Audiolab 6000A Play Handleiding

Audiolab Receiver 6000A Play

Lees hieronder de đź“– handleiding in het Nederlandse voor Audiolab 6000A Play (43 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/43
User Manual
6000A Play
6000A Play
Page 1
1: Important Safety Information
AVIS:
RISQUE
DE
CHDC
ELECTRIQUE-NE
PAS
DUVRIR
VVARNING:
SHOCK
HAZARD-DD
NOT
OPEN
This lightning flash
with
arrowhead symbol within
an
equilateral triangle is intended
to
alert the user
to
the
presence
of
non-insulated "dangerous voltage" within the
product's enclosure that may
be
of
sufficient magnitude to
constitute a risk
of
electric shock.
Warning:
To
reduce the risk
of
electric shock, do not remove
cover (or back)
as
there are no user-serviceable parts inside.
Refer servicing to qualified personnel.
The
exclamation point within
an
equilateral triangle
is
intended to to alert the user the presence
of
important
operating and maintenance instructions in the literature
accompanying the appliance.
IMPORTANT
SAFETY
INSTRUCTION
Read
these instructions.
Keep
these instructions.
Heed
all warnings.
Follow
all
instructions.
Do
not
use
this apparatus near water.
Clean
only with dry cloth.
Do
not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
Do
not install near any heat sources such
as
radiators, heat
registers, stoves,
or
other apparatus (including amplifiers)
that produce heat.
Do
not
defeat
the
safety purpose
of
the
polarized
or
grounding-type plug. A polarized plug
has
two blades with
one wider than the other. A grounding plug
has
two blades
and a third grounding prong.
The
wide blade
or
the third
prong
is
provided
for
your
safety.
If
the provided plug does
not fit into your outlet, consult
an
electrician
for
replace-
ment
of
the obsolete outlet.
Protect the power cord from being walked on
or
pinched
particularly at the plugs, convenience receptacles, and at
the point where they exit from the apparatus.
Unplug this apparatus during lightning storms
or
when
unused
for
long periods
of
time.
Refer all servicing to qualified service personnel. Servicing
is
required when the apparatus
has
been damaged in any
way, such
as
power supply cord
or
plug
is
damaged, liquid
has
been spilled
or
objects have fallen into the apparatus,
the apparatus
has
been exposed to rain
or
moisture, does
not operate normally,
or
has
been dropped.
CAUTION: These servicing instructions are
for
use
by
qualified service personnel only.
To
reduce the risk
of
electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are
qualified to do
so.
Do
not install this equipment in a confined
or
built-in space
such
as
a bookcase
or
similar unit, and keep well ventilated
in open space.
The
ventilation should not
be
impeded by
covering the ventilation openings with items such
as
newspaper, table-cloths, curtains etc.
WARNING: Only
use
attachments/accessories specified
orprovided by the manufacturer (such
as
the exclusive
supply adapter).
WARNING:
Please
refer to the information
on
the exterior
panel
of
the enclosure for electrical and safety information
before installing or operating the apparatus.
WARNING:
To
reduce the risk
offire
or
electric shock, do not
expose this apparatus to rain
or
moisture.
The
apparatus
shall not
be
exposed to dripping or splashing and that
objects filled with liquids, such
as
vases,
shall not
be
placed
on
apparatus.
WARNING:
For
the terminals marked with symbol
of
"f"
the voltage may
be
of
sufficient magnitude to constitute a
risk
of
electric shock.
The
external wiring connected
to
the
terminals requires installation by a qualified person
or
the
use
of
ready-made leads
or
cords.
The
product
is
designed to
use
in moderate/tropical
climates.
Mains Supply:
The
mains operating voltage
of
Audiolab
6000 series units
is
shown on the rear panel.
If
this voltage
does not match the mains voltage in
your
area, consult your
Audiolab dealer about converting the unit.
The
mains supply fuse on the rear panel
is
accessible when
the
IEC
mains plug
has
been removed.
In
the rare event that
it
has
broken, check
for
any obvious cause before replacing
the fuse with one
of
the correct rating and type.
The fuse values are:
220 -
240V
(UK,
China, etc.)
T2AL
250V
Slow Blow
100 - 120V
(USA,
Japan, etc.)
T4AL
250V
Slow Blow
[g]
This
equipment
is
a Class
II
or
double insulated
electrical appliance. It
has
been designed in such a
way that it does not require a safety connection to
electrical earth.


Product specificaties

Merk: Audiolab
Categorie: Receiver
Model: 6000A Play

Heb je hulp nodig?

Als je hulp nodig hebt met Audiolab 6000A Play stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Audiolab

Handleiding Receiver

Nieuwste handleidingen voor Receiver