AXESS LOC-TYH2 Handleiding


Bekijk gratis de handleiding van AXESS LOC-TYH2 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.9 sterren uit 12 reviews. Heb je een vraag over AXESS LOC-TYH2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 9/6/23 INSTAX-LOC
AX-LOC
I N S TA L L A T I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Things to Know 1 .......................................................
Connections
Adding a Subwoofer and Amplifier to Your
Factory system-Keeping Factory Speakers 2 ....
Adding a 4 Channel Amplifier-Entire System
Not Using Radio’s Output 3 .................................
Specifications 4 .........................................................
LOC T-Harnesses have vehicle specific applications.
Please visit for the latest and up to date application information.
AxxessInterfaces.com
TOOLS RECOMMENDED
• Digital Multi-meter
• Test Tones
Things to Know
LOC T-harnesses are installed at the radio and designed for non-amplified vehicles. You can find dash
disassembly instructions from the on Vehicle Fit Guide AxxessInterfaces.com
It is recommended that a polarity tester and tone generator be used before connecting your
aftermarket equipment.
If your vehicle doesn’t have an accessory circuit your will not have an accessory ( ) LOC T-Harness Red
wire in the harness. Refer to the instructions for remote turn on options. Some vehicles AX-LOC
require the addition of load resistors, there are multiple options available. We recommend AX-LR20,
AX-LR39, and AX-LR60.
Proper termination of loose wires is required.
2
ADDING A SUBWOOFER AND AMPLIFIER TO YOUR FACTORY SYSTEM-KEEPING FACTORY SPEAKERS
AX-RM1
Remote Turn On
Connect
to LOC
To Amp
Input
Not Used
To OE Speakers
Connect if Adding Sub
To OE Speakers
Connect
T-Harness Installation Location
Factory Radio Chassis
Located Behind Dash
Factory Radio Chassis
This LOC T-harness Is Designed To Work In Non-amplified Vehicles
AX-LOC2.2-PRO
To AMP Turn On
Remote
Turn On
3
REV. 9/6/23 INSTAX-LOC
ADDING A 4 CHANNEL AMPLIFIER/ENTIRE SYSTEM-NOT USING RADIOS OUTPUT
REAR
R
OUTPUT L FRONT
R
OUTPUT
L
REAR LEVEL
AX-LOC4.4-PRO
AX-RM1
This LOC T-harness Is Designed To Work In Non-amplified Vehicles
Not
Used
To OE Speakers
Connect if Adding Sub
To OE Speakers
Connect
T-Harness Installation Location
Factory Radio Chassis
Located Behind Dash
Factory Radio Chassis
AX-LOC4.4-PRO
Run to Aftermarket Amplifier(s).
Connect to the Aftermarket Amplifier Speaker Outputs.
Connect
to LOC
To AMP Turn On
Remote
Turn On
To Amp
Input


Product specificaties

Merk: AXESS
Categorie: Niet gecategoriseerd
Model: LOC-TYH2

Heb je hulp nodig?

Als je hulp nodig hebt met AXESS LOC-TYH2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden