B-tech BT7819-888 Handleiding
B-tech
Flat panel steun
BT7819-888
Lees hieronder de đ handleiding in het Nederlandse voor B-tech BT7819-888 (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
page 2
BT7819-888
mounting instructions
Slide the collar on the ball-joint bracket . Insert the safety pin into the hole at the corner of the (Diagram A)
collar, make sure that the safety pin is inserted through the ball-joint bracket . Use either the (Diagram B)
finger screws for quick release and easy installation , or the security allen screws, to secure collar (Diagram C)
position on the ball-joint bracket . (Diagram D)
1
Assemble the ball-joint mount before installation on the pole. Drill holes on the Ă50mm
(2â) pole.
*For the poles that are not supplied from
B-Tech.
Slide the collar and ball-joint onto the pole.
2 3
Assemble carousel
disc to ball-joint
bracket, using the
square end allen
screw with spring
washer . (Diagram I)
Once securely
attached, fasten
brake screw
into ball-joint arm
(Diagram J). (This
will stop carousel disc
from unnecessarily
rotating once
mount is installed).
5
Assemble carousel disc to
ball joint bracket.
9
Rotate the projector to desired position.
Slide collar and ball-joint up onto the pole . Insert the safety bolt through the(Diagram E)
retaining plate, collar and pole ). Fasten brake screws into the thread holes to(Diagram F
the position of the collar (Diagram G).
Choose the correct legs for the projector:
1. Number of legs chosen depends
on the number of mounting holes on the
projector. (Where possible, use 4 legs).
2. The size of the legs depends on where
the carousel disc is placed. Mount the
carousel disc as close as possible to the
centre of gravity of the projector.
*The centre of the projector is not always the
centre of gravity, as the weight may be unevenly
distributed.
Please see for your reference on the legs mounting.Diagram H
3. Check the projectorâs manual for screw sizes (M3, M4, M5 or M6).
If the projector has recessed holes, or has an uneven mounting surface,
then choose suitable spacers and/ or washers with spring washers to
allow for a level mounting. Do NOT overtighten.
4
Mount the legs on the projector.
3 mounting holes,
2 short legs and 1
long leg.
4 mounting holes,
2 short legs and 2
long leg.
Ă10.5mm
20mm (minimum distance
from the end of the pole to
the center of the hole)
Drill Ă10.5mm hole horizontally straight through
the pole at the distance from the end of the pole to
the center of the hole.
Position the carousel
disc so that the legs
fit into the slots.
Use either the hand
wheels for easy access
to projector light blub
(Diagram K), or the
locking dome nuts
to secure leg position
on carousel disc
(Diagram L). Tighten
the screws, fixing the
legs to the projector.
6
Mount projector to the carousel disc.
page 3
Diagram K Diagram L
The Aviball arm allows the projector to move freely 37Âș in any direction or to rotate 360Âș . To increase (Diagram M) (Diagram N)
stiffness of arm and to lock projector in position, use the spanner to make a small adjustment of the M8 bolt on the ball-joint brac
.(Diagram O)
8
Adjust M8 hexagon bolt
Adjust M8 hexagon bolt on the ball joint bracket to alter
the tension of the ball-joint. Make sure that the stiffness of
ball-joint can hold the projector in place after moving.
7
Attach the cover plates over
the carousel disc.
To complete installation attach the two halves of the
carousel cover plate over the carousel disc.
Diagram M Diagram N Diagram O
Diagram I Diagram J
BT7819-888
mounting instructions
Diagram A Diagram B Diagram C Diagram D
Diagram E Diagram F Diagram G
Diagram H
1
9
2
11 35
12
10
17
18 19
20
22
23
24
21 2625
27
29
4
5
3
34
14
16
33
13
6
32
31
8
36
28
34
15
Product specificaties
| Merk: | B-tech |
| Categorie: | Flat panel steun |
| Model: | BT7819-888 |
| Kleur van het product: | Zwart |
| Montagewijze: | Plafond |
| Maximale gewichtscapaciteit: | 15 kg |
| Draaihoek: | 360 ° |
Heb je hulp nodig?
Als je hulp nodig hebt met B-tech BT7819-888 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Flat panel steun B-tech
7 November 2023
7 November 2023
7 November 2023
7 November 2023
7 November 2023
7 November 2023
7 November 2023
7 November 2023
7 November 2023
7 November 2023
Handleiding Flat panel steun
- Flat panel steun HP
- Flat panel steun Samsung
- Flat panel steun Pioneer
- Flat panel steun Acco
- Flat panel steun Apart
- Flat panel steun Atlantic
- Flat panel steun BenQ
- Flat panel steun Digitus
- Flat panel steun Ematic
- Flat panel steun Ewent
- Flat panel steun Fellowes
- Flat panel steun GPX
- Flat panel steun Hitachi
- Flat panel steun HQ
- Flat panel steun Icy Box
- Flat panel steun Iiyama
- Flat panel steun InFocus
- Flat panel steun Kensington
- Flat panel steun Konig
- Flat panel steun Luxor
- Flat panel steun Manhattan
- Flat panel steun Marantz
- Flat panel steun Nec
- Flat panel steun Newstar
- Flat panel steun Peerless
- Flat panel steun Premier
- Flat panel steun Pyle
- Flat panel steun Reflecta
- Flat panel steun Vogels
- Flat panel steun One For All
- Flat panel steun 3M
- Flat panel steun Monoprice
- Flat panel steun Steren
- Flat panel steun Bell'O
- Flat panel steun Techly
- Flat panel steun SIIG
- Flat panel steun Sven
- Flat panel steun Tripp Lite
- Flat panel steun Sanus
- Flat panel steun Vision
- Flat panel steun Kondator
- Flat panel steun Barkan
- Flat panel steun Bretford
- Flat panel steun Chief
- Flat panel steun Planar
- Flat panel steun Cabstone
- Flat panel steun Da-Lite
- Flat panel steun Valueline
- Flat panel steun BakkerElkhuizen
- Flat panel steun Wentronic
- Flat panel steun SMS Smart Media Solutions
- Flat panel steun AMX
- Flat panel steun Ergotron
- Flat panel steun Equip
- Flat panel steun Konig & Meyer
- Flat panel steun Atdec
- Flat panel steun StarTech.com
- Flat panel steun Anthro
- Flat panel steun Crimson
- Flat panel steun Panduit
- Flat panel steun Premier Mounts
- Flat panel steun Elite Screens
- Flat panel steun V7
- Flat panel steun SmartMetals
- Flat panel steun Unicol
- Flat panel steun Zaor
- Flat panel steun Dataflex
- Flat panel steun Mount-It!
- Flat panel steun Amer
Nieuwste handleidingen voor Flat panel steun
26 April 2024
26 April 2024
26 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
17 April 2024
17 April 2024
16 April 2024