Aurora AS800CD Handleiding

Bekijk gratis de handleiding van Aurora AS800CD (2 pagina’s), behorend tot de categorie Papiervernietiger. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.6 sterren uit 5 reviews. Heb je een vraag over Aurora AS800CD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Problem 2 The shredder will not stop working –

The shredder is designed to operate for a couple of seconds after paper has cleared the

machine this is normal and helps clear paper through the cutting heads. –

If the shredder continues to work after a shredding cycle and does not stop then this is

either;

1. The waste bin is full. You should empty the b or compact the shredded paper. in

2. Some paper is blocking the auto sensor, try clearing it by reversing and then returning

the switch to auto or by shredding some more paper.

3. Glue from envelopes or label’s is making the sensor lever stick. You should not shred

gummed envelopes or sticky labels, try cleaning and lubricating the shredder with Aurora

SP1000 Lubrication and sharpening sheets, see above.

Problem 3 The shredder has jammed whilst shredding –

Empty the waste bin and try reversing the unit to clear the jam.

If this does not work disconnect power, trim off paper above and below the jam,

reconnect power and try alternating between reverse and auto until the jam clears.

If at any point the shredder stops working during this process it has probably over heated

and will need to cool down for 60 minutes.

Please be careful not to exceed the maximum paper capacity and feed the paper in

straight, please be aware damage caused to the shredder by inserting too much paper or

by failing to shred using a straight paper path is classed as misuse and invalidates your

warranty.

Never attempt to clear paper jams by inserting implements into the shredder or by

opening the unit.

Warranty

Your Aurora shredder comes with a 12 months return to base warranty, please contact

your supplier for further details.

Aurora warrants all parts of the machine to be free from defects in materials and

workmanship for a period of 1 year from the date of the purchase by the original

consumer. If the shredder is found to be defective during the warranty period the sole

and exclusive remedy will be the repair or replacement at Aurora’s option and expense.

Aurora Electronics (UK) Ltd disclaims any liability for incidental or consequential

damages attributable to the product. The liability of Aurora Electronics (UK) Ltd is limited

to the cost of the repair/replacement of the unit under warranty.

The warranty shall be immediately invalidated if unauthorized repairs or modifications are

made, if the machine has been abused or mishandled, if the product has been re-sold, or

if the product has not been operated in accordance with the instructions contained in this

document.

The warranty is in addition to and does not diminish the consumer’s statutory or legal

rights.

Aurora Electronics (UK) Ltd

Email: sales@aurora-ltd.co.uk

www.aurora-ltd.co.uk

IMPORTANT

Please ensure the shredder head is placed on the bin correctly. The safety cut out will prevent the

shredder from operating if the bin is the wrong way around or is not placed correctly on the waste bin.

Ensure the viewing window of the waste bin faces forward and the shredder head is placed on the bin

as shown in figure 1.

The safety cut out is on the back of the shredder, the semi circular recess on the waste bin must slot

inside the semicircular shape on the back of the shredder head to deactivate the safety cut out.

Please ensure the semicircular recess on the bin is not outside the shredder head or that the shredder

head is not resting on top of the semicircular recess on the bin. When correctly fitted there should be

no gap between the shredder head and the waste bin, and the fitting should be flush all around the

shredder.

Product specificaties