Avigilon Presence Detector (APD) Sensor Handleiding

Avigilon Bewegingsdetector Presence Detector (APD) Sensor

Lees hieronder de 📖 handleiding in het Nederlandse voor Avigilon Presence Detector (APD) Sensor (6 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

InstallationGuide

Avigilon Presence Detector (APD) Sensor

with Ceiling or Wall Mount Adapters

APD-S1-D and APD-MT-WALL1 (optional)

Table of Contents

Overview 1

Device Attached to the Ceiling Bracket 2

Device Attached to Wall or Corner Bracket 2

LEDIndicators 3

Back of Device 3

Positioning the APD™ Device 4

Installation 8

Required Tools and Materials 8

Device Package Contents 8

Installation Steps 8

Mounting the APD Sensor With the Surface Mount Adapter 8

Installing the Device in the Mounting Adapter 9

Assigning an IP Address 10

Configuring the APD Device 11

Initializing the APD Device and Setting the Range 12

Range-Test Mode 12

Using the Range-Test Mode Step-by-Step 12

Connection Status LED Indicator 14

Removing the APDDevice from the Mounting Adapter 15

Resetting to Factory Default Settings 16

Setting the IP Address Using the ARP/Ping Method 17

Specifications 18

For More Information 20

Limited Warranty and Technical Support 21

Overview

The APD device uses a short-range radar sensor to detect motion in small indoor areas. It is designed to detect

the presence of people and it is capable of detecting fine motion, such as respiration. The device is used to

detect people who enter its range and linger for extended periods of time, and can detect people who are

standing still or sleeping, and then send notifications to ACC™ servers connected to the device. It detects

whether a person is present or not but cannot quantify the number of people in range. It can be used

independently when privacy is desired or linked to a camera view for video verification.

Typically, it is configured to send notifications after it has detected that:

lA person has moved into range and lingered for a specified period of time.

lThere is no longer a person in range after a specified period of time.

lA person is present.

lA person is not present.

The notifications received by the ACCserver can be used to trigger alarms using the Rules functionality in the

ACC software. These alarms can then be monitored in the ACC Client or ACCMobile applications and then

acted upon.

The configurable settings for the device allow you to specify:

lThe range for the device, which must be set so that unwanted motion is not detected, such as people

walking along a hallway on the other side of an enclosed area being monitored.

lThe dwell time for a detected object, which is the amount of time that a person or persons are detected

in range before a notification is sent out.

lThe sensitivity of the sensor to fine motion.

Configuration can be completed using the APD Web User Interface (WebUI) when the device is installed and

connected to the network. After the device is also connected to an ACC server, configuration changes can be

made using either the WebUI or the ACCClient Software. For more information, see the Web Interface User

Guide for the APD device and Avigilon Control Center Client User Guide.

The device requires two minutes to learn the environment that is in range any time that it is powered on, or after

the range is reset. During this time, its status appears as "Initializing".

While the device is learning its environment (that is, detecting and recording the normal fixed objects in range),

no people or moving objects should be present within range of the device.

Overview 1

Product specificaties

Merk:	Avigilon
Categorie:	Bewegingsdetector
Model:	Presence Detector (APD) Sensor
Kleur van het product:	Grijs
Gewicht:	124 g
Breedte:	91 mm
Diepte:	60 mm
Hoogte:	39 mm
Materiaal behuizing:	Kunststof
Plaatsing:	Binnen
Connectiviteitstechnologie:	Bedraad
Montagewijze:	Plafond
Certificering:	FCC, IC, UL, cUL, CE, ROHS, WEEE, RCM
Netwerkstandaard:	IEEE 802.3af
Stroomverbruik (typisch):	3 W
Bedrijfstemperatuur (T-T):	0 - 50 °C
Detectieafstand:	9 m