AVUE HDMI-EC200 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor AVUE HDMI-EC200 (2 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.6 sterren beoordeeld

Pagina 1/2
HDMI EXTENDER OVER CAT5e/6/7
HDMI-EC200
FEATURES
ï‚§ Supported Video Input: 1080p /1080i/720p/576p/576i/480p/480i @ 24/50/60fs
ï‚§ Supported Video Output: 1080p/1080i/720p/576p/576i/480p/480i @ 24/50/60fs
ï‚§ Supported Audio Formats: DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
ï‚§ Use single CAT6/5e cable up to 200 feet between sender and receiver units.
ï‚§ LED status indicator
ï‚§ No loss of quality
ï‚§ Installs in minutes
WHAT’S IN THE BOX
ï‚§ 1x Sender (TX) Unit
ï‚§ 1x Receiver (RX) Unit
ï‚§ 2x 5V Power Adapter
 User’s Manual
DIAGRAMS
CAT: Use single CAT cable to connect Sender and Receiver
Switcher: Reads EDID information of incompatible display to adapt.source
1. Connect power adaptor to TX unit.
2. Connect HDMI output of to HDMI input of display.cable with TX
3. Keep the display on and choose the matching HDMI input port.
4. Press Switcher button on to adapt to display. Status LED will turn green TX
when finished adapting from EDID information .
5. Take HDMI cable out and power off the TX.
Adapted EDID settings will take affect when powered on again.
NOTE: These steps also work for HDMI-DVI cable for DVI display.
HDMI IN: Signal Source Input
HDMI OUT: Receiver to connect the HDTV or other display
DC 5V: -5V DC DC Power Adapter interface
OPERATION & CONNECTION
1. Connect one HDMI cable up to 50 feet between Sender (TX) unit
2. Connect one HDMI cable up to 50 feet between Receiver (RX) unit
3. Use a single CAT6/5e, up to feet, to connect the Sender and Receiver200
4. Connect the power adapter to Sender and Receiver unit.
SPECIFICATIONS
Max. CAT-6 Length Up to 200 feet
HDMI Input 1080p/1080i/720p/576p/576i/480p/480i
Audio Input
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-
AC3/DSD
HDMI Output
1080p/1080i/720p/576p/576i/480p/480i
Audio Output
LPCM7.1/DTS/Dolby-AC3/DSD
Max. Bandwidth
225Mhz
Max. Baud Rate
6.75Gbps
Input Video Signal
0.5 ~ 1.5 Volts p-p
Output DDC Signal
≤49.2feet or15m AWG26 HDMI standard cable
Max. Power
Consumption
600mA
Power Adapter
Input: AC 50/60Hz 100V-240V
Output: DC4V/1A (TX/RX)
Operating Temp.
59° ~ 131° F or -15° ~ 55° C
Dimension L x W x H
82 x 44 x 22mm (TX/RX)
Weight
0.41 lb. or 195g
NOTES
Please use these units as instructed to prolong their usefulness.
1. The units should be placed far from damp, high temperature, dusty, erosive, or
oxidative environment.
2. Avoid heavy shaking, hit, or fall.
3. Use original factory power adapter.
4. It is prohibited from touching the power adapter with wet hands.
5. Hold the adapter head and do no pull the power cord when not using the unit.
6. Unplug the power adapter when the units are not to be used for long periods.
7. Do not open the cover to touch the inside parts. is no serviceable part There .
Before powering on, please check the connecting cables carefully. Make sure that
all interfaces are normally connected. The table below is some common to issues
that may arise:
#
Issue
Cause & Ways to Troubleshoot
1
No Power
1. Check the power adapter head is fully and
correctly inserted into the power socket.
2. Check the power switch is on the ON . status
2
No Picture
1. Make sure that the TV is on and has been
connected with the unit.
2. Check if the signal source is on and well
connected.
3. Check the system connection quality.
4. Check if the line is all good quality.
5. Check the cables quality
3
Obscure Picture
1. Try again to connect the cable.
2. Use good quality HDMI cable.


Product specificaties

Merk: AVUE
Categorie: Kabels voor pc's en randapparatuur
Model: HDMI-EC200

Heb je hulp nodig?

Als je hulp nodig hebt met AVUE HDMI-EC200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden