Barox PC-INJ-60W-B Handleiding

Barox Netwerkkaart/adapter PC-INJ-60W-B

Lees hieronder de 📖 handleiding in het Nederlandse voor Barox PC-INJ-60W-B (7 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

User Manual -INJ- -B Voltage Boosted Series: PC 30

Version 1.2019

Page /2 7

NOTE

Always make sure the total length of the TX cable DOES NOT exceed 100meter. Total length

is defined as length A + length B

Length A + Length B < 100 meters

POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100

meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more

reliable the network will be. When connecting to a poor-quality PD, it cannot generate strong a

enough signal for the remote switch. Always make sure you have a high-quality PD to perform

your desired network.

Introduction

This rugged designed industrial PoE injector is equipped with a 30W PSE Port. The Injector

can be powered by -56 VDC input voltage. With its multi-purpose design, it can also be Din-24

Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance, traffic

monitoring and security applications in critical environments. It can tolerate -40°C to 75°C in

harsh environments to perform a reliable network. This product has been rigorously tested in

harsh environments for your security, transportation, and telco applications.

Remote Switch

Page /3 7

Installation package

This unit can be din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted brackets

are included.

Power connection

This unit provides a 4 pin terminal block. It can be operated using -56VDC power source. 24

Always make sure your input voltage is within this supported voltage range.

To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,

+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a

neutral wire to the ground screw.

+V1- is for power input one connection.

+V2- is for power input two connection.

Power connecting procedure:

STEP 1 – Take out 4 pin terminal block located in the

included mounting kit package.

STEP 2 – Connect power wires to +V1- or +V2- with

corresponding polarity. Connect the grounding wire to

the ground screw.

STEP 3 – Plug into terminal block socket shown

above. Polarity needs to match V+ and V-.

WARNING Always SHUT OFF power source to --

connect power wire.

WARNING Any exceeded input voltage will not make this unit function and may --

damage this unit.

Wall mount

bracket x 2

4 pin Terminal Block x1

Philips Head Screw x 4

Din Rail Bracket x 1

+V1- +V2-

Product specificaties

Merk:	Barox
Categorie:	Netwerkkaart/adapter
Model:	PC-INJ-60W-B
Kleur van het product:	Zwart
Breedte:	32 mm
Diepte:	82 mm
Hoogte:	104 mm
LED-indicatoren:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	FCC, IP30
Duurzaamheidscertificaten:	CE
Voldoet aan industriestandaarden:	EN55022/24\nEN50155\nEN50121-3-2\nEN50121-4\nEN55011\nEN60950-1\nEN50155 / EN60068-2-6\nEN50155 / EN60068-2-27\nEN50155 / EN600-2-32
Ingangsspanning:	24 - 56 V
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Uitgangsvermogen:	60 W
Temperatuur bij opslag:	-40 - 85 °C
Stroomspanning bescherming:	Overbelasting
Luchtvochtigheid bij opslag:	5 - 95 procent
Rack-montage:	Nee
Naleving van duurzaamheid:	Ja
Elektromagnetische compatibiliteit:	CE, FCC, VCCI
Veiligheid:	UL 60950-1, IEC EN60950-1
Ethernet interface type:	Gigabit Ethernet
Power over Ethernet (PoE):	Ja
RJ-45 uitgang ports:	1
RJ-45 invoer ports:	1
Stroomverbruik (typisch):	2 W
Bedrijfstemperatuur (T-T):	-40 - 75 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal producten inbegrepen:	1 stuk(s)
Ondersteundende kabel types:	Cat5e, Cat6, Cat7
Stroom via Ethernet (PoE):	- V
Pintoewijzing & polariteit:	Mode A: Pin 1 (V-), 2 (V-), 3 (V+), 6 (V+), Mode B: Pin 4 (V+), 5 (V+), 7 (V-), 8 (V-)