Audibax LA05T Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Audibax LA05T (3 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
CEILING SPEAKER
CEILING SPEAKER
LA-T series
USER GUIDE
The LA-T range is a series of passive ceiling speakers designed for the 100v line, with a woofer from 4.5
inches to 6.5 inches. The LA-T series is the perfect choice for the distribution of microphone calls and
background music both for restaurants or commercial stores. The mounting frame is made of high
quality ABS. The grille is made of metal. The LA-T is available in white.
• Keep this manual for future reference.
• When cutting the mounting hole for the speaker, make sure there is sufficient clearance behind
the panel (no obstructions like A/C channels, power lines etc).
• Take care of your speaker wires, they should be free of damage. Damaged speaker wires might
result in poor sound quality and can damage amplifiers.
• Only use accessories specified by the manufacturer.
• Make sure the mounting panel can support the speakers weight.
• Use sufficient amount of speakers to avoid dead spots.
• No mains power shall be connected to the loudspeakers, doing so will damage the speaker.
• This apparatus should only be serviced by qualified personnel. If not warranty might be void.
• Use cable of the right gauge, certainly for long runs.
• Use cables with clear color indication and maintain polarity throughout the whole system.
• Avoid loud feedback from microphones, this can damage your speaker.
• Please check the units condition after unpacking. If the outside of the carton box has been
damaged, inform your shipper immediately.
SAFETY PRECAUTION
The loudspeaker is easy to install, due to its simple mounting system.
(1) Use the cutout template to mark the mounting hole.
(2) When making the hole in your mounting panel, double check if
there are no cables or any other obstructions behind the mounting
panel. Cutting the mounting panel without this check might result
in damaged infrastructure or power lines. Please make sure that the
mounting structure is capable of safely supporting the speaker's
weight.
(3) Remove the speaker grille: turn the mounting clamps (dog-ears)
outwards and push them in the direction of the grille until it pops out.
Remove the grille.
(4) Turn the dog-ears inwards again and tighten the dog-ear screws
slightly to make them stay in the inward position.
(5) Connect the speaker wires and insert the speaker in the precut
speaker opening.
(6) Fasten the dog-ear screws carefully until the speaker sits safely in
place. Do not overtighten the dog-ear screws!
(7) Carefully push the grille back in place.
MOUNT THE SPEAKER
The warranty for hidden defects can only be considered if they appear within the 24-month warranty
period. The warranty is not valid in case of misuse, wear, power surges, improper packaging or
shipping, improper use or storage and failure to comply with Audibax recommendations. The product
must be returned in the original packaging with proof of purchase made by an authorized distributor
of Audibax
WARRANTY INFO
1
2
3
4 5 6 7
SPECIFICATIONS LA-T
1 2
Model
Model
Characteris cs îžź
LA05-T
LA06-T
Outside diameter
170mm
222mm
Depth
58mm
75mm
Loudspeaker system
1 way
1 way
Woofer size
4,5”
6,5”
Tweeter size
N/A
N/A
Impedance
8 ohmios
8 ohmios
Power
1,5w/3w/6w
1,5w/3w/6w
SPL
91
91
Frequency
150HZ-20KHZ
150HZ-20KHZ
Material
ABS
ABS
Grille material
Metal
Metal
100W Line
Yes
Yes
ALTAVOZ DE TECHO
ALTAVOZ DE TECHO
Serie LA-T
GUĂŤA DEL USUARIO
La serie LA-T es una serie de altavoces de empotrar pasivos diseñada para línea de 100v, con un woofer
desde 4,5 pulgadas a 6,5 pulgadas. La serie LA-T es la opciĂłn perfecta para la distribuciĂłn de llamadas
de micrófono, música de fondo tanto para restaurantes, locales comerciales. El marco de montaje está
hecho de ABS de alta calidad. La rejilla está hecha de metal. La serie LA-T está disponible en color Blanco.
• Guarda este manual para futuras referencias.
• Al cortar el orificio de montaje para el altavoz, asegúrate de que haya suficiente espacio detrás
del panel (no hay obstrucciones como canales de A / C, lĂ­neas de alimentaciĂłn, etc.).
• Cuida los cables de tu altavoz. Deben estar libres de daños. Los cables dañados de los altavoces
pueden dar como resultado una mala calidad de sonido y dañar los amplificadores.
• Utiliza únicamente los accesorios especificados por el fabricante.
• Asegúrate que el panel de montaje pueda soportar el peso del altavoz.
• Utiliza una cantidad suficiente de altavoces para evitar puntos muertos.
• No se debe conectar alimentación a los altavoces, p2-ya que esto dañará el altavoz.
• Este aparato solo debe ser reparado por personal calificado. Si no la garantía puede ser anulada.
• Utiliza cable del calibre correcto, los indicados para recorridos largos.
• Utiliza cables con una clara indicación de color y mantenga la polaridad en todo el sistema.
• Evita los ruidos de los micrófonos Esto puede dañar tu altavoz.
• Por favor, comprueba el estado de las unidades después de desembalar. Si el exterior de la caja
de cartón p2-ha sido dañado, informa al vendedor de inmediato.
PRECAUCIONES DE SEGURIDAD
El altavoz es fácil de instalar, debido a su sencillo sistema de montaje.
(1) Use la plantilla recortada para marcar el orificio de montaje.
(2) Al hacer el orificio en tu panel de montaje, verifica si no hay cables
u otras obstrucciones detrás del panel de montaje. Cortar el panel de
montaje, sin esta comprobación puede provocar daños en la
infraestructura o en las líneas eléctricas. Asegúrate que la estructura de
montaje sea capaz de soportar de manera segura el peso del altavoz.
(3) Retira la rejilla del altavoz: gira las abrazaderas de montaje hacia
afuera y empĂşjala en la direcciĂłn de la rejilla hasta que salga. Retire
la rejilla.
(4) Vuelve a girar las abrazaderas hacia adentro y aprieta ligeramente
los tornillos de la abrazadera para que queden en la posiciĂłn interior.
(5) Conecta los cables e inserta el altavoz en el orificio cortado
(6) Ajusta los tornillos de las abrazaderas con cuidado hasta que el
altavoz se asiente en su lugar. No se deben apretar demasiado los
tornillos.
(7) Coloca con cuidado la rejilla en su lugar correspondiente.
MONTAJE DEL ALTAVOZ
La garantĂ­a por defectos ocultos solo se puede considerar si estos aparecen dentro del perĂ­odo de
garantía de 24 meses. La garantía no es válida en caso de un mal uso, desgaste, sobrecargas de
energĂ­a, embalaje o envĂ­o inadecuado, uso o almacenamiento incorrectos y el incumplimiento de
las recomendaciones de Audibax. El producto debe devolverse en el embalaje original con el
comprobante de compra realizado por un distribuidor autorizado de Audibax.
INFORMACIĂ“N SOBRE LA GARANTĂŤA DEL PRODUCTO
1
2
3
4 5 6 7
ESPECIFICACIONES DE LA SERIE LA-T
3 4
Modelo
Modelo
CaracterĂ­s cas îžź
LA05-T
LA06-T
Diámetro exterior
170mm
222mm
Profundidad
58mm
75mm
Loudspeaker system
1 vĂ­a
1 vĂ­a
Tamaño woofer
4,5”
6,5”
Tamaño tweeter
N/A
N/A
Impedancia
8 ohmios
8 ohmios
Power
1,5w/3w/6w
1,5w/3w/6w
SPL
91
91
Frecuencia
150HZ-20KHZ
150HZ-20KHZ
Material
ABS
ABS
Material Rejilla
Metal
Metal
100W Line
Si
Si


Product specificaties

Merk: Audibax
Categorie: Speaker
Model: LA05T

Heb je hulp nodig?

Als je hulp nodig hebt met Audibax LA05T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Audibax

Audibax

Audibax Party 12 Handleiding

21 Februari 2024
Audibax

Audibax PR42T Handleiding

21 Februari 2024
Audibax

Audibax LA05T Handleiding

20 Februari 2024
Audibax

Audibax LA06T Handleiding

20 Februari 2024
Audibax

Audibax Beta 1BT Handleiding

20 Februari 2024
Audibax

Audibax CS8T Handleiding

20 Februari 2024
Audibax

Audibax CS5T Handleiding

20 Februari 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker