Atlas Sound FAP62UL Handleiding

Atlas Sound Speaker FAP62UL

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlas Sound FAP62UL (5 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
AtlasSound.com 1/4
Š2017 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003678 RevF 1/17
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
FAP62T-UL2043
Strategy SeriesÂŽ II In-Ceiling 6" Coaxial Speaker System
3PECIÚCATIONS
Power Rating 50 Watts
Transformer Taps 2, 4, 8, 16, & 32 Watts
Frequency Response 63Hz – 20kHz (±7dB)
Sensitivity (1W / 1M) 88dB
Woofer 6" Poly Cone with Butyl Rubber Surround
Woofer Magnet Weight 14oz (398g)
Enclosure Volume 475 in3
HF Driver 19mm Coaxially Mounted PEI Dome Tweeter
Diameter 121/2" (318mm)
Overall Height 8.48" (215mm)
Cut-out Dimensions 11" (279mm)
&EATURES
• Extended Low Frequency Response from the 475 in
3 Optimally Tuned
and Ported Deep Drawn Galvanized Steel Enclosure
• Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring / V-Rail
Tile Bridge and “Dog Leg” Mounting System (Included)
• Front Mounted Tap Selector Switch for Easy System Tuning
Adjustments Include Transformer Bypass Setting for 8 Direct 1
Coupled Operation
• Unique “Trap Door” Input Section Allows for Through Conduit Runs
with Rigid or Flex Conduit
• 4 Pole Detachable “Phoenix” Style Connector Allows Easy Pre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Speakers or Subwoofers
• “Press Fit” Grilles Blend Better into Contemporary Architecture
• Enhanced Quality 70.7V / 100V Internal Transformers Minimize
Insertion Loss and Maintain Low Frequency Response While
Providing Increased Output for Higher SPL Applications
• UL Listed 1480 & 2043
!PPLICATIONS
The FAP62T-UL2043 combines superior coaxial loudspeaker performance
with even dispersion and easy installation. A low profile enclosure
and wide coverage make the FAP62T-UL2043 a perfect choice for low
ceilings. The FAP62T-UL2043 will satisfy the needs of owners, architects,
contractors, and consultants by delivering true, high fidelity sound
reproduction in an attractive and easy-to-install system. The
FAP62T-UL2043 is ideal for high-intelligibility voice, music, and signal
reproduction in commercial, industrial, and institutional applications. The
FAP62T-UL2043 is UL1480 and UL2043 Listed allowing for installation in
true plenum air spaces.
'ENERAL$ESCRIPTION
The FAP62T-UL2043's 110° dispersion angle can reduce the number of
FAP62T-UL2043’s necessary to achieve coverage in distributed systems
with low ceilings.
The loudspeaker component matches the performance of the legendary
Atlas Sound FA136 driver. High quality construction 6" coaxial cone
type driver includes a 1" voice coil and polypropylene cone with a butyl
rubber surround. The 19mm coaxially mounted tweeter is constructed of
PEI. A high sensitivity of 88dB average (92dB peak) means less power
may be required to achieve the desired SPL. This loudspeaker is factory
assembled in an optimally tuned and ported deep drawn enclosure
and includes a specially designed 32 watt low saturation 70.7V / 100V
transformer. A convenient front mounted selector switch allows tap
selection without the need to remove the speaker from the ceiling. This
switch also includes a transformer bypass setting for 8 direct coupled 1
operation.
IÚ
I
FAP62T-UL2043
AtlasSound.com 2/4
Š2017 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003678 RevF 1/17
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
-OUNTING!CCESSORIES
Mounting is simplified with Strategy Series® style “Dog Leg” tabs that
allow easy installation into drop tile or drywall ceilings with provided
tile bridge assembly. The tile bridge consists of two “V” shaped formed
mounting rails and a C-Ring assembly. The C-Ring can be attached to
the rails with the screws provided to extend support to the T-bar grid
in suspended ceiling applications. Multiple hole locations are provided
to allow the C-Ring to be positioned to the outer edge of the tile if
necessary.
For existing dry-wall applications the tile bridge C-Ring and support
rails can be inserted into the hole cut for the FAP62T-UL2043. For easy
positioning the “V” shaped support rails match the shape of the C-Ring
tabs for easy maneuvering and location when working “blindly" above
the deck. A uniquely designed “easy access" input panel on the side of
the enclosure allows for “through" conduit runs using flexible or rigid
conduit. Below this cover resides a detachable Phoenix / Euro style
locking four-pole connector, which provides for easy daisy chain wiring to
other full range 70.7V loudspeakers or Atlas Sound FAPSUB subwoofers.
The package includes an attractive press-fit grille, which nicely matches
contemporary architecture.
For new construction drywall ceiling applications, the optional FAP62-TR
trim ring is available. This unit provides a marked location for drywall
installers to cut around essentially reserving the desired location in the
ceiling until final installation of FAP62T-UL2043. Mounting holes are
provided to accommodate 16" or 24" OC stud / joist mounting.
A support ring is also provided on the top of the FAP62T-UL2043
enclosure to facilitate an auxiliary support cable. It Is recommended that
this secondary support be utilized in drop ceilings for safety and seismic
considerations.
!RCHITECT%NGINEER3PECIÚCATIONS
The loudspeaker system shall be Atlas Sound FAP62T-UL2043. System
shall include a high performance 6" coaxial loudspeaker, ported bass
reflex enclosure and press-fit grille for conventional ceiling installation.
Frequency response for the system shall be 63Hz – 20kHz (±7dB).
Sensitivity shall be 88dB average.
Loudspeaker shall be comprised of a 6" coaxial cone type driver. Cone
shall be constructed of polypropylene with a butyl rubber surround. The
19mm tweeter shall be constructed of PEI. Magnet shall be a minimum
of 10oz (283g) and the voice coil diameter shall be 1" (25mm).
Transformer shall be a 70.7V / 100V type with 2, 4, 8, 16, and 32 watt
primary taps (@70.7V) with a front mounted tap selector switch to include
transformer bypass setting for 8 direct coupled operation.1
Enclosure shall be a deep drawn steel enclosure design. Internal volume
shall be 475 in3. To facilitate connection in conduit systems, enclosure
shall be equipped with an access panel covering a recessed terminal cup.
This cover shall provide a combination 3/4" (19mm inside diameter) /
1" (25mm inside diameter) knock-out on the side access and a top
access compression fitting / strain relief to facilitate flexible conduit up to
22mm outside diameter or 1" (25mm inside diameter) conduit when the
compression fitting is removed.
External wiring shall be accomplished via a removable lockable wiring
connector with screw-down terminals to provide both secure wire
termination and pre-wiring capability before loudspeaker installation. The
4 pole locking connector shall facilitate in / out connections and shall be
located in the recessed area behind the conduit access panel.
Seismic support eye shall be provided on top of enclosure for additional
suspension point when used in drop tile ceilings. Construction of
enclosure shall be a minimum of 18-gauge deep drawn galvanized metal.
The system shall include a support backing plate to reinforce the ceiling
material and tile support rails for use on either 2' x 4' (609mm x 1219mm)
or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This assembly can
all be installed from beneath the ceiling tile.
Overall front face diameter shall not exceed 121/2" (318mm); overall depth
from the bottom of the ceiling shall not exceed 8.48" (215mm).
Grilles shall be press-fit, manufactured from 24-gauge perforated steel
mesh and finished in white epoxy. Round grill shall be 10.48" (266mm)
diameter.
The loudspeaker shall be the Atlas Sound FAP62T-UL2043.
C-Ring / V-Rails
FAP62-TR
AtlasSound.com 3/4
Š2017 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003678 RevF 1/17
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
Frequency (Hz)
SPL in dB
FAP62T-UL2043 Directivity vs Frequency
Frequency (Hz)
SPL in dB
FAP62T-UL2043 1/2 Space Frequency Response

Product specificaties

Merk: Atlas Sound
Categorie: Speaker
Model: FAP62UL

Heb je hulp nodig?

Als je hulp nodig hebt met Atlas Sound FAP62UL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker Atlas Sound

Atlas Sound

Atlas Sound IP-SDM Handleiding

9 Juli 2023
Atlas Sound

Atlas Sound M1000-W Handleiding

9 Juli 2023
Atlas Sound

Atlas Sound I8SM+ Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound PM8GD-B Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound SMA-15 Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound GD87W Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound DT22 Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound All Weather SM63T Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound PM8SUB Handleiding

8 Juli 2023
Atlas Sound

Atlas Sound AP-30 Handleiding

7 Juli 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024