Audio-Technica AE5400 Handleiding

Bekijk gratis de handleiding van Audio-Technica AE5400 (2 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 30 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Audio-Technica AE5400 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User Manual

Cardioid Condenser Handheld Microphone AE5400

■Features

■Notes on use

■Connection procedure

This product requires 48 V

DC phantom power.

Outp nsuttermial

PIN1 (ground)

PIN3

(cold)

PIN2 (hot)

■Specifications

Externally polarized (DC Bias) condenser

Cardioid

20 - 20,000 Hz

80 Hz, 12 dB/octave

-40 dB (10.0 mV) re 1V at 1 Pa

150 ohms

147 dB SPL, 1 kHz at 1% T.H.D.

157 dB SPL, with 10 dB pad (normal)

14 dB SPL

133 dB, 1 kHz at Max SPL

80 dB, 1 kHz at 1 Pa

11-52 V DC, 3 mA typical

High-pass filter,

10 dB pad (normal)

Integral 3-pin XLRM-type

•1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

*Typical, A-weighted, using Audio Precision System One.

■Pratternola p

■Fr roeequencyespns

180°

150°

120°

30°

0°

330°

300°

270°

240°

210°

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

©2017 Audio-Technica Corporation

Global Support Contact: www.at-globalsupport.com

11-DEC--2020 Form No.ATGC-L0389-20

LEGEND

0°, 50cm

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

Thank you for purchasing this product. Before using the product, read through the user

manual to ensure that you will use the product correctly.

Please keep this manual for future reference.

Offering exceptional sound quality, the AE5400 uses the same condenser element as the

classic AT4050 studio microphone. This large diaphragm element ensures an accurate,

natural response. With a 80 Hz HPF switch and 10 dB pad, the sound can be perfectly

tailored to suit your voice. With a hardened steel body and grille and multi-stage internal

windshield, the AE5400 is rugged and durable, with exceptionally low handling noise and

protection against plosives and sibilance, making it a fantastic on stage microphone.

Output from the microphone’s XLRM-type connector is low impedance (Lo-Z) balanced. The

signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” –

positive acoustic pressure produces positive voltage at Pin 2.

When using the AE540 in settings with a stage monitor speaker, the speaker should be

located 180° off axis (at rear of the microphone). This placement, in conjunction with the

microphone's uniform cardioid pickup pattern, will virtually eliminate the possibility of

undesired audio feedback.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C

for extended periods. Extremely high humidity should also be avoided.

Connect eas a microphone the output terminals of the microphone to a dvice that h

input (balanced input) compatible with a phantom per supply. The output connector ow

is an XLRM-type with polarity as shown in the figure below.

For product improvement, the product is sublect to modification without notice.

• Same element as the renowned AT4050 studio condenser

• Condenser element gives pristine natural sound quality

• Hardened steel body and grille for rugged durability

• Cardioid polar pattern gives improved sound isolation

• Multi-stage grille for reduced plosives and sibilance

• Integral 80 Hz HPF switch and 10 dB pad

• Ergonomic design for easy handling

■Safety precaution

■Cautions for the product

Although this product was designed to be used safely, failing to use it correctly may result in

an accident. To ensure safety, observe all warnings and cautions while using the product.

• Do not subject the product to strong impact to avoid malfunction.

• Do not disassemble, modify or attempt to repair the product.

• Do not handle the product with wet hands to avoid electric shock or injury.

• Do not store the product under direct sunlight, near heating devices or in a hot, humid or

dusty place.

Element

Polar pattern

Frequency response

Low Frequency response

Open circuit sensitivity

Impedance

Maximum input sound level

Noise

Dynamic range (typical)

Signal-to-noise ratio

Phantom power requirements

Switch

Output connector

Roll-off

330 g

179.0 mm long, 50.0 mm head diameter,

33.0 mm to 22.0 mm tapered body diameter

Weight (less accessories)

Dimensions

Included accessoriesAT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands;

soft protective pouch

60°

90°

Response in dB

Frequency in Hertz

10

0

-10

-20

-30

20

5001005020010k5k1k 2k20k

10 dB

Product specificaties