Atosa ST2472ECR2 Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Atosa ST2472ECR2 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

Work Table with Undershelf
Installation Instruction
STxxxxEC / STxxxxECB4 / STxxxxECR2
Tools Required
Parts Drawings (4 Legs Table & 6 Legs Table)
Allen wrench(included)
ATOSA USA, INC.
Toll Free: 855-855-0399 Email: [email protected]
www.atosa.com | www.atosausa.com
California, Colorado, Florida, Georgia, Illinois,
New Jersey, Ohio, Texas, Washington
1 x Stainless Steel Top1 x Undershelf
4 x Legs (4 Leg Table)18 x Tightening Screws for 4 Leg Table
(2 x spare screws)
6 x Legs (6 Leg Table)
26 x Tightening Screws for 6 Leg Table
(2 x spare screws)

Warning
Installation Steps
Determine the undershelf placement by marking the desired height
on the legs. Place the undershelf (“B” on its side and insert the legs
“C” through the bottom of the undershelf “B” with the gusset end first
“opposite end of the bullet feet”. NOTE: The undershelf “B” needs to
be at least 6” off the ground to be NSF certified. Refer to Figure 1 for
details.
Adjust the feet as needed to meet height requirements or to
compensate for uneven flooring. With assistance, turn the table over
and remove any protective films. The table is now ready to be used.
Refer to Figure 4 for details.
Insert the legs “C” into the stainless steel top gussets “A”. You may
need to loosen the screw “D” if one leg isn’t lining up exactly. Once
all legs are inserted into the gussets, tighten all set screws. Refer to
Figure 3 for details.
Tighten screws “D” on undershelf “B” to attach legs “C”.
NOTE: Don’t tighten completely until Step 3 is complete. Refer to
Figure 2 for details.
WARNING! Risk of personal injury. Stainless steel edges are sharp and can cause cuts. Wear gloves during installation
and handle with care.
Figure 3
Figure 1
Figure 2
Figure 4
R10001000559
Product specificaties
| Merk: | Atosa |
| Categorie: | Niet gecategoriseerd |
| Model: | ST2472ECR2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Atosa ST2472ECR2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden