Avantco BMFW4 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Avantco BMFW4 (4 pagina's) in de categorie Warmhoudplaat. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
08/2019
The unit must be connected to a power point with compable power rang.
1. The unit is equipped with a heang element. Add adequate water inside the tank.
2. Rotang the thermostat knob. Do not use the bain marie unl the pre-heat cycle has elapsed
as you will not achieve opmum product holding capabilies.
3. Place the cooked or heated product into gastronorm food pans and place into
bain marie tank.
4. Cover the pans with correct gastronorm lids to suit.
5. Keep close aenon to the temperature of the food product. If the product is too hot it will
out and if the product is too cold it will deteriorate.
6. Dial thermostat models - adjust the thermostat by rotang the dial to desired temperature.
To maintain appearance and increase the service life, the bain marie should be cleaned
at least daily.
1. Before cleaning or moving, unplug the unit and let it cool completely.
2. Carefully empty the water from the well.
3. Wipe the enre well interior with a clean, damp cloth.
4. To avoid damaging the well nish, do not use abrasive materials, scratching cleansers or
scouring pads to clean water deposits from well.
5. If soap or chemical cleansers are used, be sure they are completely rinsed away with clear
water, immediately aer cleansing. Chemical residue could damage warmer.
6. Every two hours, remove pan and check the water level.
DO NOT IMMERSE BAIN MARIE IN WATER OR OTHER LIQUID.
DO NOT SPRAY WITH WATER OR CLEANING PRODUCT. LIQUID COULD ENTER THE
ELECTRICAL COMPARTMENT AND CAUSE A SHORT CIRCUIT OR ELECTRIC SHOCK.
!


Product specificaties

Merk: Avantco
Categorie: Warmhoudplaat
Model: BMFW4

Heb je hulp nodig?

Als je hulp nodig hebt met Avantco BMFW4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden