Barco FS33 Handleiding

Barco Beamer FS33

Lees hieronder de 📖 handleiding in het Nederlandse voor Barco FS33 (8 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
addendum
This addendum contains a decription of the special features
which are different from a standard type projector. Please refer
to the main user guide of the product for important information
about safety precautions and the set-up and use of the projec-
tor. Make sure to read both the standard user guide and this
addendum carefully before you operate the projector.
Dieser Anhang enthält eine Beschreibung der besonderen
Merkmale, die sich von denen eines normalen Projektors
unterscheiden. FĂźr wichtige Informationen in Bezug auf die
Sicherheitsvorkehrungen und den Aufbau und die Benutzung
des Projektors schauen Sie bitte in die Gebrauchsanweisung
fĂźr das Produkt. Lesen Sie bitte die Gebrauchsanweisung und
diesen Anhang aufmerksam durch, bevor Sie den Projektor in
Benutzung nehmen.
Le prĂŠsent addenda prĂŠsente les caractĂŠristiques particu-
lières qui diffèrent de celles d’un projecteur de série. Pour les
consignes de sĂŠcuritĂŠ importantes et les indications concernant
la configuration et le maniement de l’appareil, reportez-vous
au guide d’utilisation principal. Lisez soigneusement le guide
standard ainsi que cet addenda avant de mette le projecteur
en service.
Esta adenda contiene una descripciĂłn de las funciones
especiales que se diferencian de las de un proyector de tipo
estĂĄndar. Por favor, remitirse a la guĂ­a del usuario principal del
producto, para informaciĂłn importante sobre las precauciones
de seguridad y la conguración y el uso del proyector. Procurar
leer detenidamente tanto la guĂ­a del usuario estĂĄndar como
esta adenda antes de poner en marcha el proyector.
Il presente allegato illustra le caratteristiche speciali differenti
rispetto a un proiettore standard. Fare riferimento alla Guida
dell’utente principale del prodotto per informazioni importanti
sulle precauzioni di sicurezza, la configurazione e l’uso del proi-
ettore. Leggere attentamente sia la Guida dell’utente standard
che questo allegato prima di utilizzare il proiettore.
Dette addendumet inneholder en beskrivelse av de egenskap-
ene som avviker fra en standard projektor. Sjekk med produktes
komplette brukerveiledning for viktig informasjon om sikkerhets-
tiltak, oppsett og bruk av projektoren. Les bĂĽde den komplette
brukerveiledningen og addendumet nøye før projektoren tas i
bruk.
IR PROJECTORS
www.barco.com
FS33 IR
INTRODUCTION
When referring to the term FS33 in this document,it means that the content is applicable for
following Barco products:
• FS33 IR WUXGA
• FS33 IR WQXGA
The FS33 IR is a state of the art NVG (Night Vision Goggle) stimulation LED projector which
include a fourth LED light chip that emits infrared light beyond the range visible to the human
eye. The product is capable of visualizing night-time and limited-visibility scenario simulation
as well as visible day-time or pitch black scenarios from the common display engine in order
to have a true-to-life simulation. The FS33 IR is single channel input and handles the content
through one of the input connectors (HDMI/DVI/VGA). The infrared wavelength is optimized
for the performance of the optics in the projector and the night vision goggles present in the
market today. The projector’s solid-state light source provides a completely constant light
output over time, eliminating the need for recalibration, reducing maintenance and total cost
of ownership to a minimum.
FEATURES
• NVG stimulation by a fourth Infrared LED
• 1920x1080 and 1920x1200 resolution
• Dimmable to extreme low lumens output of the visible RGB display
• Project visible display for daytime images
• Project infrared display only, no visible image to the unaided human eye
• Simultaneous project visible and infrared for limited visibility scenario
• Smear reduction sequence
• Infrared power adjustments
MENUS
BrilliantColorTM sequences:
There are 5 sequences to choose in the REALCOLOR menu. These displays differently when
it comes to sequence modes for color points versus lumens output.
• Vizsim
• Graphics
• HighBrightness
• Darktime 6ms (smear reduction)
• Darktime 8ms (smear reduction)
IR menu:
A separate IR menu which works with each BrilliantColor
TM sequence listed above,
controls the infrared and visual RGB performance.
IR LED enable: Turns infrared LED on/off.


Product specificaties

Merk: Barco
Categorie: Beamer
Model: FS33

Heb je hulp nodig?

Als je hulp nodig hebt met Barco FS33 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer Barco

Handleiding Beamer

Nieuwste handleidingen voor Beamer