AXESS AXTC-FOC Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van AXESS AXTC-FOC gratis online of download de PDF. Deze handleiding is 37 keer bekeken. Vraag over dit model? Stel een vraag
AXTC-FOC
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 1/4/24 INSTAXTC-FOC
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip-ties
TABLE OF CONTENTS
Connections2 ............................................................
Programming3 .........................................................
Troubleshooting.....................................................4
Ford SWC (Steering Wheel Control)
and Data Interface 2014-2019
APPLICATIONS
• Designed for amplified and non-amplified models
• Provides accessory power (12-volt 10-amp)
•
Provides wires for multimedia radios (park brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Designed to be compatible with all major radio brands
• Auto detects vehicle type, radio connection, and preset controls
• Ability to dual assign steering wheel control buttons
• Retains memory settings even after battery disconnection or interface
removal (non volatile memory)
• Provides illumination output
• Retains the 3.5mm AUX-IN jack
• USB Micro-B updatable
• Retains factory backup camera
Ford
Escape 2015-2018 (with 8 inch screen) .....................................................
Fiesta 2014-2019 (with 8 inch screen) .......................................................
Focus 2015-2018 (with 8 inch screen) .......................................................
Transit full size van 2014-2019 (with 8 inch screen) ................................
• AXTC-FOC interface • LD-SWCX-FOC harness
• 3.5mm adapter
• LD-FD54SWC amplifier step-down
Visit for more detailed information AxxessInterfaces.com
about the product and up-to-date vehicle specific applications.
Product Info
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
Product specificaties
| Merk: | AXESS |
| Categorie: | Niet gecategoriseerd |
| Model: | AXTC-FOC |
Heb je hulp nodig?
Als je hulp nodig hebt met AXESS AXTC-FOC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden