Audac CALI660 Handleiding

Bekijk gratis de handleiding van Audac CALI660 (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 82 mensen en kreeg gemiddeld 4.6 sterren uit 9 reviews. Heb je een vraag over Audac CALI660 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION MANUAL

CALI SERIES SAFE-LATCH™ CEILING SPEAKERS WITH REAR-DOME

STEP 1STEP 2

Cut a hole on the mounting location in the ceiling.

Make sure the diameter is matching the cut-out

measurement for the loudspeaker.

Double check if there are no cables or other

obstructions behind the mounting surface before

making the cut-out.

Remove the cover and connect the cables to the

ceramic connection terminal by inserting the cable in

the corresponding hole and tightening the screw. The

remaining two terminals can be used to link through

to other speakers.

Reattach the cover plate and tighten the cable strain

relief.

Ø Diameter

STEP 3STEP 4

Make sure the spacing between the mouting surface

and the clamp is bigger than the thickness of your

ceiling plate. Insert the speaker until the clamps snap

in place

Fix the speaker in the provided opening by tightening

the screws of the mounting clamps using a screw

driver.

An optional tile bridge must be installed when

mounting the speaker in ceiling tiles.

STEP 5STEP 6

Using a at head screwdriver, the power tap or low

impedance selection can be made.

Attach the grill to the speaker by inserting the lips into

the provided openings on the speaker bae and rotate

it over a partial turn (15°).

The speaker is now correctly installed and ready for

use.

Product specificaties