Audac NELO706 Handleiding

Bekijk gratis de handleiding van Audac NELO706 (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 92 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Audac NELO706 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION MANUAL

NELO706 SERIES SURFACE MOUNT SPEAKERS

STEP 1STEP 2

The NELO706 series speakers are delivered assembled.

For installation, both parts (speaker part and wall

part) needs to be taken apart. This is done through

releasing both screws (top and bottom) of the speaker,

and removing both parts from each other.

The wall part has to be assembled to the provided

location on the wall or ceiling. This is done through

knocking out the provided areas (teardrop holes) for

the fasteners. Choose the fasteners depending on the

mounting surface (concrete, wooden, steel, ...) The

distance between both mounting positions is 130 mm.

Also make sure the connection cables are provided

through the designated openings (grommets) for

connecting the speaker accordingly.

STEP 3

Connect the wires coming from the amplier to the

SnapConnect™ on the rear speaker part.

The correct power tapping is chosen by connecting the

appropriate terminals of the connector. A description

of the power tap selection is shown on the magnet

sticker on the rear side of the loudspeaker.

NELO706:

• White: 833 Ω - 70V/6W

• Red: 1667 Ω - 100V/6W - 70V/3W

• Blue: 3333 Ω - 100V/3W - 70V/1.5W

• Black: COM

STEP 4

Assemble both speaker and wall part again through

joining both parts together. Make sure the speaker

part is in the right direction to make sure it can easily

slide into position. Once in position, insert both screws

again to tighten both parts together.

The speaker is now ready for use.

Product specificaties