Atlas Sound FAP42TC Handleiding

Atlas Sound Speaker FAP42TC

Lees hieronder de 📖 handleiding in het Nederlandse voor Atlas Sound FAP42TC (5 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

AtlasSound.com 1/4

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Strategy Series®)),OW0ROÚLE)N#EILING#OAXIAL3PEAKER

FAP42TC

Speciﬁcations

Power Rating 25 Watts

Transformer Taps 1, 2, 4, 8, & 16 Watts & 8 Bypass1

Frequency Response 83Hz – 20kHz (±7dB)

Sensitivity (1W / 1M) 88dB

Woofer 4" Poly Cone with Butyl Rubber Surround

Woofer Magnet Weight 10oz (364g)

HF Driver Coaxially Mounted PEI Dome Tweeter

Diameter 101⁄2" (267mm)

Overall Height 41⁄4" (108mm)

Enclosure Volume 134 in3

Cut-Out Diameter 9" (229mm)

Features

• Low Depth (4") Speaker System for Limited Space Applications

• Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring / V-Rail

Tile Bridge and "Dog Leg" Mounting System (Included)

• Front Mounted Tap Selector Switch for Easy System Tuning

Adjustment Includes Transformer Bypass Setting for 8 Direct Ω

Coupled Operation

• "Press Fit" Grilles Blend Better into Contemporary Architecture

• Enhanced Quality 70.7V / 100V Internal Transformers Minimize

Insertion Loss and Maintan Low Frequency Response While

Providing Increased Output for Higher SPL Applications

• UL 1480 Listed

Applications

Atlas Sound’s FAP42TC combines superior coaxial loudspeaker perfor-

mance with wide dispersion and easy installation. A low profile enclosure

and wide coverage make the FAP42TC a perfect choice for low ceilings.

The FAP42TC will satisfy the needs of owners, architects, contractors,

and consultants by delivering true, high fidelity sound reproduction in an

attractive and easy-to-install system. The FAP42TC is ideal for high-intel-

ligibility voice, music, and signal reproduction in commercial, industrial,

and institutional applications.

General Description

The FAP42TC's 130° dispersion angle effectively reduces the number of

loudspeakers necessary to achieve coverage in distributed systems with

low ceilings.

The loudspeaker component matches the performance of the legendary

Atlas Sound Strategy FA Series. High quality construction 4" coaxial cone

type driver includes a 1" voice coil and polypropylene cone with a butyl

rubber surround. The 19mm coaxially mounted tweeter is constructed

of PEI. This loudspeaker is factory assembled in a deep drawn enclosure

and includes a specially designed 16 watt low saturation, 70.7V / 100V

transformer. A convenient front mounted selector switch allows tap

selection without the need to remove the speaker from the ceiling. This

switch also includes a transformer bypass setting for 8 operation.Ω

&!04#

AtlasSound.com 2/4

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Mounting Accessories

Mounting is simplified with Strategy style “Dog Leg” tabs that allow

easy installation into drop tile or drywall ceilings with provided tile bridge

assembly. The tile bridge consists of two “V” shaped formed mounting

rails and a C-Ring assembly. The C-Ring can be attached to the rails with

the screws provided to extend support to the T-bar grid in suspended

ceiling applications. Multiple hole locations are provided to allow the

C-Ring to be positioned to the outer edge of the tile if necessary.

For existing dry-wall applications the tile bridge C-Ring and support rails

can be inserted into the hole cut for the FAP42TC. For easy positioning

the “V” shaped support rails match the shape of the C-Ring tabs for easy

maneuvering and location when working “blindly” above the deck.

A uniquely designed “easy access” input panel on the side of the

enclosure allows for conduit runs using flexible conduit. Wiring terminals

are concealed below this cover for easy daisy chain wiring to other full

range loudspeakers or Atlas Sound FAPSUB subwoofers. The package

includes an attractive press-fit grille which nicely matches contemporary

architecture.

For new construction drywall ceiling applications, the optional FAP42-TR

trim ring is available. This unit provides a marked location for drywall

installers to cut around essentially reserving the desired location in the

ceiling until final installation of FAP42TC. Mounting holes are provided to

accommodate 16" or 24" OC stud / joist mounting.

A support ring is also provided on the top of the FAP42TC enclosure to

facilitate an auxiliary support cable.

NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT

BE UTILIZED IN DROP CEILINGS FOR SAFETY AND SEISMIC

CONSIDERATIONS.

Architect & Engineer Speciﬁcations

The loudspeaker system shall be Atlas Sound FAP42TC. System shall

include a high performance 4" coaxial loudspeaker, low profile enclosure

and press-fit grille for conventional ceiling installation.

Frequency response for the system shall be 75Hz – 20kHz (±7dB).

Sensitivity shall be 88dB average. Loudspeaker shall be comprised of a 4"

coaxial cone type driver. Cone shall be constructed of polypropylene with

a butyl rubber surround. The 19mm tweeter shall be constructed

of PEI. Magnet shall be a minimum of 10oz (264g) and the voice coil

diameter shall be 1" (25mm).

Transformer shall be a 70.7V / 100V type with 1, 2, 4, 8, and 16 watt pri-

mary taps (@70.7V) with a front mounted tap selector switch to include

transformer bypass setting for 8 direct coupled operation. Ω

Enclosure shall be constructed of deep drawn steel. Internal volume shall

be 134 in3. To facilitate connection in conduit systems, enclosure shall

be equipped with an access panel covering a recessed terminal cup. This

cover shall provide a combination 3⁄4" (19mm inside diameter) / 1" (25mm

inside diameter) knock-out to conduit.

External wiring shall be accomplished via wiring connector with screw-

down terminals to provide secure wire termination. The connector shall

facilitate In / Out wiring and shall be located in the recessed area behind

the conduit access panel.

Seismic support eye shall be provided for an additional suspension point

when used in drop tile ceilings. Construction of enclosure shall be a

minimum of 18-gauge deep drawn galvanized metal.

The system shall include a support backing plate to reinforce the ceil-

ing material and tile support rails for use on either 2' x 4' (609mm x

1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This

assembly can all be installed from beneath the ceiling tile. Overall front

face diameter shall not exceed 10.5" (267mm); overall depth from the

bottom of bezel to top of enclosure shall not exceed 4.24" (108mm).

Grilles shall be press-fit, manufactured from 24-gauge perforated steel

mesh and finished in white epoxy. Round grill shall be 8.49" (216mm)

diameter.

The loudspeaker shall be the Atlas Sound FAP42TC.

&!04#

#2ING62AILS

&!042

AtlasSound.com 3/4

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Frequency (Hz)

SPL in dB

FAP42TC Frequency Response

Frequency (Hz)

SPL n dBi

FAP42TC Harmonic Distortion

Funda entalm

2nd Har on cm i 3rd Har on cm i

Frequency (Hz)

Ohms

FAP42TC Impedance (Ohms) vs Frequency

Product specificaties

Merk:	Atlas Sound
Categorie:	Speaker
Model:	FAP42TC
Kleur van het product:	Wit
Diepte:	267 mm
Hoogte:	108 mm
Gewicht verpakking:	5900 g
Gemiddeld vermogen:	25 W
Aantal luidsprekers:	1
Aantal per verpakking:	1 stuk(s)
Impedantie:	8 Ohm
Geschikt voor buitengebruik:	Nee
Speaker plaatsing:	Plafond-montage
Aantal drivers:	1
Woofer:	Ja
Frequentiebereik:	83 - 20000 Hz
Gevoeligheid:	88 dB
Luidspreker soort:	1-weg
Aantal woofer drivers:	1
Ingebouwde versterker:	Ja