cleaning and drying performance in shorter time.
1.25 11.5 1.10
5.
Half Load 55° - Ideal for washing a half load of lightly or normally soiled
crockery.
1:20 11.0 1.00
6.
Rapid 30’ - 45° Program to be used for half load of lightly-soiled dishes
with no dried food residues. Without drying.
-
0:30 9.0 0.50
7.
Silent 50° - Suitable for night-time operation of the appliance. With the
lowest noise.
3:30 16.0 1.15
8.
Sanitizing - 65° Normally or heavily soiled crockery, with additional
antibacterial wash. Can be used to perform maintenance of the dish-
washer.
-
1.50 12.0 1.30
9.
Prewash - Use to refresh crockery planned to be washed later.
No detergent to be used with this program.
- -
0:10 4.5 0.01
1 2 3 4 5 6 7 8 9 10 11
7. Display
8. Multizone indicator light
9. Multizone
button
10. Delay button
11. START/Pause button with
indicator light / Tablet (Tab)
CONTROL PANEL
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Only the rst time you do this: ll the salt reservoir
with water.
3. Position the funnel and ll the salt reservoir (see gure)
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning eciency.
This system regenerates itself with salt, therefore it is required to rell
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per Eco cycles with water hardness level set to . 6 3
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the appli-
ance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device . Introduce the C
detergent into the dry dispenser only. Place the amount of detergent for D
pre-washing directly inside the tub. If all-in-one detergents are used, we
recommend using the TABLET button, because it adjusts the program so
that the best washing and drying results are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
FIRST TIME USE
More information in the Daily Reference Guide on website.
PROGRAMS TABLE
THANK YOU FOR BUYING A BAUKNECHT PRODUCT.
In order to receive a more complete assistance, please
register your appliance on: www.bauknecht.eu/register
2
Quick Guide
EN
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on
comparative EN testing conditions, please send an email to the following address:
dw_test_support@europeanappliances.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.
DELAY - The start time of the program may be delayed for a period of
time between and hours.1 12
The DELAY function cannot be set once a wash cycle has been started.
MULTIZONE - If there are not many dishes to be washed, a half load-
ing may be used in order to save water, electricity and detergent.
By default the appliance washes dishes in all racks.
TABLET (Tab)- If you use powder or liquid detergent, this option
should be o.
OPTIONS AND FUNCTIONS
Please scan on your product in order to have more detailed information.the QR code
ActiveDry is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying per-
formance every day. Door opens at the temperature that is safe to your
kitchen furniture.
CUTLERY RACK
(loading
example for the
cutlery rack)
The third rack was designed
to house the cutlery.
UPPER RACK
(loading
example for the
upper rack)
Load delicate and light dishes: glasses, cups, saucers, low
salad bowls.
The upper rack has tip-up supports which can be used in a
vertical position when arranging tea/ dessert saucers or in
a lower position to load bowls and food containers.
FOLDABLE FLAPS
WITH ADJUSTABLE
POSITION
LOWER RACK
(loading
example for the
lower rack)
For pots, lids, plates, salad bowls, cutlery etc. Large plates
and lids should ideally be placed at the sides to avoid
interferences with the spray arm.
The lower rack has tip-up supports which can be used in a
vertical position when arranging plates or in a horizontal
position (lower) to load pans and salad bowls easily.
LOADING THE RACKS
CAPACITY: 11 standard place-settings
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
A
A
B
C
1 2 3
4
In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)
please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
To remove the upper spray arm,
turn the plastic locking ring in
aclockwise direction.
The lower spray arm may
be removed by pulling it
upwards.
CARE AND MAINTENANCE
More information in the Daily Reference Guide on website.
OPERATION INDICATOR -
A LED light projected on the oor indicates
that the dishwasher is working.
One of the following operating modes can be selected:
a) Disabled function.
b) When the cycle starts the light goes on for few seconds, stays o during
the cycle and ashes at the end of the cycle.
c) The light stays on during the cycle and ashes at the end of the cycle
(default mode).
CUTLERY BASKET
The basket is equipped with top grilles for improved cutlery
arrangement. The cutlery basket should be positioned only
at the front of the lower rack.
Knives and other utensils with sharp edges must be
placed in the cutlery basket with the points facing
downwards or they must be positioned horizontally
in the tip-up compartments on the upper rack.
3
ENQuick Guide
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specic Regulation requirements.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does not
ll the water. Display shows:
and , both On/O and F6
START/Pause LEDs are blink-
ing rapidly.
No water in the water supply or the tap is closed.
Make sure there is water in the water supply or the tap running.
The inlet hose is bent.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the
dishwasher and reboot.
The sieve in the water inlet hose is clogged; it is
necessary to clean it.
After having carried out the verication and cleaning, turn o and
turn on the dishwasher and restart a new program.
Dishwasher nishes the cycle
prematurely.
Display shows: and both F15
On/O and START/Pause LEDs
are blinking rapidly.
Drain hose positioned too low or siphoning
into home sewage system.
Check if end of drain hose is placed at correct height (see INSTAL-
LATION).Check for siphoning into home sewage system, install air
admittance valve if necessary.
Air in water supply. Check water supply for leaks or other issues letting air inside.
Detergent leaks.
Depends on the liquid detergent used and can be
emphasized in case of Delay option is activated.
Small leaks will not cause machine malfunction and can be avoided
by changing liquid detergent type or using tablets.
TROUBLESHOOTING
Please scan the on your product in order to have more detailed information.QR code
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website anddocs.bauknecht.eu parts-selfservice.europeanappliances.com
• Alternatively, (See phone number in the warranty booklet). contact our After-sales Service
When contacting our After-sales Service, please state the codes provided on your product’s identication plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
Product specificaties
| Merk: | Bauknecht |
| Categorie: | Vaatwasser |
| Model: | BK41C11BS7LA0 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bauknecht BK41C11BS7LA0 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vaatwasser Bauknecht
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
4 Juli 2025
3 Mei 2025
3 Mei 2025
31 Maart 2025
21 Maart 2025
21 Maart 2025
Handleiding Vaatwasser
- AYA
- Proline
- Eurolux
- Robinhood
- Fulgor Milano
- KitchenAid
- M-System
- BEKO
- Nordmende
- Mabe
- RCA
- De Dietrich
- Brandt
- Essentiel B
- Ariston Thermo
Nieuwste handleidingen voor Vaatwasser
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
4 Juli 2025