Audac CSF506 Handleiding

Audac Speaker CSF506

Lees hieronder de 📖 handleiding in het Nederlandse voor Audac CSF506 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

PROFESSIONAL AUDIO EQUIPMENT

Fire Protected Ceiling Speaker CSF506

Installation Guide

Ceiling

Speake

CSF506

AUDAC

Installation Procedure

1) Cut a hole in the ceiling, on the desired mounting

location of the loudspeaker, with a diameter of 160

mm.

2) Remove the loudspeaker out of the firedome. The

loudspeaker is fixed in the firedome by means of

two mounting springs. It can be removed by

pulling the white front grill away from the

firedome. It will come out easily, without

performing large forces.

3) After the loudspeaker comes out the firedome, it

still will be suspended by the two springs. Release

the two springs by pressing them together. Now

the speaker can be completely removed from the

firedome.

4) Take the firefome, and release the two wing bolts

on the inner side of the firedome.

Slide the two fixing plates upwards. This allows

the firedome to be pushed inside the ceiling

hole. Before you push the firedome through the

mounting hole in the ceiling, make sure that the

speaker connection cable is provided through

the holes in the firedome.

A mounting bolt is provided on top of the

firedome. This allows to connect a steel safety

wire to the firedome. This can be used for

additional security purposes.

5) When the firedome is pushed up inside the fixing

hole , slide the two fixing plates down by means

of the wing bolts. The ceiling will be clamped

between the edge of the firedome, and the fixing

plates. After tightening the two wing bolts, the

firedome will be hold in place.

6) Suspend the loudspeaker on one side of the

firedome. This can be done by pressing the

mounting springs together and attach them to one

of the side brackets on the inner side of the

firedome.

7) Connect the loudspeaker connection cable to the

provided ceramic connection block. Always connect

the common to the COM connection terminal. And

depending of the desired power, the positive

amplifier output can be connected to the 6 Watt, or

3 Watt connection terminal.

8) When the connections are made, connect the second

mounting clip to the speakers firedome.

The loudspeaker will slide nicely into the firedome

by applying only a small force on the speakers grill.

Product specificaties

Merk:	Audac
Categorie:	Speaker
Model:	CSF506
Kleur van het product:	Wit
Gewicht:	1300 g
Breedte:	180 mm
Diepte:	127 mm
Hoogte:	180 mm
Materiaal behuizing:	Staal
Type verpakking:	Doos
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	6 W
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Audio-uitgangskanalen:	1.0 kanalen
Speaker plaatsing:	Plafond-montage
Aantal drivers:	1
Woofer:	Nee
Frequentiebereik:	90 - 18000 Hz
Diameter mid-range driver:	5 "
Tweeter:	Nee
AirPlay:	Nee
Transformatortrappen:	3,6 W
Ingebouwde bijpassende transformator:	Ja