Axton A500 Handleiding


Bekijk gratis de handleiding van Axton A500 (17 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 137 mensen en kreeg gemiddeld 4.6 sterren uit 69 reviews. Heb je een vraag over Axton A500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/17
INSTALLATION & OPERATION MANUAL
EINBAU & BEDIENUNGSANLEITUNG
1-/2-/4-/5-CHANNEL POWER AMPLIFIERS
A100 A200 A400 A500 I I I
– 2 –
1. CONNECTIONS + CONTROLS A100 - PAGE I
1 SIGNAL INPUTS R / L
Low-level stereo RCA signal or high-level speaker signal input terminal for connection to
head-unit.
2 AUTO-TURN-ON MODE
Slide switch to select the auto-turn-on function: REM by remote wire, VOX to switch on
 bymusicsignalorDCbyDCoffsetsignaloftheheadunitsintegratedamplier.
3 INPUT GAIN CONTROL
Input gain potentiometer for the subwoofer output channel, to match the output voltage
 oftheheadunittotheamplier’sinput.
4 SUBSONIC HIGHPASS FREQUENCY CONTROL
Controlpotentiometertoadjustthesubsonichighpasslteringfrequencypointofthe 
subwoofer output channel.
5 BASS BOOST 0dB to + 18dB
Turn clockwise to get up to + 18dB bass boost or counterclockwise for no boost with a
 45Hzcenterfrequencyoftheampliedoutputsignal.
6 LOWPASS FREQUENCY CONTROL
Controlpotentiometertoadjustthelowpasslteringfrequencypointofthesubwoofer 
output channel.
7 BASS LEVEL REMOTE CONTROL INPUT 1/2-CH
 Inputterminaltoconnecttheexternalbasslevelremotetotheamplier.
8 POWER LED
 LEDtoshowtheoperatingstatusoftheamplierbyblue/redillumination.Blueis
 normalworkingstate,redisprotectmodeofamplier.
9 INPUT MODE SELECTION
Switch to select the proper input sensitivity range: RCA signal input = Low. Speaker
signal input = Hi.
10 SPEAKER OUTPUT TERMINAL
 Outputterminaltoconnectthespeakerstotheamplier.
11 “+12 V” POWER INPUT TERMINAL
 Terminaltoconnecttheampliertothepositive+12Vpoleofthecarbattery.
12 “REM” INPUT TERMINAL
 Terminaltoconnecttheampliertotheautomatic(remote)turn-on/turn-offleadofthe
head unit. By using the REM terminal, you need to switch the Auto-turn-On mode
2 to
the “REM” position.
ThankyouforpurchasingthisAXTONamplier!
Tomaximizetheperformanceofthisamplierandyourcompletecaraudiosysteminstall,we
recommendthatyouacquaintyourselfthoroughlywithalltechnicalfeaturesandcontrolling
options of thisAXTONamplier. Please read this manual carefully, before attempting the
installation.
If,afterreadingthismanual,youstillhavequestionsregardingfunctionsortheinstallationof
theamplier,werecommendthatyouconsultyourdealer.
– 4 –
1. CONNECTIONS + CONTROLS A200 - PAGE I
1 SIGNAL INPUTS R / L
Low-level stereo RCA signal or high-level speaker signal input terminal for connection
to head-unit.
2 AUTO-TURN-ON MODE
Slide switch to select the auto-turn-on function: REM by remote wire, VOX to switch on
 bymusicsignalorDCbyDCoffsetsignaloftheheadunitsintegratedamplier.
3 INPUT MODE SELECTION
Switch to select the proper input sensitivity range: RCA signal input = Low. Speaker
signal input = Hi.
4 INPUT GAIN CONTROL
Input gain potentiometer for the subwoofer output channel, to match the output voltage
 oftheheadunittotheamplier’sinput.
5 OPERATION MODE SWITCH
 SlideswitchtoselecttheoperationmodeoftheX-overoftheamplier:Highpass
 [HPF],Lowpass[LPF]orfullsignal
6 X-OVER FREQUENCY CONTROL
 Controlpotentiometertoadjustthehighpassorlowpasslteringfrequencyofthe
 amplier.
7 POWER LED
 LEDtoshowtheoperatingstatusoftheamplierbyblue/redillumination.Blueis
 normalworkingmode,redisprotectmodeofamplier.
8 SPEAKER OUTPUT TERMINAL
 Outputterminaltoconnectthespeakerstotheamplierineitherstereoorbridged
mode.
9 “+12 V” POWER INPUT TERMINAL
 Terminaltoconnecttheampliertothepositive+12Vpoleofthecarbattery.
10 “REM” INPUT TERMINAL
 Terminaltoconnecttheampliertotheautomatic(remote)turn-on/turn-offleadofthe
head unit. By using the REM terminal, you need to switch the Auto-turn-On mode
2
to the “REM” position.
11 “GND” POWER INPUT TERMINAL
 Terminaltoconnecttheampliertothechassisgroundornegativepoleofthecar
battery.


Product specificaties

Merk: Axton
Categorie: Receiver
Model: A500

Heb je hulp nodig?

Als je hulp nodig hebt met Axton A500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Axton

Handleiding Receiver

Nieuwste handleidingen voor Receiver

DAP Audio

DAP Audio HP-900 Handleiding

16 September 2025
Topping

Topping DX5 II Handleiding

16 September 2025
Sirus

Sirus I-Amp 4.500T Handleiding

10 September 2025
DS18

DS18 CANDY-XXL1B Handleiding

8 September 2025
DS18

DS18 SXE-1200.4 Handleiding

8 September 2025
DS18

DS18 NXL-M6 Handleiding

8 September 2025
DS18

DS18 G3600.6D Handleiding

8 September 2025
Fosi Audio

Fosi Audio GR70 Handleiding

2 September 2025