Audiolab 6000CDTS Handleiding

Audiolab CD-spelers/recorder 6000CDTS

Lees hieronder de 📖 handleiding in het Nederlandse voor Audiolab 6000CDTS (12 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

User Instructions

6000CDT

REPEAT

Page 1

1: Important Safety Information

IMPORTANT SAFETY INFORMATION

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

WARNING: SHOCK HAZARD-DO NOT OPEN

This lightning with arrowhead symbol within an ﬂash

equilateral triangle is in ed to alert the user to the tend

presence of non-insulated “dangerous voltage” within the

product’s enclosure that may be of magnitude to suﬃcient

constitute a risk of electric shock.

Warning: To reduce the risk of electric shock, do not remove

cover (or back) as there are no user-serviceable parts inside.

Refer servicing to qualiﬁed personnel.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance instructions in the literature

accompanying the appliance.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding plug has two blades

and a third grounding prong. The wide blade or the third

prong is provided for your safety. If the provided plug does

not into your outlet, consult an electrician for ﬁt

replacement of the obsolete outlet.

Pr ect the power cord froot m being walked on or pinched

particularly at the plugs, convenience receptacles, and at

the point where they exit from the apparatus.

Use only with the cart, stand, tripod, bracket,

or table by the manufacturer, or speciﬁed

sold with the apparatus. When a cart or rack

is used, use caution when moving the

cart/apparatus combination to avoid injury

from tip-over.

Unplug this apparatus during lightning storms or when

unused for long periods of time.

Refer all servicing to service personnel. Servicing is qualiﬁed

required when the apparatus has been damaged in any

way, such as power supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

CAUTION: These servicing instructions are for use by

qualiﬁed service personnel only. To reduce the risk of

electric shock, do not perform any servicing other than that

contained in the operating instructions unless you are

qualiﬁed to do so.

Do not install this equipment in a or built-in space conﬁned

such as a bookcase or similar unit, and keep well ventilated

in open space. The ventilation should not be impeded by

covering the ventilation openings with items such as

newspaper, table-cloths, curtains etc.

WARNING: Only use attachments/accessories speciﬁed

or provided by the manufacturer (such as the exclusive

supply adapter, battery etc).

WARNING: Please refer to the information on the exterior

panel of the enclosure for electrical and safety information

before installing or operating the apparatus.

WARNING: The battery (battery or batteries or battery pack)

shall not be exposed to excessive heat such as sunshine, ﬁre

or the like.

CAUTION: Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equivalent type.

WARNING: For the terminals marked with symbol of “ ”

may be of suﬃcient magnitude to constitute a risk of electric

shock. The external wiring connected to the terminals

requires installation by an instructed person or the used of

ready-made leads or cords.

Mains Supply: The mains operating voltage of Audiolab

6000 series units is shown on the rear panel. If this voltage

does not match the mains voltage in your area, consult your

Audiolab dealer about converting the unit.

The mains supply fuse on the rear panel is accessible when

the IEC mains plug has been removed. In the rare event that

it has broken, check for any obvious cause before replacing

the fuse with one of the correct rating and type.

The fuse values are:

220 – 240V (UK, China, etc.) T630mAL 250V Slow Blow

100 – 120V (USA, Japan, etc.) T1AL 250V Slow Blow

This label tells you that the unit

contains a laser component.

Opening the unit will expose the

user to radiation from the laser

beam.

Placement

2: Getting Started

Welcome to Audiolab 6000 Series.

We hope you will enjoy its performance for many years to come.

Please read through this manual to obtain the very best performance from 6000CDT.

Inputs:

• CD disc playback.

Outputs:

• Optical and coaxial SPDIF digital output.

Features:

• Automatic equipment activation via 12V trigger output .

• Display on/oﬀ options.

• Auto standby function with function on/oﬀ options.

Unpacking

Unpack the product fully. The carton should contain:

• The Audiolab 6000CDT

• One IEC power cord suitable for your area.

• One Remote handset with two AAA batteries

• This instruction manual.

Page 2

lf an item is missing or damaged , report this to your dealer as soon as possible. Retain the

packing for safe transport of your unit. If you dispose of the packing, do so with regarding

to any recycling regulation in your area.

Note: The 6000CDT should be used with the DIGl or OPT outputs connected directly to a

preampliﬁer with inbuilt DAC.

6000CDT is a high performance CD transport that is the perfect partner for other

Audiolab components such as 6000A.

The unit is designed to run warm during normal operation but ensure you do not block

any ventilation openings.Place the unit on a sturdy shelf or table. If you use an equipment rack,

ensure the unit has adequate ventilation and is on its own shelf. To minimize any interference,

place the power supply in a stable location as far from sensitive analogue input as

possible.Ensure your mains voltage corresponds to the rating plate on the rear of the

product’s power supply. If in doubt, consult your dealer. If you move to an area with a diﬀerent

mains advice from an Audiolab appointed dealer or a competent service voltage,seek

technician.

Product specificaties

Merk:	Audiolab
Categorie:	CD-spelers/recorder
Model:	6000CDTS

Heb je hulp nodig?

Als je hulp nodig hebt met Audiolab 6000CDTS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding CD-spelers/recorder Audiolab

Audiolab 8000CDE Handleiding

11 November 2022

Audiolab 6000CDTS Handleiding

14 Oktober 2022

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder

Hegel Viking Handleiding

10 April 2024

Philips CDR880 Handleiding

9 April 2024

S.M.S.L PL200 Handleiding

26 Maart 2024

Marantz CD60 Handleiding

25 Maart 2024

GPX PCB319 Handleiding

22 Maart 2024

GPX PRC257B Handleiding

20 Maart 2024

Creek 4040 CD Handleiding

19 Maart 2024

Advance MCX 300 Handleiding

19 Maart 2024

Advance MCX 400 Handleiding

19 Maart 2024

Advance EZY 80 Handleiding

19 Maart 2024