B-Air Vent VP-20 Handleiding

B-Air Airco Vent VP-20

Lees hieronder de 📖 handleiding in het Nederlandse voor B-Air Vent VP-20 (16 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
HP
OPERATION
SAFETY
SERVICE
WARRANTY
CONTACT
SPECIFICATIONS
TROUBLESHOOTING
Instruction Manual
READ AND SAVE
THESE INSTRUCTIONS
VP-20
AIR MOVER HIGH VELOCITY FAN
IDEAL FOR
DRYING KITCHEN & BATHROOM FLOORS
DRYING WET SURFACES
DRYING HARD-TO-REACH CRAWL SPACES
HOME PLUMBING PROJECTS
CIRCULATING AIR
COOLING WORK SPACES
STACKABLE
5 UNITS
POWERFUL 10 FOOT
CORD
LIGHT &
COMPACT
3 SPEEDS
3 ANGLES
LOW
AMPS
DAISY
CHAINABLE
SAFETY
CERTIFIED
YEAR
WARRANTY
Introduction
The evolution of the centrifugal air mover continues. With maximum amperage
of 2.1 amps on its highest setting combined with its small size, the Vent VP-20
takes concept of drying surfaces and succeeds in making a true drying partner
for the homeowner. The rotomolded housing is durable, washable and
light enough to carry to any corner of the house (10.8 lbs).
The multipurpose design allows operating positions for horizontal, 45° and
90° angles.
The balanced handle also acts as an optimum cord wrap assembly
freeing the VP-20 of obstructions for secure stacking (5 units).
90° Angle 45° Angle Horizontal
BALANCED CARRYING HANDLE WITH CORD WRAP
PRIVATE LABEL AREA (OPTIONAL)
INTAKE GRILL
3 SPEED POWER SWITCH
2 ADDITIONAL DAISY CHAINABLE OUTLETS
EXHAUST OUTLET
SAFETY
CERTIFIED
YEAR
WARRANTY
GROUND
PLUG
ROTO
MOLDED
IMPACT
RESISTANT
DAISY
CHAINABLE
OPERATIONAL
POSITIONS
0º 45º 90º
B-AIR.COM
Operating Instructions
The B-Air Vent VP-20 Centrifugal Air Mover is packaged and ready to be
put to work. The VP-20 requires no assembly.
The VP-20 is intended to be used for drying carpet spills, drying surfaces such
as bathroom, garage or room oors, ventilating as well as circulating air, and
drying hard-to-reach areas such as under a leaky sink or inside damp cabinets.
Just place the unit on the surface that needs to be dried, plug the unit into a
grounded outlet and select the desired speed and position (, 45º or 90º].
Maintenance
WARNING: As with all electrical equipment, the unit must be disconnected
from power before servicing or cleaning.
Before each use, inspect the unit for damage, blocked inlets and exhaust
and for foreign material buildup.
When the Vent VP-20 is turned on, inspect the unit for excessive vibration.
In the event of excessive vibration or if the fan wheel rubs against the
rotomolded housing, immediately turn off the unit and have a certied
technician inspect the unit.
Servicing
In order to receive service or replacement parts under warranty, you must:
a. Call for an RMA (Return Merchandise Authorization Number) at B-Air.
b. Have proof of purchase.
Upon inspection, we will advise you of the repairs needed and the cost (if
Applicable). B-Air will issue repair or replacement parts depending on warranty.
Limited Warranty
Warranty covers against defects in material and craftsmanship used under
normal intended use to original purchaser for a term of (2) two year from the
original date of purchase including parts, labor and 1-way shipping. Housing
is covered for a term of (5) ve years from the date of the original purchase.
IMPORTANT!
Warranty does not cover signs of misuse including, but not limited to rough
handling, abuse, tampering, improper voltage use and unauthorized
maintenance and repairs.
B-AIR.COM


Product specificaties

Merk: B-Air
Categorie: Airco
Model: Vent VP-20

Heb je hulp nodig?

Als je hulp nodig hebt met B-Air Vent VP-20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Airco B-Air

Handleiding Airco

Nieuwste handleidingen voor Airco