Auray SS-WM19-TLA2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Auray SS-WM19-TLA2 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Wall Mount Speaker Bracket
with Tilt, Length, and Angle Adjustment (Pair)
SS-WM19-TLA2
Owner’s Manual
Owner’s Manual SS-WM19-TLA2
Thank you for choosing Auray.
The heavy-duty Auray SS-WM19-TLA2 wall-mount
brackets feature all-steel construction and are built to hold
PA speakers with 1⅜-inch holes. The rugged wall-mount
design will hold speakers up to 88 pounds and allow
you to adjust the arm length, angle, and tilt for optimum
speaker placement. The arm length adjusts from 12 to 19
inches to accommodate a wide range of speaker depth. An
integrated safety pin and chain provide extra security for
your mounted speakers. Five-point wall brackets attach
to any flat surface and provide flexible speaker placement
options for venues like clubs, theaters, and function halls.
• Please read and follow these
instructions, and keep this
manual in a safe place.
• Handle the unit with care.
• Clean the unit with
only a soft, dry cloth.
• Make sure everything is
secure before proceeding.
• Do not exceed the
maximum load capacity.
• All images are for
illustrative purposes only.
!
!
!
!!
Precautions
Owner’s Manual SS-WM19-TLA2
1. Use the wall plate to mark the position of the mounting
holes on the wall.
2. Drill holes in the marked locations. Make appropriately
sized holes for the wall anchors, molly bolts, or toggle
bolts. If you’re using wall anchors, tap the anchors into
the holes.
Note: Many wall anchors and molly bolts are self-
tapping and don’t require a drill for installation.
3. Put the plate against the
wall, and insert screws
(for wall anchors), molly
bolts, or toggle bolts
through the holes, and
fasten them until they’re
fully tightened, and the
wall bracket is secure.
Note: When screwing
the plate directly into
a wall stud, make sure
at least two screws are
attached to the stud.
Mounting Instructions


Product specificaties

Merk: Auray
Categorie: Niet gecategoriseerd
Model: SS-WM19-TLA2

Heb je hulp nodig?

Als je hulp nodig hebt met Auray SS-WM19-TLA2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Auray

Auray

Auray RF-PBO Handleiding

6 September 2023
Auray

Auray CFC-610 Handleiding

6 September 2023
Auray

Auray COHH-FD1 Handleiding

6 September 2023
Auray

Auray RFDT-128 Handleiding

6 September 2023
Auray

Auray CFP-ET6 Handleiding

6 September 2023
Auray

Auray BP-59A Handleiding

6 September 2023
Auray

Auray RF-5P-B Handleiding

6 September 2023
Auray

Auray PBS-AH Handleiding

6 September 2023
Auray

Auray BP-36A Handleiding

6 September 2023
Auray

Auray LTS-ST Handleiding

6 September 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd