Audix D-Clip Handleiding

Bekijk gratis de handleiding van Audix D-Clip (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Audix D-Clip of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DCLIP

OVERVIEW

The DCLIP is a heavy duty, simple to use mic clamp system that attaches

to a mic stand or any number of popular stands with either a 3/8” or 5/8”

threaded surface. Such products include boom stands, tri-pods, Audix DVICE,

Audix DCLAMP, and other drum mic clips. The DCLIP is provided with a

thread adapter that allows it to be used with European 3/8” mic stands.

Optimized to be used with the Audix D Series instrument mics, the DCLIP will

work with any mic barrel with an OD (outer diameter) measurement of

19 mm - 23 mm.

TO OPERATE

The best method to place the mic into the clip is to snap the mic down into place

from the top side of clip (see photo bottom right).

Do not try to slide the mic into the end of the clip as the clip is intended to

expand only from the top. This snap-to-fit design provides a very tight grip on the

barrel microphone holding it firmly in any position.

The metal thumbscrew allows the clip to rotate the position of the mic 180°. The

thumbscrew locks firmly into place without having to over-tighten. To loosen

the thumbscrew, simply turn counter-clockwise. It is not necessary to loosen the

thumbscrew more than 1/4 turn. Note that the screw and bolt will come apart if

loosened more than 2 complete turns.

THE ULTIMATE

INSTRUMENT MIC HOLDER

FEATURES

• Heavy duty nylon material

• Metal thumbscrew locks holder firmly into position

• Works with a wide variety of popular microphones

• Durable brass threads

• 1 year warranty

Optimized for use with the

Audix D series instrument

mics. (Pictured with Audix D2

mic).

Can be used with shotgon

mics (Pictured with the Audix

UEM81S).

Can be used with overhead

pencil condenser mics (Audix

ADX51 pictured).

To operate; Place mic barrel over top of mic

and snap the mic into place. Depending on

the size of the mic barrel, it may take quite

a bit of pressure before the mic snaps into

place. Do not worry, the clip has quite a bit

of play and will not break.

Product specificaties