Axis Q1656-BLE Handleiding

Axis Bewakingscamera Q1656-BLE

Lees hieronder de 📖 handleiding in het Nederlandse voor Axis Q1656-BLE (10 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

AXIS Q1656-LE Box Camera

Repainting Instructions

AXIS Q1656-LE Box Camera

Impact on warranty

This product is approved for repaint by Axis, provided that you follow the instructions in this document and at

axis.com/warranty-implication-when-repainting.

Risks with repainting

There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training

of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include:

ESD Damage - Always handle the product in an ESD safe environment. Even if precautions are taken there is always a risk of ESD

damage. The damage can remain undetected and cause problems during the lifetime of the equipment.

Dust contamination - Opening a camera may expose the lens and sensor to dust or paint. Dust will affect the optical performance.

Lenses need to be disassembled in a dust-free environment, preferably a cleanroom.

Paint overspray - Masking the different components of the equipment is critical. Failure to mask sensitive areas can cause problems

with assembling the equipment. Any areas that are not painted at factory or have a different surface treatment than the rest of the

parts (threads, ground and electrical contact surfaces) must also be masked to ensure function.

AXIS Q1656-LE Box Camera

Repaint the product

Preparations

• If applicable, disassemble the device according to the instructions in this document.

• Clean all parts to be repainted thoroughly to remove grease, dust, or oil.

• To ensure reassembly and functionality of the product, mask any openings (for example for screws, LED indicators,

or microphones) before you paint.

Pretreatment of parts

Depending on the part material and type of paint applied at factory, different pretreatment should be done for the new paint to

adhere as well as possible. Clean the parts properly to remove oil, grease and dust.

For more information on the materials used in the product, see its datasheet at .axis.com

Powder coated parts - Use a primer. Alternatively, remove the original powder coating down to the base material, using ne

sandpaper, and clean the parts before painting.

Anodised and chromated parts - Use a primer.

Uncoated stainless steel - No special pretreatment is needed, but make sure that the surface is clean before painting.

Plastic - Use a primer.

Materials used in this product

• The weathershield is plastic.

• The rest of the product is powder coated.

Disassembly

Disassemble the housing

1. Remove the screws and the top cover from the bottom chassis.

Product specificaties

Merk:	Axis
Categorie:	Bewakingscamera
Model:	Q1656-BLE
Kleur van het product:	Wit
Gewicht:	4100 g
Breedte:	404 mm
Diepte:	159 mm
Hoogte:	182 mm
Soort:	IP-beveiligingscamera
Internationale veiligheidscode (IP):	IP66, IP67
Bluetooth:	Nee
Ondersteund audioformaat:	AAC, ADPCM, G.711, G.726, OPUS, PCM
Vormfactor:	Doos
Video recording:	Ja
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Ja
Montagewijze:	Plafond/muur
Maximum resolutie:	2688 x 1512 Pixels
Totaal aantal megapixels:	4 MP
Videocompressieformaten:	H.264, H.265
Type stroombron:	Power over Ethernet (PoE)
Minimale belichting:	0.05 Lux
Aantal cameras:	1
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
Video bewegings-detectie:	Ja
HTTPS-encryptie:	Ja
Zoomcapaciteit:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Wachtwoordbeveiliging:	Ja
Vermogensverbruik (max):	25.5 W
Omvang optische sensor:	1/1.8 "
Beeldstabilisator:	Ja
Type beeldsensor:	CMOS
Camera sluitertijd:	1/47500 - 1 s
Ingebouwde microfoon:	Ja
Intern geheugen:	2048 MB
Netwerkstandaard:	IEEE 802.3at
Ondersteunde beveiligingsalgoritmen:	802.1x RADIUS
Temperatuur bij opslag:	-40 - 65 °C
Maximaal 30 frames per seconde:	60 fps
Luchtvochtigheid bij opslag:	5 - 95 procent
IP-adresfilter:	Ja
Progressive scan:	Ja
Flash memory:	8194 MB
Ondersteunde talen:	CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POL, POR, RUS
Quality of Service (QoS):	Ja
IK code:	IK10
PTZ control:	Ja
Dag/nacht modus:	Ja
Aantal lenzen:	4
Controle camerapanning:	Ja
Kantelfunctie camera:	Ja
Aantal sensoren:	1
Videostreaming:	Ja
Alarm ingang/uitgang:	Ja
Aantal talen:	12
Bitratecontrole:	Variabele bitsnelheid (VBR)
Aanpassing van de afbeeldingskwaliteit:	Brightness, Contrast, Saturation
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Stroomverbruik (typisch):	11.2 W
Bedrijfstemperatuur (T-T):	-40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 100 procent
Privézone maskeren:	Ja
Type waarschuwingsnotificatie:	E-mail
Actieve ombevoegde demontage alarm:	Ja
PTZ-modi:	Digitale PTZ
Audio detectie:	Ja
Pixelteller:	Ja
Samenvattingsverificatie:	Ja