Audac SSP500 Handleiding
Bekijk gratis de handleiding van Audac SSP500 (5 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 64 mensen en kreeg gemiddeld 4.5 sterren uit 32.5 reviews. Heb je een vraag over Audac SSP500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5

PROFESSIONAL AUDIO EQUIPMENT
2-Way Flush mount Sauna Speaker SSP500
Installation Guide
Sauna
Speake
r
SSP500
AUDAC

1
Installation Procedure
1) Cut a hole in the wall / ceiling on the desired mounting location of the loudspeaker with a diameter of
120 mm.
2) Take the loudspeaker, and remove the front grill.
The front grill is attached to the loudspeakers basket by a simple clicking system, and can be easily
removed by carefully clicking the front grill away from the loudspeaker’s housing.
3) Provide the loudspeaker connection cable through the mounting hole.
4) Connect the loudspeaker to the output terminals of the amplifier.
Note
Notice the polarity markings when connecting the loudspeaker.
5) Place the loudspeaker on the desired mounting location, and put the loudspeaker’s housing through the
cut hole. Fasten the loudspeaker by putting four screws through the provided holes, and tighten them.
Always use the proper fasteners, depending of the mounting surface.
Note
On the bottom side where the connection terminals of the loudspeaker are located, there’s a
gap provided in the loudspeaker housing and front grill. This gap is meant to let the moisture
flow out of the loudspeaker. Always make sure this gap is mounted on the bottom side of the
loudspeaker, when mounted in vertical position.
6) Once the mounting screws are tightened, the front grill can be assembled to the loudspeaker.
This can be done by simply clicking the front grill to the loudspeaker’s housing. Notice the front grill
will only fit in one position, because of the gap to let the moisture flow out on the bottom side.

2
Product specificaties
Merk: | Audac |
Categorie: | Speaker |
Model: | SSP500 |
Kleur van het product: | Wit |
Gewicht: | 620 g |
Breedte: | - mm |
Diepte: | 74 mm |
Hoogte: | - mm |
Materiaal behuizing: | Acrylonitrielbutadieenstyreen (ABS) |
Connectiviteitstechnologie: | Bedraad |
Diameter: | 175 mm |
Gemiddeld vermogen: | 20 W |
Aanbevolen gebruik: | Universeel |
Impedantie: | 8 Ohm |
Audio-uitgangskanalen: | 1.0 kanalen |
Speaker plaatsing: | Ceiling-mountable, Wall-mountable |
Aantal drivers: | 1 |
Woofer: | Ja |
Diameter driver: | 127 mm |
Peak Music Power Output (PMPO): | 40 W |
Frequentiebereik: | 75 - 20 Hz |
Gevoeligheid: | 86 dB |
Luidspreker soort: | 2-weg |
Diameter woofer: | 5 " |
Diameter hogetonenluidspreker: | 1 " |
Tweeter: | Ja |
Bedrijfstemperatuur (T-T): | -25 - 100 °C |
Relatieve vochtigheid in bedrijf (V-V): | 0 - 95 procent |
Heb je hulp nodig?
Als je hulp nodig hebt met Audac SSP500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Audac
5 Juli 2025
11 Juni 2025
11 Juni 2025
9 Juni 2025
4 Juni 2025
13 April 2025
12 April 2025
12 April 2025
12 April 2025
29 Maart 2025
Handleiding Speaker
- XXODD
- DeWalt
- Razer
- Akg
- Watson
- CyberData Systems
- HK Audio
- Atlas
- Hitachi
- Blackmagic Design
- Techly
- Party Light & Sound
- Hyundai
- IKEA
- Conceptronic
Nieuwste handleidingen voor Speaker
10 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025