AXESS AX-ADXSVI-AU1 Handleiding

Bekijk gratis de handleiding van AXESS AX-ADXSVI-AU1 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 105 mensen en kreeg gemiddeld 4.3 sterren uit 5 reviews. Heb je een vraag over AXESS AX-ADXSVI-AU1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

METRA. The World’s best kits.™metraonline.com1-800-221-0932

© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION

Installation Instructions for AX-ADXSVI-AU1

REV. 9/26/2014 INSTAX-ADXSVI-AU1

(continued on next page)

AX-ADXSVI-AU1

Audi CAN interface 2006-2013

Caution: Metra recommends disconnecting the negative battery terminal before

beginning any installation. All accessories, switches, and especially air bag indicator

lights must be plugged in before reconnecting the battery or cycling the ignition.

*Note: Refer also to the instructions included with the aftermarket radio.

AUDI

A3* 2006-2013

A4/RS 4/S4 w/ NAV 2005-2008

A4/RS 4/S4 2007-2008

A4/RS 4/S4* 2006

TT 2008-2013

*Note: Only for models with either a

Symphony Plus or NAV radio.

APPLICATIONS

FEATURES

Note: This harness must be used in conjunction with the AX-ADXSVI.

•Providesaccessory(12-volt10-amp)

•RetainsR.A.P.(retainedaccessorypower)

•ProvidesNAVoutputs(parkingbrake,reverse,andspeedsense)

•PrewiredASWC-1harness(ASWC-1soldseparately)

•Retainsbalanceandfade

•Micro“B”USBupdatable

Connections to be made

From the XSVI-AU1 harness to the aftermarket radio

(a) From the 12-pin harness:

•ConnecttheRedwiretotheaccessorywire.

•ConnecttheOrangewiretotheilluminationwire,iftheaftermarketradiohas

noilluminationwire,tapeofftheOrangewire.

•ConnecttheBlue/Whitewiretotheampturnonwire(thiswiremustbe

connectedtohearsoundfromthefactoryamplifier).

Note: There is a Blue wire on the 40-pin harness to connect as well.

Thefollowingwiresareforaftermarketmultimedia/navigationradiosthatprovide

thesewires(ifnotrequired,tapethemoffanddisregardthem):

•ConnecttheLight Greenwiretotheparkingbrakewire(ifapplicable).

•ConnecttheGreen/Purplewiretothereversewire(ifapplicable).

•TheBlue/Pinkwirewillnotbeused,tapeitoffanddisregardit.

Note: This wire will be on the 40-pin harness instead.

(b) From the 40-pin harness:

•ConnecttheBlackandBlack/Whitewirestothegroundwire.

•ConnecttheYellow wiretothebatterywire.

•ConnecttheBluewiretotheampturnonwire(thiswiremustbeconnected

tohearsoundfromthefactoryamplifier).

Thefollowingwireisforanaftermarketmultimedia/navigationradiothat

providesthiswire,ifnotrequired,tapeitoffanddisregardit:

•ConnecttheBlue/Pinkwiretothespeedsensewire(V.S.S.),ifapplicable.

INTERFACE COMPONENTS

•XSVI-AU1harness

TOOLS REQUIRED

•Cuttingtool•Tape•Crimpingtool

•Connectors(i.e.butt-connectors,bellcaps,etc.)

Product specificaties