Avanti DG 2401 C Handleiding

Bekijk gratis de handleiding van Avanti DG 2401 C (40 pagina’s), behorend tot de categorie Fornuis. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.3 sterren uit 5 reviews. Heb je een vraag over Avanti DG 2401 C of wil je andere gebruikers van dit product iets vragen? Stel een vraag

IMPORTANT - PLEASE READ AND FOLLOW

✓Before beginning, please read these instructions completely and carefully.

✓Do not remove permanently affixed labels, warnings, or plates from the product. This

may void the warranty.

✓Please observe all local and national codes and ordinances.

✓Please ensure that this product is properly grounded.

✓The installer should leave these instructions with the consumer who should retain

for local inspector's use and for future reference.

✓The electrical plug should always be accessible

Installation must conform with local codes or in the absence of codes, the National Fuel

Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance with the

National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN CANADA:

Installation must be in accordance with the current CAN/CGA-B149.1 National Gas

Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.

Electrical installation must be in accordance with the current CSA C22.1 Canadian

Electrical Codes Part 1 and/or local codes.

INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform with

the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [for-

merly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part

280)] or, when such standard is not applicable, the Standard for Manufactured Home

Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.

INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with

state or other codes or, in the absence of such codes, with the Standard for Recreational

Park Trailers, ANSI A119.5.

Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual

gas shut-off valve must be installed in the gas supply line ahead of the appliance in the gas

stream for safety and ease of service.

If an external electrical source is utilized, the appliance, when installed, must be electrical-

ly grounded in accordance with local codes or, in the absence of local codes, with the

national Electrical Code, ANSI/NFPA 70.

GAS RANGE

for residential use only

DG 2401 C

•USERS OPERATING INSTRUCTIONS

IMPORTANT - PLEASE READ AND FOLLOW

This range is supplied with a protective film onsteel and aluminium parts.

This film must be removed before installing/using the appliance.

E N G LI SHESP AÑOL

Product specificaties