Barco CTPN-41B Handleiding

Bekijk gratis de handleiding van Barco CTPN-41B (2 pagina’s), behorend tot de categorie Beamer. Deze gids werd als nuttig beoordeeld door 110 mensen en kreeg gemiddeld 4.6 sterren uit 7 reviews. Heb je een vraag over Barco CTPN-41B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

adjust projector settings

1getting started

This Quick Start Guide has been designed to help you quickly getting started using your new projector. If you require further help, or have questions on the details of

how to operate this unit, please refer to our web site in order to download the complete product documentation. You can also access FAQ’s and download detailed

white papers in order to get to know the more specific product features and benefits.

Packaging contents:

5adjust image and system settings

connect sources, connect power, power on

3

Change and adjust settings such as brightness and contrast, ceiling mount and rear projection display, as well as color calibration, and other system settings by using

the remote control or through the menu system that is accessible from the on-board keypad.

Make sure the projector is switched off, and not connected to power when connecting to sources. Connect video and computer sources, then insert the power

cable. Power up sources, including computers and other playback devices. Power up the projector by pressing the power key (). A steady, blue indicator light will

indicate it is in operation.

CAUTION! Connecting sources to a powered projector may result in product failure. It is recommended that the power cable connector (projector-end) or the mains

power socket are accessible whilst the product is in use to enable mains power to be disconnected or switched off when connecting source devices. This should be

considered during product installation. In order to prevent damage to the projector caused by over-voltages (e.g. lightning), connect to a line (mains) circuit which has

overvoltage protection when installing.

projector unitAB CD: Focus : Iris : Zoom Manually adjust until optimal picture quality: Lens shift (operated from keypad or remote)

E: Adjustable front feet/rear foot

D

remote controlpower cableproduct documentation

2mount projection lens, get to know the connector panel

Carefully mount the projection lens. Remove protection end caps on lens and bayonet mount, then insert, and turn clockwise until it stops and a click sounds. The

connector panel at the back features a wide range of connectors for all sorts of source connections. Decide which one(s) that meet(s) your requirement(s).

C

B

A

Power on/off

4Manually adjust zoom (C) to set the correct image size, shift (D) to position correctly (motorized), focus (A) for clarity and iris (B) for adjusting contrast and focus depth.

Adjust image level with the 2 feet in the front (E) and the 1 at the rear.

6power off and allow to cool down

To power off, press the power () key once, and confirm by pressing again. Allow to cool down until all fans have stopped (a minimum of 30 seconds), and a

steady yellow indicator light shows that the projector has been safely turned off (status/color table below). Disconnect any cables, sources and power cables before

uninstalling the projector.

STATUS COLOR

On (active)Blue

Wait onBlue flashing

Standby (off)Yellow

WaitYellow flashing

Lamp failureRed

OverheatingRed flashing

Configure/

upgrade

Yellow fast flashing

ErrorRed fast flashing

Power key

Indicator light

Quick Start Guide

1080/WUXGA/WQXGA

601-0345-01

EE

601-0361-00

Features in the quick start pictures/drawings may be different from your projector depending on model/version.

When referring to the term CT series in this document, it means that the content is applicable for the following Barco

products:

• CTHD-61B (1920x1080)

• CTWU-61B (1920x1200)

• CTWQ-61B (2560x1600)

• CTPN-61B (2560x1080)

www.barco.com

Quick Start Guide

CT series

Please visit our web site to download full user manual or find related information

EE

Product specificaties