AXESS AXDIS-HK2 Handleiding

Bekijk gratis de handleiding van AXESS AXDIS-HK2 (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 36 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over AXESS AXDIS-HK2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXDIS-HK2

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 2/23/23 INSTAXDIS-HK2

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Wire cutter • Crimp tool • Solder gun • Tape

• Connectors (example: butt-connectors, bell caps, etc.)

TABLE OF CONTENTS

Connections: Amplified & Non-Amplified ........2-3

Installing the AXDIS-HK2 .......................................4

Programming the AXDIS-HK2 ...............................4

Steering Wheel Control Settings ......................5-8

- L.E.D. Feedback ............................................................5

- SWC Connections .........................................................5

- Changing Radio Type ..................................................6

-

Remapping the steering wheel control buttons

....6-7

-

Dual assignment instructions (long button press)

....

7-8

Troubleshooting .....................................................8

Hyundai Data Interface with SWC2012-2016

APPLICATIONS

• Provides NAV outputs (parking

brake, reverse, speed sense)

• Retains audio controls on the

steering wheel

• Retains BlueLink

• Designed for amplified* and

non-amplified models

•

Retains the factory backup camera

• Retains balance and fade

• Micro-B USB updatable

HYUNDAI

Veloster (without NAV) ............................2016

Veloster ..............................................2012-2015

• AXDIS-HK2 interface

• AXDIS-HK2 harness

• 16-pin harness with stripped leads

• Female 3.5mm connector with stripped leads

* Requires the AXSP-HK (sold separately)

Visit AxxessInterfaces.com for more detailed information about the product and

up-to-date vehicle specific applications.

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights,

are plugged in before reconnecting the battery or

cycling the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Product specificaties