Barco R9832768 Handleiding

Bekijk gratis de handleiding van Barco R9832768 (1 pagina’s), behorend tot de categorie Projector accessoire. Deze gids werd als nuttig beoordeeld door 62 mensen en kreeg gemiddeld 4.0 sterren uit 9 reviews. Heb je een vraag over Barco R9832768 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

OPTION LENS

H LENS 2.2-2.7

Lens Mounting Manual

•Lens mounting must be performed by service personnel.

•

Be sure to turn off the projector and unplug the power cord from the wall outlet before mounting the option lens.

Lens mounting procedure

Mount the option lens using the following procedure.

1.Remove the lens cover.

ENGLISH

Screen size and projection distance

XGA model

Screen size (4:3)Projection distance (L)Lens shift heightLens shift width

(W1)

Diagonal sizeWidth (W)Height (H)Shortest (Wide)Longest (Tele)H1H2

inch cm inch cminch cm inchminchminch cminch cminchcm

4010232 81 24 61--882.212 302638

60 152 48 122 3691 1052.71353.4184639512

80 203 64 163 48 1221423.61824.62461411616

100254 80 203 60 1521804.62285.83076614820

150 381 120 30590229 2736.93458.8451148211230

200 508 160 406 120 305 3669.346211.76015211281641

250 635 200 508 150 381 45911.757914.77519114362051

300 762 240 610 180 457 55314.069617.79022917432461

WXGA model

Screen size (16:10)Projection distance (L)Lens shift heightLens shift width

(W1)

Diagonal sizeWidth (W)Height (H)Shortest (Wide)Longest (Tele)H1H2

inch cm inch cminch cm inchminchminch cminch cminchcm

40 102 34862154--952.4102551239

60 152 51 129 3281 1132.91453.715 37717513

80 203 68 172 42 1081533.91965.0 19 49923717

100254 85 215 53 1351934.92466.224 62 11 29922

150381127323792022947.53719.436 92 17 431333

200 508 170 431 106 269 39410.049712.64912323581744

250 635 212 538 132 337 49412.562315.86115428722155

300 762 254 646 159 404 59415.174819.07318534862665

WUXGA model

Screen size (16:10)Projection distance (L)Lens shift heightLens shift width

(W1)

Diagonal sizeWidth (W)Height (H)Shortest (Wide)Longest (Tele)H1H2

inch cm inch cminch cm inchminchminch cminch cminchcm

4010234 86 21 54--892.310 2641038

60 152 51 129 3281 1072.71373.51539615512

80 203 68 172 42 1081463.71854.72152820717

100254 85 215 53 1351844.72335.926661025821

150 381 127 32379202 2797.13539.0399815371231

200 508 170 431 106 269 3749.547312.05213120501642

250 635 212 538 132 337 47011.959215.06516424622052

300 762 254 646 159 404 56514.471218.17719729752562

•The above numbers are approximate and may be slightly different from the actual measurements.

•When the lens is set to wide to the full, the screen corners are shaded depending on the lens shift position.

•

The lens shift height and width show distances from the factory default position.

L

L

W1W1

H1 H2H

W

Maximum projection area

Center of the lens

Specifications

F No.F2.1-2.4

Focal distancef = 32.4-40.5 mm

Zoom/focusElectrical drive

•

2.

Mount the option lens to the standard lens turning it clockwise. 3.

Fit the wire and eyelet of the option lens to the projector using the attached screw.

(This prevents the option lens from dropping.)

Protect your eyes and face from the swinging wire when mounting the option lens.

Cautions after mounting

•Do not transport the projector with the option lens mounted. The projector may be damaged.

•

With the option lens mounted, the brightness, resolution, and color uniformity in the projected image may differ from those with

the standard lens.

•With the option lens mounted, the adjustable angle in the keystone adjustment differs from that with the standard lens.

•In the keystone adjustment with the option lens mounted, the proper aspect ratio may not be obtained.

•

Projected images may become distorted, have decreased resolution, or have shadows at their corners if they are positioned close

to the top (or bottom in the case of a ceiling-mount projector) or right or left edge of the effective projection area shown on the right.

•For details about ZOOM/FOCUS adjustment and LENS SHIFT LOCK, see User Manual of the projector.

Be careful not to caught in the opening in the lens while the lens is moving.

(Remove the lens caps before attaching the option lens.)

Screw M3 x 8

Wire and eyelet

Option lens

Option lens

Lens cover

Lens cap

13/12/2013 Printed in Hyogo Japan

Product specificaties