Audix OM7 Handleiding

Audix Microfoon OM7

Lees hieronder de 📖 handleiding in het Nederlandse voor Audix OM7 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

OM7

OVERVIEW:

Designed, assembled and tested by Audix in the USA, the OM7 is a

dynamic vocal microphone used for professional sound companies,

front of house and mixing engineers, and high prole xed installations.

The OM7 is known for its ability to provide unprecedented gain before

feedback on concert level stages without sacricing sound quality. In

addition, the OM7 is very resistant to feedback on extremely loud stages,

and for performers who tend to “cup” the microphone with both hands.

In order to achieve these extraordinary performance benets, the OM7

is designed with an unconventionally low output level (8-10 dB lower

than typical dynamic microphones). This low gain stage acts as a natural

“pad” at the capsule in order to maintain high delity at the source.

For this reason, the OM7 is best suited for use with high quality mixing

consoles with plenty of head room to compensate for the low gain.

The OM7 is characterized with a super-tight hypercardioid polar pattern

which effectively isolates the vocals from the rest of the instruments on

stage. With a wide frequency range of 48 Hz - 19 kHz, the OM7 employs

a VLM™ (Very Low Mass) diaphragm for a very clean and punchy sound

with exceptional transient response.

Well balanced, comfortable to hold and durable, the OM7 is

manufactured with very high standards and tight tolerances. Roadworthy

construction includes a precision die cast zinc alloy body, black e-

coat nish, laser etched model and serial number, steel mesh grill,

Switchcraft® XLR connector, and heavy duty nylon clip.

FEATURES:

Studio quality sound

Low gain stage acts as natural pad

Unprecedented gain before feedback

Handles high SPL without distortion

Low handling noise

Provides exceptional vocal isolation on stage

Dent resistant steel spring grill

5 year warranty

APPLICATIONS:

Lead or backing vocals

Live recording

Broadcast

Home studio - vocal and instrument

Sax, brass, guitar, dobro, flute, percussion, drums

SUPPLIED ACCESSORIES:

Heavy duty nylon mic clip (MC1)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

WS357 - External foam windscreen

CBL20 - 20’ XLR-XLR mic cable

DYNAMIC VOCAL MICROPHONE

MC1 WS357 CBL20

Transducer Type Dynamic

Frequency Response 48 Hz - 19 kHz

Polar Pattern Hypercardioid

Output Impedance 150 ohms

Off Axis Rejection > 30 dB

Maximum SPL ≥144 dB

Power Requirements None

Connector Switchcraft® male

XLR connector

Polarity Positive pressure on diaphragm

produces positive voltage on pin 2

relative to pin 3 of output

XLR connector

Housing / Finish Zinc Alloy /

Black E-coat

Length 176 mm / 6.9 inches

SPECIFICATIONS: ARCHITECTS AND ENGINEERS SPECIFICATIONS:

The microphone shall be of the dynamic type and the polar pattern of the microphone

shall be hypercardioid. The nominal output impedance shall be equal to 150 ohms at

1 kHz.The microphone shall have a sensitivity of 0.8 mV / Pa at 1 kHz and a sound

pressure level ≥144 dB. The microphone body shall be of die cast zinc alloy and the

grill cap shall be steel wire mesh. The overall dimensions shall be 23 mm in diameter

at the base, 53 mm in diameter at the widest point on the grill and 176 mm in length.

The microphone shall be the Audix OM7.

OPERATION:

The OM7 is a low impedance microphone and should be plugged into the “mic level”

input of your console, mixer, or recording device. Please note that your microphone

does not require phantom power and will not be effected in any way by phantom

power should it be running simultaneously while the microphone is in operation. Avoid

plugging or unplugging the microphone from the PA system unless the channel is

muted or the volume of the system turned down. Failure to do so may result in a loud

“popping” noise which could seriously damage the speakers in the PA system.

USER TIPS:

The OM7 is designed with an unconventionally low output level; this means that the

gain will have to be compensated on the mixing console or mic preamp. The OM7 has

the tightest pick-up pattern of any microphone on the market in order to help eliminate

sound from other instruments on stage from “bleeding” into the microphone. For best

results, it is important to sing directly into the mic as close as possible (within 1-inch)!

When using oor monitors, position the microphone so that it is parallel to the oor.

When using multiple microphones on a live performance stage, allow a distance of 2-3

feet between mics to avoid phase issues.

*Further miking techniques may be found on our website at www.audixusa.com

www.audixusa.com Call: 503-682-6933 Fax: 503-682-7114

Audix Corporation 9400 SW Barber Street, Wilsonville, OR 97070

SERVICE AND WARRANTY:

This microphone is under warranty for

a period of 5 years from any and all

manufacturing defects. Should your

microphone fail in any way, please con-

tact the Audix Service department at

503-682-6933. A Return Authorization

number is required before returning

any products.

CARE AND MAINTENANCE:

The OM7 is manufactured to exacting specs

with roadworthy construction. However, the

capsule is highly sensitive and should be

handled with care. Avoid extreme temperatures

and be sure to store your microphone in the

pouch provided when not in use. Moisture of

any kind can adversely affect the sound and

performance of your microphone.

FREQUENCY / POLARS:

To register your

microphone, please visit

www.audixusa.com

***All specications subject to change without notice.

DIMENSIONS (mm):

Product specificaties

Merk:	Audix
Categorie:	Microfoon
Model:	OM7
Kleur van het product:	Zwart
Diepte:	176 mm
Hoogte:	53 mm
Soort:	Microfoon voor podiumpresentaties
Connectiviteitstechnologie:	Bedraad
Ruisonderdrukking:	Ja
Impedantie:	150 Ohm
Aansluiting:	XLR-3
Frequentiebereik:	48 - 19000 Hz
Compatibele producten:	MC1\r\nWS357\r\nCBL20
Frequentie microfoon:	48 - 19000 Hz
XLR out:	Ja
Diepte (imperiaal):	6.9 "
Aantal producten inbegrepen:	1 stuk(s)
Gewicht microfoon:	307 g
Output impedance:	150 Ohm
Afmetingen microfoon (DxH):	176 x 53 mm