Axkid Mate Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Axkid Mate (2 pagina's) in de categorie Autostoel. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
User guide
Please retain this user guide for future reference and store it under the fabric
Vital information- Read now
Do not use the product on a passenger seat fitted a front airbag unless your vehicle with
manufacture confirms it is safe.
Do not use our product on side facing vehicle seats.
Do not attempt to dismantle, modify or add to any part of the product or change the way your car
seat-belts are made or used. The official approval is no longer valid if modifications are made. No
modifications are allowed to be made on then product.
Do cover the product if you leave your in direct sunlight. Metal and plastic fittings can become car
hot to touch in sunny weather and the cover may become faded.
Do follow this user guide instructions in the order shown and get to know your product before
installing it in your car.
Do keep this user guide safe for future reference.
KNOW YOUR NEW BOOSTER SEAT
1. Armrest
2. Cover
WARNING
. This booster seat is only suitable if the approved vehicles are fitted with 3 point/static with
retractor seat-belts approved to UN/ECE R 16 or other equivalent standards.
. For children 15-36kgs (around 4-12years old) use only
. It must not be used with a two point (lap) belt
. Never leave your child unattended in the car
. The booster must not be used without the cover
. Please use an original cover as the cover contributes the safety of the booster.
. After an accident the seat may become unsafe due to damage that is not be noticeable
immediately. It should therefore be replaced.
.Ensure that all luggage and objects likely to cause injury in the event of an accident are properly
secured.
.Advice that rigid items of the seat shall not become trapped between a moveable seat or a door of
the vehicle.
.Not to use any load bearing contact points other than those described in the instructions and
marked in the child restraint.
Cleaning the cover
The cover is washable. To remove the cover, put elastic strips away from the hook underneath the
booster. Please read the washing label on the cover for the washing instructions.
Do not tumble dry the cover, drip dry only.
To replace the cover, position it on the booster, and put the elastic strips back to the hooks.
Further advice
If you need further help or advice on using or fitting the booster, please contact your local dealer.
Installation
Place the booster in your car and make sure that it is
closely against the backrest of passenger seat
Fasten the seat-belt across your child. The lap section of
the belt should sit as forward as possible over the hips and
pass under the armrests(1) on either side of the
booster ,then buckle up djust the seat-belt to fit your .A
childs body, and remove the slack as much as
possible ,and make sure the seat-belt it not twisted.
Your child now is secured. To release your child
simply undo the seat belt.


Product specificaties

Merk: Axkid
Categorie: Autostoel
Model: Mate

Heb je hulp nodig?

Als je hulp nodig hebt met Axkid Mate stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autostoel Axkid

Handleiding Autostoel

Nieuwste handleidingen voor Autostoel