Audio-Technica ES935C6 Handleiding

Bekijk gratis de handleiding van Audio-Technica ES935C6 (52 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over Audio-Technica ES935C6 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CARDIOID CONDENSER GOOSENECK MICROPHONE

10 dB

20k10k5k2k1k50020010050

8 kHz

200 Hz

1 kHz

5 kHz

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

Optional Accessories:

AT8474 universal isolation mount.

AT8473 quick-mount stand adapter.

AT8506 four-channel 48V phantom

power supply (AC powered).

AT8668 quick-mount plug-in micro-

phone desk stand.

AT8801/EU single-channel 48V

phantom power supply (AC pow-

ered).

Polar Pattern

Frequency Response

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

Frequency in Hertz

LEGEND 12” or more on axis

Roll-off

Response in dB

FORM No. ATGC-L0096-07-E

Machida • Tokyo • Japan

SPECIFICATIONS

ELEMENTFixed-charge back plate

permanently polarized condenser

POLAR PATTERNCardioid

FREQUENCY RESPONSE30-20,000 Hz

LOW-FREQUENCY ROLL-OFF80 Hz, 18 dB/octave

OPEN CIRCUIT SENSITIVITY-40 dB (10.0 mV) re 1V at 1 Pa

IMPEDANCE250 ohms

MAXIMUM INPUT SOUND LEVEL138 dB SPL, 1 kHz at 1% T.H.D.

DYNAMIC RANGE (typical)109 dB, 1 kHz at Max SPL

SIGNAL-TO-NOISE RATIO65 dB, 1 kHz at 1Pa

SWITCHESFlat, roll-off

PHANTOM POWER REQUIREMENTS11-52V DC, 4 mA typical

WEIGHT104 g

DIMENSIONS197.3 mm - long

8.4 mm - head diameter,

18.9 mm - base diameter

OUTPUT CONNECTORIntegral 3-pin XLRM-type

ACCESSORIES FURNISHEDAT8109 two-stage foam windscreen

OPTIONAL INTERCHANGEABLE

ELEMENTS

ESE-O omnidirectional (360°)

ESE-H hypercardioid (100°)

ESE-ML MicroLine® (90°)

ES935C6 is a wide-range miniature

condenser microphone with a cardioid

polar pattern. It is designed for quality

sound reinforcement, professional

recording, elevision and other

demanding sound pickup applications.

The small-diameter gooseneck design

permits highly flexible positioning while

maintaining a smooth, well-contoured

appearance. An included snap-on foam

windscreen effectively reduces wind

noise and “popping.”

The ES935C6 is equipped with

UniGuard®RFI-shielding technology,

which offers outstanding rejection of

radio frequency interference (RFI). The

microphone is RoHS compliant – free

from all substances specied in the EU

directive on hazardous substances.

The microphone's cardioid polar pattern

provides a 120° angle of acceptance.

Additional interchangeable elements with

omnidirectional (360°), hyper-cardioid

(100°) and MicroLine® (90°) pickup

patterns are available.

The integral power module can be powered from any external 11V

to 52V DC phantom power supply. A recessed switch in the power

module permits choice of at response or low-frequency roll-off (via

integral 80 Hz high-pass UniSteep®lter) to help control undesired

ambient noise.

The microphone is enclosed in a rugged housing with a low-

reectance black nish. It features an XLRM-type connector insert at

its base, allowing it to be plugged directly into an XLRF-type panel

jack or microphone cable. An AT8474 low-prole isolation mount or

AT8473 stand clamp is optional to permit attachment of the XLR mic

base to a standard ⅝"-27 or ⅜"-16 threaded mic stand or mounting

ange.

The ES935C6 stands 197.3 mm from the table or podium. The model

output is low impedance balanced. The output connector mates with

XLRF-type cable connectors. The balanced signal appears across

Pins 2 and 3, while the ground (shield) connection is Pin 1. Output is

phased so that positive acoustic pressure produces positive voltage

at Pin 2, in accordance with industry convention.

The integral 80 Hz high-pass UniSteep® filter provides easy

switching from a flat frequency response to a low-end roll-off. The

roll-off position reduces the pickup of low-frequency ambient noise

(such as traffic, airhandling systems, etc.), room reverberation and

mechanically coupled vibrations. To engage the UniSteep®lter, use

the end tip of a paperclip or other small pointed instrument to slide

the switch toward the “bent” line.

Avoid leaving the microphone in the open sun or in areas where

temperatures exceed 43°C for extended periods. Extremely high

humidity should also be avoided.

Product specificaties